Pot filler australia
The Block 2022: What is a pot filler tap explained including are they allowed in Australia | Tom and Sarah-Jane reveal their plan to include a Block kitchen first
If you've been watching The Block 2022, then you may be aware that Tom and Sarah-Jane in House 1 are planning to include a very interesting feature in their kitchen.
It's none other than a pot filler tap.
If you've never heard of a pot filler tap before then you're not alone, and thankfully we're here to help.
Stream the latest episodes of The Block for free on 9Now.
It's essentially an extendable tap that sits above your stove, allowing you to have easy access to water while cooking.
That's right, no more awkwardly shoving a big pot into your kitchen sink before struggling to get it back out. Instead you can simply use your pot filler tap, which usually sits flush against the backsplash above your stove or cooktop.
Pot filler taps aren't in most kitchens but they sure are handy.It's set up so that it can extend outwards above your stove when needed, and also be tucked against the wall out of the way while you cook. Pot filler taps are also known as pot filler faucets, pasta arms or kettle faucets.
READ MORE: Sarah-Jane reacts to Shaynna Blaze saying she should pursue a career in interior design after The Block 2022
"Pot fillers are the best thing that ever happened," Sarah-Jane beamed in the above video. "They just add a whole different level of amazingness."
Sarah-Jane is confident that adding a pot filler tap to her kitchen will be a big win for the team. (Nine)But the team's grand idea did have some pushback from Foreman Keith who paid Tom a visit to raise some concerns.
"It's causing a few issues," Keith said. "Our surveyor is saying no to [the pot filler tap], but I've heard you got in contact with the V.B.A (Victorian Building Authority) and they're saying maybe yes.
"
Tom confirmed there's no regulation saying pot filler taps aren't allowed in Australia.
Tom hit back at Foreman Keith's suggestion that the team might not be allowed to add a pot filler tap to their kitchen. (Nine)But this didn't completely reassure Keith, who then voiced his concerns about a tap being next to a stove.
"No different to a pot overflowing with water when you're boiling pasta," Tom responded.
Keith then raised the alarm once more. "It's a bit different to a tap. What if you forget to turn it off?" he asked.
"Well you're a (bleep) aren't ya," Tom replied, leaving Keith in stitches laughing.
Keith was left laughing after facing off with Tom. (Nine)Without a regulation saying that pot filler taps are illegal, Tom and Sarah-Jane remain determined to include one in their kitchen.
We can't wait to see if they end up installing one in their kitchen when the space is unveiled at Room Reveals.
In Pictures
Tom and Sarah-Jane's Guest Bedroom and Ensuite
A big risk pays off for the Blockheads.
View Gallery
The Block airs Sunday at 7.00pm and Monday to Wednesday at 7.30pm on Channel 9. Catch up on all the latest episodes on 9Now.
Stream the latest episodesEp 51 The AuctionEp 50 Landscape RevealEp 49 Landscape Week
Reasons Not To Include a Pot Filler In Your New Kitchen Design — Toulmin Kitchen & Bath
As your kitchen remodel becomes real, you are going to be asked to make decisions about a range of options by your kitchen designer. A pot filler faucet is one of those design options a growing number of people are asked to consider.
A pot filler is a faucet located on the backsplash over your range or cooktop. Pot Filler Faucets have an articulated arm that enables the tap swing out over the burners so you can fill large stock pots where they will be heated. Proponents say the biggest positive is reducing strain on your arms, back, and hands from lugging heavy, water-filled pots from the sink to the stove.
Others who have splurged on a pot filler feel that they are more of a hassle than they are worth.
When it comes to this type of specialty kitchen design accessory, the negatives can sometimes outweigh the positives. Even with the advantage of eliminating the burden of moving heavy pots from the sink to the stove, there are several issues to consider whether the additional cost of the pot filler faucet would be worth it.
A Potentially Leaky Faucet Over My Dual Fuel Range? I Don't Think So.With additional plumbing and an extra tap comes more chances that something will drop, drip or disconnect. A leaking pipe over a stove can quickly turn into a big problem, especially if you are not home at the time it begins. Water collecting in your oven, within the walls, or on your floor is not the kind of kitchen design you were going for with your remodel. No one wants to come home to find a water leak that has damaged the electronics within their costly Wolf range.
