Unclogging kitchen sink drain

Kitchen sink not draining? Here are 6 ways to unclog it

There I was, minding my own business, washing the dishes after dinner like I always do. Just moments into scrubbing and rinsing the frying pan, I noticed that the water wasn't draining from the sink. I checked to see if anything was blocking the drain opening - nothing. I switched on the garbage disposal, but that was only a temporary fix. As I continued washing dishes, the drainage was only getting slower. With a clogged sink on my hands, my after-dinner cleanup was about to get more intense.

I'm sure I'm not the only one to experience the inconvenience of clogged drains. Clogged kitchen sinks are among the most common drainage issues to plague homeowners, largely because food debris and soap residue are nightmares for smooth draining. Thankfully, clogged drains are also one of the easiest home repairs to make on your own. However, before you roll up your sleeves and get into the do-it-yourself spirit, make sure you're aware of the plumbing myths that could lead you astray.

When it comes to the kitchen sink, for instance, don't think Drano and other chemical-based drain cleaners are the easy, go-to fix. The chemicals can sometimes cause more damage to your system, even if the clog seems fixed initially. Plus, backsplash from stubborn blockages could seriously harm your skin and eyes. You can avoid these catastrophes with other clog repair methods, some using common household items and others requiring some straightforward plunger or plumber's snake action.

Don't call the plumber yet! There's a good chance you can fix the problem yourself with one of these six methods to unclog a kitchen sink:

1. Attack with boiling water

When hair, grease, soap residue and other debris get stuck in your drain, boiling water may be all your pipes needs to loosen the blockage. It's the simplest fix, which means it should be your first move when trying to unclog a sink.

Easy as 1-2-3, here are the steps to follow:

Bring half a gallon of water to a boil on your stove or use a kettle to heat the water.
Pour the boiling water directly into the drain opening.
Turn on the faucet to see if the water drains in a steady fashion. If it's still draining slowly or standing still in the sink, repeat the process.

Important note: Don't try this method if your drain is attached to PVC pipes, as the boiling water could melt or damage the plastic.

If the boiling water fails to dislodge the clog after the second try, it's time to move on to another method. Unfortunately, you have yourself a sink clog that's too stubborn for the simple boiling water approach.

2. Check the garbage disposal

If your sink has a garbage disposal, it could be the culprit of your drainage issues. If the clog is in the disposal, turning it on will usually break up the blockage. Overheated or dysfunctional disposals may not even turn on, but you can activate the reset switch at the side or bottom of the unit for an easy reboot. After resetting the disposal, try turning it on again to clear the clog.

If you turn on the disposal and hear a low humming sound, the unit could be jammed or broken. Before doing anything to fix your disposal, remember to disconnect the power to the unit and never - and we mean never - stick your hand in the disposal. From there, you can try to break up the clog in the disposal by turning the blades manually. You can do that by inserting an Allen wrench into the hole on the bottom of the disposal, and twisting until you feel less resistance, meaning the blockage is beginning to break up. If that doesn't work, follow these tips to unclog your garbage disposal. Once unclogged, turn the power back on and test the disposal. If all looks and sounds good, turn the faucet to see if the sink drainage is back to normal.

Keep in mind that your garbage disposal inspection may not reveal any clogs or issues, in which case you can skip straight to a different unclogging method.

3. Plunge away the blockage

Once you establish that the disposal isn't the problem, it's time to bring out the plunger. But keep in mind: While you can use the toilet plunger if it's all you have on hand, Dengarden suggested using a flat-bottomed one for the job. With your plunger at the ready, follow these steps:

Fill the sink with hot water until it's about halfway full and creates a seal around the drain.
Position the plunger over the drain and begin pumping up and down quickly several times.
Remove the plunger and wait to see if the water drains.
Repeat the process until the water drains freely.

If the sink still isn't draining properly after multiple plunging attempts, you know the drill. Time to try a different method.

4. Break it down with baking soda and vinegar

This approach is a natural alternative to using chemical drain cleaners on clogged drains. Much to your convenience, baking soda and vinegar are also common household items that you're likely to already have in your kitchen. Follow these steps to let the mixture work its magic:

Remove standing water from the sink with a cup or bowl.
Pour one cup of baking soda down the drain, using a spatula or spoon to push the powder down the drain if necessary.
Pour one cup of white vinegar down the drain opening.
Place a stopper or cover on the drain to seal the opening.
Let the mixture sit for 15 minutes.
Remove the cover and run hot tap water down the drain.
Use boiling water to break up more intense clogs.

