Home » Misc » Raised garden bed front of house

Raised garden bed front of house


Flower Bed Ideas for the Front of Your House

Are you looking for front yard flower bed ideas? Then look no further! These 10 top ideas will give your home instant curb appeal.

Every editorial product is independently selected, though we may be compensated or receive an affiliate commission if you buy something through our links. Ratings and prices are accurate and items are in stock as of time of publication.

1 / 10

Jorge Salcedo/Shutterstock

English Country Garden

What could be more breathtaking for flower bed ideas front yard than a quintessentially English country garden? Use traditional cottage garden plants like speedwell (Veronica), catmint and forget-me-nots. And be sure to include some classic English roses, too.

Place taller plants at the back, with lower growing species in the front, and you’ll have the perfect front yard garden bed against a picket fence.

2 / 10

Jeanie333/Shutterstock

Pots & Planters

If your front yard garden space is limited, then pots and planters are a great way to display your annual and perennial flower to the world. Pots and planters are easy to maintain, although of course, they do need regular watering. Help water retention by using good quality compost and water retaining crystals, or go the whole way with self-watering planters.

3 / 10

Artazum/Shutterstock

Superb Shrubs

If you’re looking for low maintenance flower bed ideas for front yard, then shrubs can be a fabulous choice. There’s a mind-blowing range of shrubs to choose from, including many evergreen varieties for year-round interest.

Many shrubs also have flowers, so choose a range of shrubs to provide a display all year, such as witch-hazel, dogwood and cotinus (smoke tree) for winter interest, and camellias, azaleas and rhododendrons for spring. If you want low-maintenance front yard flower beds with blooms, you can always underplant the shrubs with spring bulbs or summer annuals.

4 / 10

Del Boy/Shutterstock

Eye-Catching Flower Wall

For immediate eye-catching impact, a stunning flower wall is hard to beat. One of the simplest ways to add curb appeal to your home, a flower wall can hang on an exterior wall or a front fence with equal effect.

Hanging varieties of plants are the best choices for a flower wall, such as lobelia, trailing fuchsia, bacopa or nasturtium, because the trailing plants will mask any supports, like a trellis or post. Alternatively, make a feature of the planters and use succulents for textured interest.

5 / 10

Karneichyk Yauheni/Shutterstock

Raised, Tiered Beds

Raised, tiered flower beds are one of the best flower bed ideas for the front yard. They’re space-saving, provide an interesting focal point and are easy to maintain. Wooden raised beds can be tiered, making them easier to reach for gardeners with mobility issues. Almost any style of planting looks good in raised beds, from formal bulb flower beds, to shrubs and specimen trees, to summer annuals. Plants can stand to attention to emphasize height or tumble over the edges for a softer look.

6 / 10

Simone Hogan/Shutterstock

Drought-Tolerant Plants

If your house front basks in the full sun, you’ll want to choose a front yard flower bed idea using drought-tolerant plants. By choosing your varieties carefully, you can still have superb front yard flower beds. Taller plants, like pampas grass, bird of paradise flowers (strelitzia), aloes and euphorbias, can provide color, texture and structure, while lower-growing alpines and succulents can fill in the gaps with some striking pops of color when they come into flower.

7 / 10

SingjaiStock/Shutterstock

Cool Contemporary with a Splash of Color

Sometimes less is more, and simple flower bed ideas for front yard can work especially well for contemporary styling. Often these planting schemes are more about interesting structure than about a riot of color, so keep the palette limited, such as using evergreen shrubs with one eye-catching injection of color. Close-cut hedging, such as a trimmed boxwood hedge, teamed with imposing yuccas and garden palms, give the flower bed structural interest, while colorful shrubs like cordyline and pieris add a splash of vibrancy.

8 / 10

rawmn/Shutterstock

Raised Stone Beds

For a truly beautiful backdrop to a manicured lawn, natural or manufactured stone raised flower beds are hard to beat. As well as the beauty of the stone, you can also create undulating lines to edge your front yard flower beds. Again, dense hedging can be used for background structure, while flowering shrubs and roses can bloom happily in front.

At the front, a carpet of spring-flowering bulbs can give way to colorful summer bedding so your flower beds always look superb.