Another concern homeowners find is with the additional cleaning challenges. Any fixture near the stove is sure to collect grease and making sure the arm, the tap, and the pipe joints are clean is not always easy. Of course, merely reaching the entire arm may be hard if it is placed near the center of the stove.
Finally, you should consider how often you need to fill a pot with a large amount of water. If that only happens at your annual 4th of July party where you serve your famous steamed lobster, then maybe the pot filler faucet doesn't need to be a tool in your kitchen design arsenal. And while it may save you the hassle of moving a filled pot from the sink to the stove, remember, you do have to move it back to the sink to dump the water out after those lobsters are ready to join the corn on the cob and the cold beer.
Is it Really Worth The Cost for Something That's Used So Infrequently?Paying upwards of $1,200 extra for a properly installed double-jointed pot filler with two shut off valves is a costly option.
If you're a casual cook, who may only use the faucet a few times a year, it may not make sense. However, there are some instances where making the investment in a pot filler does make sense. If you are a serious home chef and you don't have a prep sink, a pot filler can make cooking meals more comfortable and more efficient. Likewise, if you have a larger kitchen, carrying a pot full of water weighing 20 or 30 pounds (water weighs 8 pounds per gallon) through your kitchen can be difficult, especially for older cooks. And finally, if you make large quantities of soup, stew, or cook pasta for your every Sunday for your family gathering, a pot filler might be a smart investment.
However, if none of this applies to your lifestyle in the kitchen, perhaps your money would be better spent on a microwave drawer, small appliance cupboard, or a set of place ware that matches your new kitchen design. Just think of how fabulous it will be to serve the wonderful meals you're sure to make in your new kitchen.
About Toulmin Kitchen & Bath Design - We're West Alabama's award-winning, premier kitchen and bath showroom. We're experts who are known for a design-build process that makes the construction process stress-free. Contact us to schedule an appointment for a design consultation.
Australia
Australian Aboriginal Art. Creative ideas
Australian Aboriginal Art. Ideas for creativity
Knitwear shop "Rukodelkino"
I'd like to share a bit of Australian Aboriginal art. Art originated in the process of centuries-old settlement of the continent and today is divided into two groups: art with elements of realism and conventionally geometric. The Australian Aborigines are called the most ancient culture living on our planet! The word "aboriginal" came from the English colonists and literally means "from the beginning." To date, this is the least studied culture on Earth, and it presents many mysteries that scientists have yet to find answers to.
Comfort, minimalism and spaciousness: characteristics of Australian street style
Comfort, minimalism and spaciousness: characteristics of Australian street style for the inhabitants of Europe, this is not such a significant moment as far as the purchase is concerned. Laconic, airy designs and ideas come to us from across the ocean. Previously, this other world was exclusively Japanese design. But now the Australian continent is picking up the pace, this can be seen in the number of emerging brands, fashion bloggers from Australia. In this regard, I became interested in what the locals wear in everyday life. On the example of the models of the brand "BNKR", which offers everyday items by Australian designers, you can see how this comes to life.
Fairy garden of Australia by sculptor Bruno Torfs
Fairy garden of Australia by sculptor Bruno Torfs
Marina Koneva Flowers silk
I could not pass by the greenest themed week at the Fair of Masters and not share with you the work of the fabulous artist and sculptor Bruno Torfs.
A person with boundless creative imagination, sense of humor, diligence and diligence. A unique symbiosis, if you can call it that, of human talent and the beauty of nature gave an amazing result, he created a sculpture park called "Bruno's Garden", located in the rainforest of Australia. The park initially contained only 15 large, man-sized terracotta sculptures, but over time it grew, and the collection consisted of more than a hundred sculptures.
Master class: Tilda style kangaroo
Master class: Tilda style kangaroo
Katerina Katorgina
First of all, I want to say that I have not seen a kangaroo master class online. And for some reason they rarely sew it, but it is so cute =) After all, a kangaroo with a baby can be a wonderful gift for a young or future mother, become a child's favorite toy or just decorate the interior. Therefore, in preparation for the MK in the studio, I decided to film the process. Perhaps my small master class will be useful to someone or encourage them to create this wonderful toy.
So let's go! We will need: - Fabric for the body - Fabric for the jacket, pocket and inside of the ears - Filling - Floss for embroidery ...