As with any unclogging method, this natural alternative doesn't have a 100% success rate. However, if it seems like you're making progress on the clog after completing the steps, repeat the process to double down on the blockage.

5. Try the plumber's snake

The clogs that put up a fight will require the strength of a plumber's snake to battle the blockage. The tool has a coiled spiral snake that reaches down into the drain. Once the snake hits an obstruction, you can crank the handle to dislodge the debris and pull it out of the drain. Electric snakes pack even more power to tackle clogged drains.

If you don't have a plumber's snake, you can create a makeshift one with a wire coat hanger. Simply use a pair of needle-nose pliers to unwind the hanger into a long piece of wire. Keep the hooked end, as this is what you'll use to grab onto the debris. If necessary, you can use the pliers to adjust the angle of the hook so that it can easily fit through the drain opening.

No matter which tool you're using, simply feed it down the drain a few feet at a time. Try not to push too roughly, as you might accidentally push the clog further down the pipe. When you feel the tip of your tool hit an obstruction, hook it on and pull the debris up through the drain. Keep doing this until you feel confident that the blockage is gone. Run hot water down the drain to see if you're right.

6. Clean the P-trap

If the water is still not draining correctly, there might be a blockage in the P-trap, aka the elbow-shaped pipe under your sink. Food, grease and other debris may be stuck in the pipe, causing your sink to drain slowly or not at all because the water hits a snag on its way down.

The fix is disassembling the pipe to clean out the gunk that's causing the blockage. Warning: This task can get a little messy, so you might want to prepare yourself with gloves, goggles and towels. When you're ready, follow these steps to clean the P-trap:

Place a bucket underneath the pipe. This will catch any backed up water or debris that may fall out when you open the P-trap.
Unscrew the connectors on the trap that hold the curved piece to the vertical and horizontal drain pipe. There should be a slip nut on either end of the P-trap.
Remove the P-trap and clean the pipe of all debris, grime and residue.
Reconnect the trap.
Turn on the faucet to run water down the drain.

If the drainage situation is still not up to par, the clog may be farther up the pipe. Back under the sink you go to find the source of the blockage. Here's what to do when you get there:

Repeat the steps to remove the P-trap.
Remove the horizontal pipe that connects the system to the wall.
Feed a plumber's snake, auger or coat hanger into the wall pipe. When you feel an obstruction, use your tool to pull the blockage out from the pipe.
Repeat the process until you remove all debris.
Reassemble the pipes and P-trap, tightening the connectors by hand. (Pro tip from Home Depot: Do not over-tighten, as this may cause the connectors to crack.)
Run hot water to flush the drain.

Before you celebrate your handiwork, check under the sink while the water's running to make sure there isn't any leaking from the pipes. If you do notice leaks, make sure all the connectors are tightened. Once you're free from the drips, dry any water spillage from under the sink or on the floor and you're good to go.

If you've made it to this point and your sink still isn't draining, there could be a larger issue at play. It's time to give in and schedule an appointment with a plumber for a professional fix.

How to prevent future clogs

Now that your kitchen sink is draining properly again, make sure you're taking measures to prevent clogs from coming back. The most important preventative measure is refraining from disposing of harmful items down the drain. That includes:

Grease, fats and oils.
Meat.
Coffee grounds.
Egg shells.
Starchy foods, such as pasta, rice or bread.
Fruit peels, pits and stickers.
Gum.
Paint.
Paper products, such as paper towels or food wrappers.

Instead, pour cooking grease in an old can and dispose of the container once it's full. You can add certain waste, including coffee grounds, to mulch or compost piles.

The Home Depot also advised homeowners not to overload the garbage disposal. Try not to grind more than one cup of food waste at a time, and, of course, avoid sending any of the above items to the disposal. Another pro maintenance tip: Create an equal solution of vinegar and water, and freeze the mixture in an ice cube tray. About once a month, grind a few of the cubes down your disposal to scrape away food-waste buildup and keep the unit fresh. Here are more garbage disposal do's and don'ts to keep your drains clean and clear.

Another good habit for your pipes sake is running hot water down the drain after each sink use to keep everything clear. You might also want to use a drain cover to catch debris before they cause damage in the pipes.

While clogged drains are an easy DIY fix, being prepared for serious plumbing troubles before they arise is always a good strategy. See how plans from HomeServe can help with the costs of covered repairs.