9 / 10

Yuiy Chertok/Shutterstock

Hanging Baskets

Another great option for your front yard flower ideas is to use hanging baskets. Whether you opt for impact with multiple hanging planters, or making a bold statement with a couple of outstanding focal hanging baskets, the possibilities are endless.

There are dozens of gorgeous trailing plants to choose from. Mix and match for variety, choose one plant for a harmonious look, or go completely unconventional with trailing tomatoes. If you have space, then why not mirror your hanging basket plantings with a few ground planters and pots as well?

10 / 10

Cheryl Lee-White/Shutterstock

Unique and Unusual Planters

And last but not least, to give some unique ambiance to your front yard flowers, consider a planting idea that’s a bit wild and wacky. A vintage bicycle hung with flower planters, is a great way to attract the right sort of attention, while a planted wheelbarrow, rowboat or baby’s pram will also add some unusual curb appeal. A wheelbarrow can also make a fantastic planter, and could even be moved around from spot to spot. A row of boots full of trailing succulents will raise a smile, as will a fence hung with old blue jeans planted up with flowers.

Originally Published: May 28, 2019

Elizabeth Manneh

Elizabeth is an experienced freelance writer, specializing mainly in digital health & transformation, health & wellness, and education & learning. She's been published on ReadersDigest.com, Paysa.com, The Family Handyman, Huffington Post, Thrive Global, and The Good Men Project. She was also a regular contributor to Love Live Health and Daily Home Remedy. Elizabeth is a retired primary school principal and education consultant, with a continuing passion for education and learning.

Here’s how – Flourishing Plants

Building an elevated bed against a house is useful for planting flowers, fruits, vegetables, and other different types of plants. It can save huge space in your garden and normally built-in corners.

Garden soil can cause a house to become weak due to moisture and root ingression into the foundation. Building a garden bed against a house can be done safely by using a barrier placed between the soil and the wall. An added layer of protection can be used by building the garden bed 12 to 24 inches away from the house. 

When it comes to constructing anything foreign close to a house, good planning is crucial to prevent damage to your house. 

I have used a plastic sheeting which I’ve found on amazon for a great price. It prevented potential moisture ingress when constructing my raised bed garden. You can find it by clicking here.

View on Amazon

Building a raised bed against a house is not a common practice, and there are a few things to consider before you start laying down your grand plan.  

These are –

Related articles you may find helpful –
Termites in raised bed garden
How to protect a brick wall against soil and moisture
Why do tree roots cause concrete to crack

Contents

How to Build a Raised bed Against a House

The following steps must be followed to build a raised garden against your house:

1. Dig down into the soil

Deeply dig the ground (almost 10-20 inches deep) for the construction of a bed. Compact the surface soil with the help of a heavy log and level the surface using a level meter for good drainage. 

2. Cast bricks around the excavated area

Construct a framework of the raised bed with bricks, so finished front and back part of an excavated area with cement blocks or bricks.

3. Line a layer of bricks as a veneer in front of the house wall

You can join the bricks to the wall or line another layer in front of or parallel to the existing wall.

 4. Install a waterproof barrier

Now install a waterproof thick plastic sheet or cotton fabric to make the barrier between the wall and bed.

5. Line the Bottom of the Raised Bed Garden

Line the bottom of a garden with organic material which would add nutrients to the soil as it is being broken down. This is also done to help fill the garden bed without having to add a lot of nutrient rich soil which will increase the cost of the project.

6. Add Filler

This can be any kind of organic material such as tree barks, logs, wood chips, hay or even old soil from a previous garden.

7. Add soil

Add a layer of soil mixed with nutrients and organic fertilizer on top of the organic material.

8. Add plants

Now the bed is ready for different plants such as flowers, fruits, veggies, or mixed ones.

Constructing your own raised bed can be a task at times. We have found a good, easy-to-assemble raised bed on amazon that is durable and functional. You can find it by clicking here!

The Downside of having a raised bed against a house

When you want to design your garden rooftop or courtyard through raised beds beware their demerits before construction:

1.

Lack of sunlight 

One thing to consider when building a raised bed against a house is sunlight. If the wall is south facing, then you would not have much problem.