Stained glass magnet on a disc "Turtle"
Stained glass magnet on a disc "Turtle"
Lyudmila Vorontsova (Ikhtiandra)
I want to address this MC to all those who really want to try stained glass painting, but do not dare. In fact, it's not all that difficult. The main thing is desire and patience. The idea of writing CDs came to me a couple of years ago, and since then it has been my favorite hobby. There are undoubted advantages in this kind of creativity: CDs are always available, and most importantly, it turns out unusual and original! After all, the iridescent surface of the disk shimmers so beautifully, and the stained glass painting looks very beautiful on it. In addition, if you make a little effort and try, your work will become truly exclusive! Well, are you ready? Then let's go!
Felting workshop.
"Penguin"
Felting master class. "Penguin"
*Rat meadow* (asalinia)
Good day, dear craftsmen! By the end of January, winter finally came to us =) Let's make one of the inhabitants of the snowy expanses - a penguin. The toy is simple, so it is suitable for beginners. First, we admire the photos of cute chicks, get inspired and select the necessary coat colors.
Share
Recommended
Show all thematic products > Recommended >
Mexico
Mexican ornaments, stylized designs, authentic styles
India
Indian motifs in original works
Africa
African-style goods - ethnic clothing, prints, ornaments, decorations
Reptiles
Mysterious reptiles as inspiration for art and handmade
Bird of happiness
Author's works depicting various birds, in the form of birds, articles decorated with feathers
TUBE FILLERS/Fillers GORDIC F60 Suppositories
TUBE FILLERS/Fillers GORDIC F60 Suppositories +39 0331 1693557 inti@intisrl.
it
Our experience at your service
Packaging and equipment for the pharmaceutical, chemical and cosmetic industries
TUBE FILLING MACHINES/Fillers Suppositories GORDIC F60
We carry out a complete re-equipment of equipment
Tubelled machines/fillers of the Gordic F60
Equipment: Tubelled machines/fillers of the Gordic F60
Code of Equipment: IT026
Assembly: Gordic
Model: 1991 9000 Gordic F60 hard tube filler for tablets.
Capacity 60,000 tablets per hour.
Tablet diameter 18 - 25 mm.
Pipe height 100 - 210 mm.
Compressed air 6 bar.
Electrical data 220 V - 50 Hz.
Measurements (LxBxH).
Delivery tablet 1280 x 660 x 1320.
Filler 1420 x 920 x 1250.
Weight 320 kg.
All categories
-
quality control
[12] -
Incubadora
[5] -
BLISTER MACHINES
[27] 0116 Water treatment/Distillers/Reverse osmosis/Pure steam generators [12] -
containers/tanks
[24] -
SUBMICIAL AND UNCREMING MACHINGS
[9] -
[6] [6] [6] [6] [ -
Capsulonapolis/ Politers of capsules
[10] -
Carding machines/ wraps
[52] -
Complex lines
[28] -
Laboratory equipment
[1] -
The line of refueling and sticks
[1] -
ASeptic roser machine and Uspurka
[23] -
Machines for ampoules and flacers/blowing tables for the vials
[9] 9017 [9] 9017 [9] 9017 [9] 9017 [9] 9017 [9] 9017 [9] 9017 [9] And Ukuporka [9] -
Machines for sticks
[3] -
Wrap/Ondural vehicles
[13] -
Equipment for coatings
7 [6] -
[18] [18] [0118
-
mixers for liquids and creams
[1] -
mixers with high elaboration FLUID BED/DRYERS/DRYING OVENS
[12] -
TABLET PRESSES/TABLET DUSTERS
[22] -
TUBE FILLER MACHINES 9
004 For more than 50 years, the German company Bausch and Stroebel has been a manufacturer specialized in filling and packaging processes.
Its lines are used all over the world to fill syringes, vials, cartridges and clinics with liquid and powder preparations.
Inside his business, there are spots focused on packaging, filling and closing, but also dosage and labeling.
Almost all Bausch and Stroebel machines operate in sterile environments.
A German company that operates in the pharmaceutical sector and is responsible for the production of machines for special processes, from dust to coated tablet.
Italian company operating in the pharmaceutical sector, manufacturing machines for suppositories, compresses, fillers, shutters, counter-operators, mixers and packaging machines.