How to Unclog Your Kitchen Sink

Home
Blog
9 Ways to Fix a Clogged Kitchen Sink

It can feel helpless when a clogged kitchen sink won’t drain. With water backing up and a counter full of dirty dishes waiting to be cleaned, it may be tempting to reach for the phone and call the plumber to fix the problem for you.

While you can do that, an alternative is learning some tips and tricks for how to unclog a kitchen sink yourself. With a little elbow grease and some expert tips, you can tackle this DIY project any day.

1. Check the garbage disposal.

One of the first things you should do if your kitchen sink is clogged is to unclog the garbage disposal. Run the disposal for a minute or two with the hot water running to see if that clears the clogged drain. If that doesn’t work, make sure the disposal is turned off and carefully inspect it to ensure it’s running correctly.

If the disposal has overheated and automatically switched off, you may need to restart it at the base. The base “on/off” switch can usually be found on the side or bottom of the disposal unit underneath the sink.

Learn more about what to put in a garbage disposal as well as natural garbage disposal deodorants to keep it smelling fresh and clean.

2. Get out the plunger.

If clearing the disposal didn’t unclog your kitchen sink, it’s time to reach for a common household sink plunger. Head to your local hardware store to purchase a kitchen sink plunger, which is smaller than the one that you use for the toilet.

If you have a double sink, first seal off the drain on one side with a wet cloth or a stopper. You’ll need to create a tight seal around the plunger, so fill the side of the sink you intend to plunge with enough water to cover the bell of the plunger. Place the plunger firmly over the drain and plunge vigorously several times. When you hear the suction clear the clog, remove the plunger, and flush the sink drain well with warm water for a couple of minutes.

3. Boiling Water

Boiling water is the easiest and least expensive kitchen sink drainer of all, which makes it the best one to try if the plunger doesn’t do the job. Here’s how to use boiling water to clear your drain:

Place a kettle or pot of water on the stove and bring it to a rolling boil.
While you’re waiting for the water to heat, remove as much standing water from the sink as possible, using a mug or small pot to bail out the water.
Pour the entire kettle of water into the sink and let it sit for a couple of minutes. If the water stands in the sink without draining, the clog is still there.
Give the water time to cool for about five minutes and then remove it by scooping out as much cooled water as possible with the mug or pot and disposing of it in another sink.
You may need to repeat the process several times to move the clog, but this strategy often works on many types of blockages.

4. Use Items in Your Pantry as a DIY Drain Cleaner

Did you know that you don’t always have to use harsh cleaners to unclog your kitchen sink? You may have a natural drain cleaner sitting right in your kitchen. Here are some ideas:

Use salt and boiling water. Sometimes you can unclog a drain with salt. After removing as much standing water from the sink as possible, pour about half a cup of table salt down the drain. Then, pour in about a quart of boiling water. Let it sit for a few minutes and then flush with hot water to clear the mixture.
Try a DIY baking soda and vinegar drain cleaner. Remove any standing water from the sink before trying this technique. Pour about a cup of baking soda into the drain, followed by an equal amount of white or apple cider vinegar. The solution will soon start to bubble; when it subsides, put the stopper in and wait about 15 minutes. Next, run the hot water to see if the clog clears. Repeat the process one more time if the water is draining but slower than normal (that means the clog isn’t fully clear yet).
Use baking soda and salt. Mix about a cup of baking soda with half a cup of salt, and pour this mixture down the drain. Let the mixture sit for several hours, then flush with boiling water. You can repeat this process if it doesn’t clear the clog.

5. Use a coat hanger.

A wire coat hanger can be a great tool if your kitchen sink is clogged. It won’t reach into your kitchen sink plumbing as far as a plumber’s snake would, but it may be long enough to reach some clogs.

Insert the straightened hanger wire into the kitchen drain or “stub pipe” to push through or pull out the clog if you can reach it. Be careful not to scratch your sink with the wire.

You may also want to invest in a plastic drain clog remover tool to help get rid of the gunk. This tool is designed to help remove hair from your slow-draining sink or shower, but it can also be used to catch stubborn food particles in your clogged kitchen sink. Just be careful to go slowly and gently—the thin plastic can break off and cause more problems.

6. Try a plumber's snake.

If the coat hanger didn’t work, head to the hardware store and purchase a plumber’s snake. Also called an auger, a plumber’s snake is a handy tool that can clear clogs stuck farther down the drainage system under your kitchen sink.