In the northern hemisphere, the sun will provide almost 12 hours of full sunlight during the daylight hours which is beneficial to the plants that are on the southern side of a wall structure.

However, if the wall is eastern or western facing then the amount of sunlight that the plants will receive will be limited. This will affect the overall production of crops during the growing season (beginning of spring to the end of fall)

2.

Waterlogging and Salinity problems

Over the course of time if a barrier isnt used to protect the house structure from moisture, the walls will begin to absorb water and weaken. 

This in turn will lead to cracks if any pressure is placed on the house foundation by the natural movement of soil.

3.

Promotes pests and insects


Having soil against a house, in this case, the walls of a house can bring unwanted pests into your home. 

Termites are subterranean insects which thrive in moist and dark conditions. Termites get nutrients from cellulose, an organic fiber found in wood and plant matter.

This means that they can eat into any wooden structure in your home and can easily make any home unlivable by weakening its structure.

Waterproofing to protect the foundation of the House

The foundation of the house must be protected from underground and outside water seepage. 

To make sure that water does not enter the wall’s foundations you should use a waterproofing system.

There are several methods you can use to prevent moisture ingress into a wall’s foundation. 

Here we have listed the more popular methods –

Heavy polyurethane coating 

This coating is a synthetic coating and is usually two to three times thicker than normal coatings. 

The purpose of the coating is to prevent moisture ingression from the outer walls into the inner parts where it can cause stresses and cracks over time.

Concrete Penetrant  

Penetrating sealers work by increasing surface tension on the concrete. 

These products will create hydrophobic water-shedding, meaning water will quickly be repelled from the sealed concrete surface instead of soaking in.

Fiber Cement Board – Prevent water ingress

Fiber cement board is one of the better choices of building materials that work on home exteriors to prevent moisture from ingressing into the house’s foundation. 

The pores in the concrete fiber are too small for water molecules to ingress and cause a problem.

Epoxy for Walls

Epoxy acts as a protective and decorative paint to prevent moisture ingress on cement-based substrates, such as concrete, plaster, cement-mortar, and cement boards. 

Pool Liner

Using a pool liner before the addition of soil and other substrates on a garden bed can help prevent water from going in the wrong direction.

Bitumen Paint

Bitumen paint acts in a similar manner to epoxy, which coats and protects the walls surface against the negative effects the bare dirt can have on a wall.

It is very cheap, readily available and can be easily applied using a paintbrush. 

Preventing Root Damage Using a Tree Root Barrier –

A tree root barrier will not directly protect the wall from soil. 

What it actually does is prevent roots from trees and plants from venturing close to your home by posing a hard barrier to prevent growth in unwanted directions.

Roots can cause cracks to concrete structure and house foundations by absorbing moisture causing the soil to subside beneath the foundation. A void is created which removes the support from under the foundation causing stress and unwanted cracks.

Additionally, the roots themselves can place additional pressure on the foundation and walls as they grow bigger which also causes stress and cracks.

Benefits of using a barrier lining during construction

A barrier lining is very useful in the construction of raised bed gardens and will help protect walls and other foundations from the effects of having plants closeby. 

  1. A lining can protect close-by walls from wandering roots.
  2. It can also maintain run-off water in the soil. 
  3. Keeps the soil protected from weeds and pests such as termites.

Keeps Roots at Bay

Roots can cause cracks to concrete structure and house foundations by absorbing moisture causing the soil to subside beneath the foundation.

A void is created which removes the support from under the foundation causing stress and unwanted cracks.

Promotes Water Runoff 

Raised bed gardens are constructed so that it utilizes amended soil for the efficient growth of plants and vegetables. 

This soil would therefore have properties that would 

Protection from weeds and pests

A lining barrier would prevent weeds from the existing soil from infiltrating into the nutrient rich soil that is intended for your plants.

If they are allowed to do so they can rob your plants of nutrients by competing for space within the raised bed.

Additionally, pests like termites are naturally found in untreated soil and can also easily infiltrate into the amended soil mixture. 

Termites in your raised bed can cause problems if you are using wood as the siding material and they can easily eat through hence weakening the raised bed structure. As a result, the wood would break with very little pressure.