German company specializing in packaging; In 1970 he entered the pharmaceutical industry and bought Handlinger-Karg KG.
Today, the company employs over 6,000 employees who design, manufacture and install packing and packaging machines in the confectionery, food and pharmaceutical industries.
In the pharmaceutical sector, in particular, we find primary packaging machines such as compressors, such as control machines such as inspection machines and secondary packaging machines such as educators, educators, fillers, shutters, labels.
BWT AG
Beckman-Coulter
Binder
Italian company operating in the pharmaceutical sector and responsible for the production of machines for checking the integrity of the closure of containers (CCIT), vials and ampoules, pre-filled syringes, blisters, glass and plastic bottles and other containers.
Breitner is a German company founded in 1960 by Hans Breitner.
In terms of machine production, filling and closing machines for liquid food, cosmetics, chemicals and pharmaceuticals are the main actors.
However, there is also a special focus on designing complete line fills.
There is also no shortage of assembly and development work, supply of spare parts and provision of services.
Finally, Breitner bottle reorders are capable of handling a wider variety of container shapes and sizes.
An Italian company also based in New Jersey, USA, CEA Patents focuses on the pharmaceutical industry through the production of state-of-the-art inspection systems for injectable pharmaceuticals.
BREVETTI C.E.E.A. offers a full range of automatic inspection machines for injectable medicines contained in syringes, vials, vials, cartridges and bottles, as well as a selection of semi-automated inspection solutions.
Italian company operating in the pharmaceutical sector, producing washing machines, sterilization tunnels, ampoule fillers and much more.
Cadmach, a market leader, specializes in pharmaceutical tablet compression equipment.
However, Cadmach tablet presses can be used in other industries such as compressing various materials such as salts, detergents and metals.
In addition to the pharmaceutical sector, Cadmach also attaches great importance to the confectionery, electronics and vitamin and nutraceutical industries.
An American pharmaceutical company that manufactures innovative capsules.
The German company, founded in 1879, has always been focused on the packaging sector, producing over time individual machines as well as complete lines suitable for this purpose.
The main areas on which his work is focused are the pharmaceutical, cosmetic, food and non-food industries.
As far as its production is concerned, its boxes are up to date, which may be accompanied by additional components such as meteographs, printers or code readers. Film packing, case packing and pallets are also important.
Convel
Criopharma
An Italian company active in the pharmaceutical sector that manufactures sterilization autoclaves, depyrogenation ovens and washing machines.
Diosna was founded on 1 August 1885 by Friedrich Dirks and Julius Mallmann in Osnabriker; It is still based in Germany and presents as its subsidiary IsernH-ger GmbH and Co. kg.
With 130 years of experience, DIOSNA has been successfully operating in two different business areas:
Food industry machines and chemical and pharmaceutical machines.
In the pharmaceutical field, Diosna focuses mainly on mixing, granulating, coating and drying processes.
Born just after World War II, Eisai is the world's leading R&D company headquartered in Japan.
It offers innovative products in various therapeutic areas where there are multiple needs, such as oncology and neurology, in order to improve access to various essential medicines.
Electrand was founded in 1966.
The activity is mainly focused on the industrial segment, with the design and construction of plants for primary water treatment.
Electracqua is currently a leading supplier of clean and ultra-purple systems to several high-tech industrial segments such as pharmaceuticals, biotech applications, microelectronics/semiconductors, power generation, cosmetics companies.
Founded in 1951 in Germany, Erweka is one of the leading international manufacturers of test equipment for the pharmaceutical and biological industries, as well as for research and testing laboratories and universities around the world.
Among the various products he deals with are dissolution testers and systems or for measuring flow, friability, density, etc. ...
Italian company operating in the pharmaceutical sector, manufacturing thermoforming machines for vials, vials, syringes, suppositories, eggs and blisters.
An Italian company operating in the pharmaceutical sector and dealing with the production of sterilization, washing, biodisinfection, depyrogenation and sterility testing machines.
Headquartered in Schwarzenbeck near Hamburg, but with branches in 11 other countries: China, Belgium, Brazil, England, France, France, India, Mexico, Singapore, Spain, USA.
Concentrating its activities throughout the entire production process, its production mainly includes flatbed presses, capsule filling machines, as well as packaging tools, format components and equipment. Process
American pharmaceutical, food and chemical company that manufactures powder processing machines.