You’ll have to disassemble the drainpipe and P-trap that runs underneath the kitchen sink to expose the “stub pipe” or “stub out” that travels behind the cabinet wall. This is where you insert the snake into the pipe until you feel resistance to break up the clog.

7. Clean the P-trap.

The P-trap is at the curved part of your kitchen sink pipes, usually inside a cabinet. Cleaning your kitchen drain’s P-trap may be necessary to clear the clog.

First, place a pan or bucket underneath the drain to catch any water or debris that may fall out.
Then, unfasten the P-trap from the drainpipe and clear out anything that is stuck.
Finally, replace the P-trap (make sure all connections are closed tight) and run warm water through the pipes for a few minutes.

8. Make prevention a priority.

Sink drain clogs are a normal occurrence, but there are some ways you can prevent them. If you have a kitchen garbage disposal, don’t overload it. Feed items in a little at a time, and wait until they grind and run through completely before adding more. Make sure you use garbage disposal cleaning tips to keep the appliance working properly.

Don’t ever put bacon grease, coffee grounds, or oils down your kitchen drain or in your garbage disposal. Also, always make sure you run plenty of water down the drain after each use.

It’s important to know how to maintain and care for all of your home's plumbing components and systems to keep things running smoothly.

9. Get a home warranty.

Knowing how to unclog a sink on your own can be very helpful, but sometimes you need help from a professional. With an American Home Shield® home warranty, you can simply submit a service request for a covered issue with your plumbing system, and we’ll send a qualified technician to your house to diagnose and repair it. Our plumbing warranty includes stoppages for the sink, bathtub, shower, and toilet. No more searching for plumbers online and hoping for the best. Our warranty coverage makes it easy to get your plumbing issue fixed.

American Home Shield covers up to 23 key home systems and appliances so you can be confident in your household and protect your budget when breakdowns occur. Check out our prices and plans to find the right coverage for your home.
AHS offers Appliance Warranties and protection plans.

AHS assumes no responsibility, and specifically disclaims all liability, for your use of any and all information contained herein.

NO TWO HOMES ARE THE SAME. THAT'S WHY WE HAVE OPTIONS. FIND A PLAN THAT FITS.

Shop Plans

What to do if the sink in the kitchen is clogged: how to clean the blockage with your own hands

All ways to remove the plug:

Ways to remove simple and complex blockages

Soda, salt, vinegar
Household chemicals
Plunger
Vacuum cleaner
Rope, soft shaft, metal band
Siphon disassembly

Prevention

What to do with a blockage in the kitchen sink? We have collected all the existing ways to solve this problem. It happens that it is difficult to fix the problem with these methods. This suggests that the pipes are clogged with debris and grease due to mechanical damage or improper installation of plumbing. In such a situation, you will need the help of a specialist.

But in most cases, everything can be fixed on your own. When there is no strong congestion, and the water only lingers a little in the sink, improvised means or even simple boiling water from the tap are enough. This is the first thing you can do - turn on the hot tap for 10-20 minutes. The thin fatty layer on the walls should dissolve. If this does not work or is not possible, proceed to the next options.

For a plastic drain, the water temperature must not exceed 60°. In metal, you can pour boiling water from the kettle.

Instagram @ultimateplumbinginc

Instagram @waterliberty

In general, all methods can be divided into chemical and mechanical. First, we will talk about the first and start with folk advice. What if you need to act now, but there is no opportunity to buy a special tool? Use what is in almost every home.

Soda, salt, vinegar

They help to break through a very small cork and remove an unpleasant odor. There are three recipes.

Mix one mug of soda and half a mug of rock salt, dissolve them in water and pour it all into a pipe. After five or ten minutes, turn on the strong pressure of hot water.
Drain the sink if a lot of liquid has accumulated in it. Pour a glass of soda into the drain, pour a glass of 9% vinegar on top. Close the drain and leave for half an hour. After a break, everything must be washed off with boiling water.
Sprinkle salt and baking soda overnight to keep them out of the water during this time. Dissolve them in the morning.

Citric acid can be used instead of baking soda.

Remember that the plastic siphon should not be exposed to high temperatures.
What to do if the problem cannot be solved? We tell you how to clean the blockage in the sink in the kitchen in this case.

Household chemicals

There are a lot of products sold in stores to remove traffic jams. They are dry, gel and liquid. Select the appropriate solvent based on the characteristics of the material to be cleaned and the degree of contamination. Some of them cannot be poured into plastic. This information is indicated on the packaging.