Will the Soil Affect the House?

Yes! The soil will affect the house because as the soil sits against the brick and mortar structure, the moisture from the soil will slowly start penetrating into the house. 

Over the course of time, the wall structure will weaken from routine watering of the plants in the raised bed.

It can also provide passage to underground soil termites and insects to enter the house, so it will never be a good idea to simply place soil against any wall structure without the proper protection in place.

Should you Join the Garden Bed to a House?

Garden beds can be joined to a house. However, over time, if bricks are used as the siding material, it can come loose from the house wall because it was not part of the initial structure when the wall was being built. 

To prevent any soil from washing away when this happens you can line the raised garden bed with a protective liner as previously explained.

Many homeowners when they have bought their new homes and have inherited previously owned garden beds and are faced with this same problem.

The parts of the garden bed which joins the wall, just separates. 

What you can do to fix the issue which may seem a crack is to fill it. A simple mortar filler mix will do the trick.

Can Roots Cause Damage to the House?

Plant roots can damage the housel by:

When roots absorb water, the moisture level is lowered, resulting in shrinkage of the soil. This shrinkage causes movement of underground soil, and the foundation is disturbed. 

The same happens when water is lost during transpiration, and pressure is developed on the walls by the roots that will cause cracks to concrete.

For this reason, it is also recommended that raised bed gardens be constructed 1 to 2 feet away from a house so that the walls would not be affected by the roots from the garden.

How to Stop Roots in an existing garden

If you want to prevent root problems in your existing raised bed, you will have to install obstacles to stop spreading plant roots in raised beds. 

Or you can simply dig a 1-ft deep channel around the outer limits of the raised bed and compress the soil at the bottom to compact it and make it more difficult for the occupying roots to grow.

To stop roots from becoming a problem in the garden you can use Herbicides applied directly to the soil surface that are carried down into the root system with rainfall or watering. 

The chemicals kill the roots when they come into direct contact with them. Chemicals that work in this way include bromacil, hexazinone and tebuthiuron.

The Takeaway

Raised bed gardens are eco-friendly and sustainable.

They enhance the scenic beauty of the home while at the same time, utilizing very little space.

In order to have a garden bed against a house you have to put in place the necessary protection so the soil would not compromise the strength of your home’s structure. .

how to make, from boards, metal, slate, plastic

Many summer residents suffer from the fact that groundwater is too high on the site. Excessive soil moisture is not suitable for all plants, many develop poorly or die altogether. You can solve the problem by making high beds. With such an organization of landings, it is possible to control the degree of humidity. And a nice bonus to such a decision will be an earlier ripening period and a much larger yield.

Content of Article

  • 6 DIY high beds
    • 6.1 From planks
    • 6.2 From logs
    • 6.3 From slate

    • Advantages and disadvantages that the sun warms the walls. This is also facilitated by the decomposition processes occurring in plant waste, which make up a significant part of the backfill. Therefore, such beds are also called warm.

    If you put arcs on such a bed and cover it with spunbond or other similar material, then the crop can be harvested even earlier. nine0003

    The device is more problematic in regions with a hot climate. The task in this case is not better to heat the earth, but to keep it from overheating. But this can also be solved: use materials with poor thermal conductivity, for example, wood, to fence high beds. For the best effect, you can make double walls, between which you can fill up, for example, sawdust, lay foam, or you can leave an air gap - the best thermal insulation. It is better to paint the outer wall in a hot climate with white paint or whitewash. It is known that light surfaces heat up less. In this case, it will be possible to save the root system from overheating: in the south, the earth sometimes warms up very much and the higher the plant is, the cooler it will be. And over the beds you can stretch the same covering material. It not only retains heat, but also protects against overheating. nine0003 Beet harvest in a high bed

    High beds can also be a good yield on infertile lands. It is more convenient to lay out the imported soil in the beds, and not distribute it throughout the site. Maintaining fertility contributes to the compost layer, which is located under the layer of earth.