Faster
Faster S.r.l.
Swiss pharmaceutical company that manufactures medical gel machines and disperses liquid powders.
Biacore
Italian company operating in the pharmaceutical sector, dealing with the production of tablet machines and the management of products subjected to fermentation, lidophilization, separation or containment.
Swedish pharmaceutical company that sterilizes pharmaceutical and hospital supplies.
GF
A Swedish pharmaceutical company that manufactures machines for inserting tablets into rigid tubes.
Italian company, founded in 1970 by Renato Grandi, specializes in the design and manufacture of automatic packing and packaging machines.
It specializes in the production of equipment such as: curators, groups, trainers, manufacturers, counting and packaging lines and packaging lines for coffee, disposable products.
In addition, in case of special requirements, it produces various types of machinery such as: Tray coach, quality control machines such as glasses, palletizers, capsule lines and bread and pastry lines.
La Calhene
Founded in 1954 by Werner Glatt and headquartered in Binsen, Germany, Glatt represents Glatt Air Techniques Ing among its subsidiaries. Glatt Pharmaceutical Services.
It is the market leader in dust recycling and recycling systems.
It offers end-to-end solutions from primary particle production to processing to finished tablets and supports customers in the pharmaceutical, food as well as feed and fine chemicals sectors, through Innovative technology solutions.
Founded on April 11, 1980 by Horst Groninger, the company specializes in the development of custom machines for the pharmaceutical, cosmetics and consumer industries.
In the pharmaceutical sector, the main actor is the technology for processing pharmaceuticals in vials, syringes, cartridges and bottles for eye drops and nasal sprays; In cosmetics, on the other hand, there is a greater concentration on the body and hair, through the production of creams, make-up, perfumes, fragrances, color care and nail polish.
German company active in the pharmaceutical sector and involved in the production of machines for packaging tablets, capsules, vials, ampoules, syringes, bottles and tubes.
Hamo
German company active in the pharmaceutical sector and responsible for the production of liquid machines and capsules.
ILINOX
IMA is a world leader in the design and manufacture of automated machines for the process and packaging of pharmaceuticals, cosmetics, food including dairy products, tea, coffee and tobacco.
The IMA Group covers around 80 countries with its sales network and representatives.
In its extensive work, the IMA develops numerous solutions for various sectors, with the help of nomenu; For example, in the pharmaceutical sector, it offers technologies for dosing, aseptic handling, filling and seophonization, as well as blisters, capsules and tablet counters, tube fillers, aseptics and full line end solutions.
In the food industry, on the other hand, winding machines (e.g. for cheese, butter, margarine, margarine, etc.), filling machines for bags, as well as filling and welding machines for preformed cups and trays, filling and welding machine, and the end of the line.
The company also offers equipment for handling, dosing, mixing, granulating or compressing dust and technologies for assembly and disassembly.
IMA BFB was founded in 1974 and is part of the IMA group; it has a long tradition in the design and manufacture of end-of-line and secondary packaging machines.
Its packaging machines, wrapping machines, educators, palletizers and depalettzers cover a wide range of speeds and cater to the following markets: confectionery, pharmaceutical, dairy and food products, tea, coffee and beverages and personal care.
In the pharmaceutical sector, the company has extensive experience in the transfer, shaping, gluing and high-precision movement of vials, boxes or bottles.
IMA SAFE is part of the IMA Group and offers complete primary and secondary packaging lines for the pharmaceutical, nutraceutical and cosmetic industries.
Its production includes machines such as body, filler and packer; However, IMA Safe also boasts the widest range of blister solutions on the market, from clinical trials and highly customized tray packing solutions to high speed blistering.
A pharmaceutical company that joined the IMA group in the 1980s.
Zanasi is a company acquired in the 1980s by the IMA group, in which its capsule filling machines were the first successful ones.
Thanks to its equipment, it is capable of dosing powders, granules, tablets, microtablets and liquids into hard gelatin capsules, depending on the configuration of the machine and the installed dosers; A distinctive feature of these machines, in addition, is the ease of use, which is highly appreciated.
German company active in the pharmaceutical and cosmetics sector and responsible for the production of filling and packaging machines.
Idroinox
Inoxycal
Italproject
A German company founded in 1875 in Berlin and then moved to Cologne, in 2013 it joined the Romaco group.