The most popular brands are Krot (may require several treatments and two bottles), Bagi Potkhan, Sanoks Pure Stock. They are sold in various forms, but more often in liquid form. Other names: Tiret Turbo, Sanfor, Selena, Chirton. Good reviews about Deboucher. The liquid does not damage fragile materials, breaks down fat and softens solid waste, works within a few hours and is economically consumed.

With pothan granules, manufacturers advise to be especially careful and stay away when using them. They have a very pungent smell.

The algorithm is simple: the required amount of product is poured or poured into the drain for an hour or overnight. During this time, you can not use the sink. After that, they wash off what is left.

Instagram @ulyana_koronova

Instagram @defrem.com.ua

When working with household chemicals, follow the rules

Pre-clean the pipes for 20 minutes with boiling water (steel) or hot water with strong pressure (plastic).
During the process, be sure to wear gloves, open a window or window so that the room is well ventilated.
If product comes into contact with skin, wash immediately with plenty of cold water without soap.

The following method is used alone or in addition to the two listed. But it's better to work together.

Plunger

Another item that is sure to be in every home. You should not rely on it if a tight plug has formed in the drain, but small contaminants can be cleaned without problems.

So, what to do with the plunger if the sink in the kitchen is clogged

Pour some water into the sink and tightly close the drain hole with the plunger. If it has two sections, you will need two plungers at the same time. If they are not there, plug the second well with a damp cloth and hold it with your hand.
The overflow hole, if any, is also closed - with a rag and hand.
Press the plunger several times and pull it sharply towards you.
Check the water drain rate and repeat the procedure if necessary.

A regular beaker can be used as a tool. True, this will only work for very minor contaminants.

Pixabay

Overflow opening to be closed

Instagram @muzhnachas. bytovyeuslugi

Vacuum cleaner

This method can be called experimental. There is no certainty that it will work. To make it work, you need a powerful vacuum cleaner with a blowing function. The pipe must be wrapped with a rag, placed in the drain hole and the device turned on. According to the plan, the cork should collapse from the created pressure.

Plumbing tools

A kitchen sink can become so clogged that none of the previous methods will work. In this case, you can not do without a more complex procedure.

Rope. The most common fixture. You can buy it at a hardware store or make your own. Care must be taken when cleaning plastic parts - they are easily damaged.
Flexible shaft. Thicker and longer cable wrapped in a spiral. Suitable for wide pipes. It is used to destroy old contaminants formed in hard-to-reach places.
Wire. Wire of small diameter with nozzles. It can be used to retrieve objects that have fallen into the drain and remove traffic jams. It deforms when turning, therefore it is considered an impractical and disposable tool.
Metal tape. A narrow strip 2-3.5 cm with a small tip. Well punches long pipes, convenient and durable.

How to use the cable

Grab the tool by the handle and push it inward by turning it clockwise.
When you hit a blockage, increase the intensity of your movements.
Remove debris and then let water through the hole. At first, the pressure should be small.
Before you start, check the integrity of the cable and whether the handle and attachments are firmly attached to it. Instead, you can use a metal hanger. It is cut with wire cutters so that there is a small hook at the end.

Open a window or window - the smell during work can be very unpleasant. After that, treat with household chemicals to wash off the fat.

Instagram @tros_santeh

Instagram @masterphc

Structural Disassembly

Sometimes this is the best way to fix a problem. Debris can accumulate in the siphon, and it is cleaned only by separating it from the rest of the plumbing or after partial dismantling. The corrugated pipe also collects grease on its surface, making it difficult for the sewer to work properly.

It doesn't take any special skill to sort it all out. You will need a wrench, a bucket or basin, a rag, a screwdriver, a cork pusher, and a stain remover.

How to disassemble the structure

Place a container under the siphon. It is filled with water and it will pour out as soon as you remove part of it.
Use a wrench to unscrew the cleaning hatch cover at the bottom if you have a standard model.
If it is bottle-shaped, remove the sump by hand.
Remove all debris and rinse under running water.
A plug in a pipe is usually removed with a cable without any problems, and the fat will dissolve in boiling water with household chemicals or soda.

Sometimes the siphon cannot be partially removed. In this case, it is removed completely by unscrewing the upper and lower fasteners.

Instagram @momoffarmboys

Instagram @bronzastudio1

The sink can get clogged every month if some preventive measures are not taken. The simplest of them is to skip boiling water from a kettle or hot water from a tap every week for 15-20 minutes. So you dissolve the fat adhering to the walls of the pipe. If the problem occurs on a regular basis, you can pour household chemicals or soda with vinegar along with boiling water.