Specializes in the production of equipment dedicated to the pharmaceutical, cosmetic, food and chemical industries, and its production mainly includes compressible flatbed machines; You can find:
- High-performance flatbed presses with built-in wetting system;
- Standard tower press;
- Single-stroke laboratory machines for research and development work.
German pharmaceutical company and tablet machine manufacturing.
German company active in the pharmaceutical and cosmetics sector and responsible for the production of filling and packaging machines.
The German company is a manufacturer of plastics and its products are divided into three areas of specialization: food and consumer products, pharmaceuticals and medical devices.
Pentaplast is a global leader in rigid and flexible packaging, specialty film solutions serving, among others, the pharmaceutical, healthcare, food, beverage and card markets.
kmpt
LAB EQUIPMENT bioMérieux
An Italian company operating in the pharmaceutical and cosmetic sector, producing turbo emulsifiers, mixers and other machines.
German company active in the pharmaceutical sector and responsible for the production of water treatment machines.
Lighthouse
Founded in 1938 in Paderborn, its current location, it offers high quality partial systems and services for process applications in various industries in the fields of mixing, granulation, coating, drying, reaction and related processes.
His work mainly covers the fields of chemical, cosmetic, metallurgy, food and pharmaceutical industries; Therefore, vertical and horizontal mixers, contact and liquid dryers, horizontal and vertical granulators, reaction and pouring technologies are especially noticeable in production.
Italian company active in the pharmaceutical sector and responsible for the production of filling machines and shutters for liquids and powders.
Founded in 1974 by Massimo Marchesini, the company is headquartered in Italy but has a large network of foreign companies and offices in over 68 countries.
Entering the haves in the packaging industry, Marchesini Spa achieves significant success through the expanded production of machines and complete packaging lines dedicated to the pharmaceutical and cosmetic industries; In fact, in their business there are bottle machines, bottles, vials, syringes and disposable capsules, packaging systems in blister, solid tube, stick packs, strips and bags, and still labels, packers, guardians, palletizing systems, fillers and flag shutters.
Robotic power solutions are also integrated.
Mear
The Italian company MG2, founded in the 60s and 70s, has been specializing for many years in the pharmaceutical, cosmetics and food industries, taking its business immediately to the international level.
In 1997, after 30 years of focusing on the capsule filler industry, MG2 decided to expand its product range to the packaging sector, thus gaining more experience in the development of packaging machines such as: blister machines, actuators, formers, and box and tray fillers. , vertical and horizontal producers, palletizers, serialization systems for encumbrances, bottles and boxes.
Manesty Pharmaceutical Company is currently one of the leading suppliers of tablet compresses and coatings.
In 2011, Bosch acquired Manesty Ltd from OYSTAR Holding GmbH.
Mengibar
Millipore
Multipack is a company capable of providing simple and competitive solutions in all areas of packaging, an area in which it has been operating since 1985, packaging, labeling and product packaging: from baked goods to electronic components, from explosives to frozen.
It specializes in the agri-food field and in its production you will find film packers who are the most
Horizontal and vertical packaging, automatic tags and label printers/applicators/software, barcode solutions, inkjet markers and ink boxes, dispensing machines, scales, weight control systems, metal detectors, handling systems, rollers, conveyor belts and automatic birthmarks , bandages, beacons.
NUOVA OSAR
The company started its activity in the 1970s in Florence with production mainly dedicated to washing machines and bottle sterilization.
Neri is currently specialized in the production of labeling machines with various structures used on a wide range of products and lines: bottles, boxes, bottle bags, mascaras, lipsticks and cosmetic containers in a wide variety of shapes and medium to high speeds.
The acquisition of Neri by the Marchesini group was formalized and finalized in 2008.
Founded in 1977, the Italian company Nicomac is the market leader in modular white room systems for the GMP environment and for the pharmaceutical, medical and life sciences industries.
In addition to the design and production of white rooms, it also has a large production of filming and confectionery systems, mixers and granulators, liquid bed dryers, calibrating mills, compressors and insulators.
Nikka Densok
Novinox
Since 1950, La Pago has been developing, manufacturing and marketing automatic labeling, factory labeling, label printing software and networking solutions. Produces and sells high quality decorative self-adhesive labels.
These are labels, such as bottles and bottles, diversified into decorative, multifunctional and informative label stickers.
PALL
Italian company active in the pharmaceutical sector and responsible for the production of filling machines, caps and labels.
Panasonic Healthcare
Partena began experimenting with the development of plastic materials for pharmaceutical packaging in the late 1950s and is part of the CAM group for which she produces blisters.
The main packaging machines include tablets, capsules, vials and syringes.
PennTech Machinery Corporation was founded in 1992.
Today, PennTech is the only brand in the United States to manufacture complete lines for aseptic vial handling and its specialty applications at low to medium speed (less than 200vpm), although it also offers many machines that exceed 400vpm.
Its work is mainly focused on the production of vials, loaders, sewer tunnels, aseptic fillers, closures, outer vials, lipoloaders, loaders and peripheral equipment.
In 1888 Emil Pester founded it in Saxony (Germany) under the name Emil Pester Platininfabrik, which after his death was taken over by his son Karl Hermann Pester.
It developed significantly in the 1990s and in 2005 introduced a new generation of machines on a modular design model, with the introduction of "Pac Robot".
In the years that followed, Pester came into contact with the biotech and cosmetics industries.
For over 45 years, he has set trends in end-of-line pharmaceutical and cosmetic packaging from film packaging, box packaging, palletizing.
Today, pester pac automation is among the leading companies in the industry. More than 8,000 Pester machines and lines demonstrate their intelligence every day in multinational corporations around the world.
Pharmatech has extraordinary experience in the design, construction and verification of projects of all sizes and types in the pharmaceutical, biotech and medical fields.
Inside its production, you can find dryers for research, LyoPro advanced freezer tray dryers, freeze-dried accessories, fermenters and bioreactors, white cameras.
Ponzini
Prb is an Italian company that manufactures, assembles and manufactures machines with final composition for packaging.
His business is the production of educators, followers, trays and batteries for the food and beverage industry, as well as the packaging of candy and tobacco.
German company active in the pharmaceutical sector and responsible for the production of filling machines, caps and labels.
For more than 35 years RBP Bauer has been the market leader in the construction of debating machines, thus aimed at the mechanical emptying of pharmaceutical blisters.
This process results in the production of equipment that allows efficient and reliable product recovery from defective blister strips.
Part of the Italian group Sph Group S.r.l.
Romaco Pharmatechnik presents as its subsidiaries Romaco S.r.l., Romaco Innojet GmbH, medipac AB, Romaco North America Inc.
Founded in 1989, it develops, manufactures and markets in the pharmaceutical industry and among processed machines granulators, machines designed for packing, coating and filling tablet tubes, but also cutters, asters, liquid fillers, vacuum cleaners, as well as tablet presses and equipment with the end of the line.
Rommelag was founded in 1964 and is headquartered in Bux.
With its machines, the company is the world leader in the aseptic filling of liquids and semi-solids.
The plants operate with the blow-fill-seal (BFS) technology invented by Rommelag: a process that, in a single work cycle, allows the creation of sterile, aseptic fillings and hermetic closures for plastic containers.
Its equipment is mainly designed for the pharmaceutical, chemical and food industries.
Italian company active in the pharmaceutical sector and involved in the production of packaging machines.
Romaco Macofar is a company specialized in pharmaceuticals and cosmetics, focusing on the dosage and filling of liquids, powders and pharmaceutical granules.
In addition, in the pharmaceutical sector, its equipment is suitable for both human and veterinary medicine.
In its activities, it offers solutions such as: Aseptic and non-aseptic filling machines for liquids and powders, capsule fillers, bottle and vial washing equipment, bottle and vial tunnels, Tafers, Laminated flow concepts.
A German company that operates in the pharmaceutical industry and is involved in the production of blister machines.
Rotary
R.Deckert is a German company that concentrates its activities in the pharmaceutical and cosmetics sector.
Its production includes the filling and packaging of liquids, pastes or tablets and capsules, as well as capping and labeling.
Therefore, cappers, fillers and labels of liquids and tablets prevail among the produced machines.
Italian company that operates in the pharmaceutical sector and is responsible for the production of suppository machines.
German company operating in the pharmaceutical sector and producing inspection machines.