A strainer that prevents food waste from seeping down the drain is a must-have kitchen attribute. The siphon also needs a mesh to filter drains. Do not shake crumbs, tea leaves into the sink, do not pour greasy food. Sometimes you can find advice about installing a grinder for leftover food. In fact, it does not eliminate the possibility of blockage, since small particles still stick to the surface.

Finally, a visual video instruction that tells what to do if the sink in the kitchen is clogged, how to clean the drain. This is the most efficient way out of all. Especially if the water is no longer leaving the sink.

Prepared by

Nelli Kirgintseva

How to clean a blockage in the sink - folk and professional remedies

A blockage in the sink is a common occurrence, even if the hostess maintains perfect cleanliness in the house / apartment and thoroughly flushes the sink from grease and dirt, and prevents food debris from entering the drain system. How to clear blockage without effort? It's simple - call a plumber and believe that he will come on time and do his job efficiently. But instead, you can do it on your own, especially since there are a lot of options.

  Contents:  1. How to clear a blockage in the sink with a plunger 2. How to clear a blockage in the sink without a plunger 3. Special tools for cleaning blockages in the sink 4. Mechanical cleaning of blockage in the sink

How to unblock a sink with a plunger

A very popular, well-known plunger for a long time is a real lifesaver in moments of sink clogging. The principle of its operation is simple - under pressure, a water hammer is created in the drain pipes, which contributes to the passage of accumulated dirt.

The plunger must be attached with the rubber side to the hole in the sink so that it is completely closed. Then 3-4 sharp shocks are made, during which you can hear the characteristic gurgling sounds in the pipes. Then the plunger is removed and, as a rule, the water from the sink begins to actively drain. If the drainage of water goes badly, then you need to repeat the procedure with a plunger. If dirt / debris / food particles rise up, they must be removed immediately - if they enter the drain again, they will again create a blockage.

A plunger is the answer to the question of how to clean the sink in the bathroom, because this method is suitable for any drain systems, including toilets.

How to unblock a sink without a plunger

If there is no plunger in the household, then you can use folk remedies, the basis for the preparation of which is ordinary baking soda. It is this product that has the ability to dissolve fats, which causes the cleaning of the drain system in the sink. So, the blockage in the sink can be removed in the following ways:

pour three tablespoons of baking soda into the drain hole in the sink, then rinse everything with hot water, preferably boiling water;
Pour three tablespoons of baking soda with vinegar in an amount of 100 ml, wait 15 minutes - during this time the chemical reaction in the vessel will end. Then the solution is poured into the hole of the sink and after 3 minutes everything is washed with hot water;
Take equal amounts of ordinary washing powder and baking soda, pour into the sink drain system. Then pour vinegar in the same amount in the amount of 200 ml and after 2-5 minutes rinse everything with hot water.

These cleaners are great for even tough clogs, and baking soda works on both kitchen sinks and bathroom sinks. If the blockage happened in the kitchen, then most likely the cause of this will be fat accumulations - they are easiest to dissolve with vinegar, so in this case it is better to use the second recipe from the above for the cleaning procedure.

Sink blockage cleaner

There are a lot of such products on the market - they are aggressive, guarantee almost instant results. The task is to choose a cleaning agent that would not only quickly and efficiently remove blockages in the sink, but also be safe. We suggest using the products of the manufacturer "Nevskaya Cosmetics" - a means for cleaning pipes from blockages "Mr. Chister". It has excellent quality characteristics:

removes clogs in 15 minutes;
dissolves even hair and grease, but is completely safe for pipes;
disinfects;
eliminates unpleasant odors, even if the blockage in the sink is already old.

In addition, the Mr. Chister pipe cleaner is equipped with a special cap that prevents children from trying to taste the contents of the bright bottle. Before opening the bottle, you will need to press the cap and, holding it in this position, turn it - this is the only way the remedy will open.

See how quickly "Mr. Cleaner" dissolved the hair, and did not damage the spoon and plastic cup at all:

Removing a blockage in the sink is not difficult, but it is much more expedient to simply not let it happen. According to statistics, blockage occurs due to fat accumulations in the pipe, and they are taken just from the inner surface of the sink. This suggests that when cleaning the kitchen space, attention should be paid not only to tiled surfaces, but also to the sink - with special tools of the Mister Chister line from the manufacturer Nevskaya Cosmetics, even frozen fat can be removed and blockage can be prevented.