Skinetta Pac-Systeme specializes in packaging, through a line of machines in the industry, and was acquired in 2007 by the German company Christ Packing Systems GmbH & Co.
Steelmas is part of the Masco Group and develops complex and large-scale projects using over 60 years of experience in building complex systems for the generation, storage and distribution of clean utility systems (Purified Water, Water for Injection, Clean Steam) for the pharmaceutical and biotech industries.
Stillmas clean steam generators are able to solve any problem of sterilization of pharmaceutical equipment and process lines.
The Sartorius Group is a leading international partner in the biopharmaceutical and research industries, helping scientists and biotechnological engineers around the world to develop and manufacture medicines.
The focus is on the biopharmaceutical, chemical, food and beverage industries.
From consumables and laboratory water treatment systems to industry-leading weighing technologies, its solutions also include liquid management, fermentation, filtration and liquid management.
Schmucker S.r.l.
Sejong
Setpack
Founded in 1989 in Lake Como (Italy), Steriline is a European manufacturer that specializes in lines for the aseptic processing of injectable products, mainly for the benefit of the pharmaceutical sector.
In particular, the focus is on mechanical and robotic applications for the aseptic handling of toxic or non-toxic products, liquids or powders, in vials, boosters, cartridges or syringes.
As part of its production, equipment ranging from washing machines, tunnels, filling and capping machines, external decontamination machines and barrier systems such as LAF, oRABS, cRABS and isolators are prioritized.
TGM is an Italian company that has been designing and manufacturing automatic filling machines for over 30 years for filling and capping aluminum, polyethylene, polyethylene or laminated tubes and alternating and continuous movements.
Fillers for filling products such as cardboard tubes as well as bottles, vials, cartridges, syringes and dispensers. Single machines or complete filling lines for the cosmetic, pharmaceutical, chemical and food industries.
The company has been an integral part of the Marchesini Group since 1996.
Already operating in the world of packaging machines, Tonazzi has also developed a range of automatic machines aimed at filling and closing pots, mascaras and lipsticks at low, medium and high speeds, but also for filling tubes and counting amplos, tablets and capsules.
Thus, the sectors the company focuses on are pharmaceuticals and cosmetics.
Thermo Scientific
The German company Uhlmann was founded in 1948, when Josef Uhlmann began to manufacture suppository molds.
He designed and developed his first machine in 1956: it is a strip machine.
In 1963 his son Friedrich joined the company and the first packaging machines were built for the pharmaceutical industry.
In the 1970s, the UpS series of blisters were born, which are still flexible and versatile machines appreciated all over the world.
In the 80s, Ulman also started building a women's trainer to fit his blisters.
Today, the company offers faster and more compact blisters and cleaners.
Ulman is one of the world leaders in the construction of packaging machines for the pharmaceutical and nutraceutical industries.
Vetraco has been designing, manufacturing and supplying equipment for the production, packaging and assembly of color cosmetics for 40 years.
However, over time it has also focused on applications in the parapharmaceutical sector, clinical trial reagents, cosmetic packaging assembly, mechanical and electrical components, and the automotive industry.
It offers bespoke lines, from prototype to automatic production line.
Volpak was founded in 1979 in Barcelona, Spain, as a manufacturer of form-fill printing horizontal packaging machines (also known as HFFS) for the pharmaceutical and food industries.
10 years later, he starts producing vertical packers.
In 1995, Volpak became the first company to develop a complete line consisting of bagitrium, cartridge and machine shop.
In 2001, Volpak acquired Enflex, a Spanish manufacturer of horizontal feud races known throughout the world.
Today Volpak is one of the world leaders and offers a wide range of HFFS infused products for pharmaceutical, food, nutraceutical, cosmetics, beverages, personal care and more.
It is also part of COESIA, a group of industrial companies specializing in packaging solutions, which includes more than 9,000 employees, 21 companies and 87 manufacturing plants in 38 countries.
Founded in the 1930s by André Zalkin in Paris, the company is still based in France.
Zalkin specializes in the design, manufacture and commissioning of custom capping machines at a wide variety of speeds and for various industrial sectors such as the firm and carbonated beverage industry, which is also the main activity in the food, cosmetics, pharmaceutical and chemical industries.
Zanchetta, a manufacturer of pharmaceutical machines for powder processing and granulation, joined the IMA Group in 2007.