    The problem of arid regions is also being solved. In this case, the fence for a high bed is coated with bituminous mastic from the inside or covered with a film, a rolled waterproofing material is laid on the bottom (on the grid) (the roofing material will quickly rot, so something from modern types of waterproofing is better). Complete waterproofing cannot be achieved, but to keep moisture inside in sufficient quantities - yes. nine0003 Carrots - one to one. The best on a high bed, although the same variety

    was planted on a regular one. As you can see, with a balanced approach, almost any problem can be solved. There are few shortcomings in high beds, but they were not without them:

    That's all the shortcomings. If you decide on the arrangement of high beds, be prepared for a considerable amount of work. But the harvest will be many times greater. For testing, you can make one or two beds. Then decide if you need them or not.

    Size

    There are no strict recommendations in this regard, and there cannot be: very different conditions in the country, and people too. There are sizes that many consider optimal.

    In one area there are very high beds and not very ...

    So, the dimensions of the high beds:

    So that the bed is not too high, part of it can be deepened: dig in 20-30 cm, and already put walls on top. The removed soil will go to backfill (there is often simply not enough land), and the substrate from the lower rough layers can be made thicker. And to minimize the cost of maintaining such a bed, you can do drip irrigation. nine0003

    How to fence high beds

    You can use anything that can hold the soil. The most durable curbs are made from brick, stone and concrete.

    Beds made of concrete and stone can be made like this

    But a brick costs a lot, it takes a long time to fiddle with concrete. A concrete fence is made according to all the rules: first, a formwork into which reinforcement is laid, then it is poured with concrete and they wait until it sets. But the service life is impressive - decades.

    Concrete garden fences are the most durable and will never “float”

    The brick and stone fence is also folded according to all the rules: on the mortar with dressing. To reduce the consumption of bricks, the walls are placed in half a brick. And so that the earth does not move it, the rows are reinforced with a mesh.

    Half-brick brickwork alone cannot hold soil. Support poles required

    But even with this option, support poles will need to be installed one meter apart. If your soil is viscous, heavy, often waterlogged, such walls can be squeezed out. Therefore, put wooden or metal supports that will fix the long walls or make small beds, as for an ornamental garden. nine0003 Brick raised beds for ornamental gardens

    Fences made of expanded clay blocks have proven themselves well. Even the voids in them can be covered with soil and plants with a small root system can also be planted there: for example, some types of greens and salads.

    Fencing for high beds made of expanded clay concrete blocks

    They also make fences for high beds from galvanized metal and slate. Slate can be used second-hand, you can buy a new one, wave or smooth - it doesn't matter. Cut the sheets into strips of the required width. There is no need to fear that it is harmful. In slate, asbestos is contained in a bound state, and it does not dissolve in water. It is harmful when it is sawed: the dust rises and enters the body through the respiratory tract. To reduce exposure, wear a respirator and wet the incisions. nine0003 High slate beds

    They make plastic garden fences. Changed siding? Use it. There are old plastic panels - they are in business. But for plastic, a rigid base is needed. They make it from a metal mesh of thick wire.

    Raised beds in wire baskets

    Nets can form the basis for pebbles or pellets. Only in this case, a double frame will be needed, inside which stones or some other material are poured. This technique is called "gabion" and not only fences for beds and flower beds are made from it, but also fences. But so that water does not seep through the walls from the gabion beds, the inside of the box is lined with a dense film. nine0003 Filled stone fence for high beds

    The most popular fence is made of wood. You can use boards, timber, logs. Wood is good for everyone, except that it rots.

    Really high beds

    And since all the conditions for activating this process are created in the high beds, destruction occurs rather quickly. You can slow down the process somewhat by painting the boards or by impregnating them with a bioprotective composition. But there is still no guarantee against destruction.

    Board cuttings can also be used for high bed borders

    But the material can be used cheap, and sometimes even junk: the remains after construction, slabs, old logs, pallets, etc. If desired, you can even make a fence out of branches. Only the bark is desirable to remove: it is under it that there are many larvae and woodworms. Although...they will also process the wood residue that you lay on the bottom of the backfill. But too many of them are also not needed, so, probably, it is still better to remove the bark.

    You can even make a fence out of branches

    From the same branches, only freshly cut, you can make a wicker fence. And it will also need to be lined from the inside with a film: to keep water and earth inside.

    Read how to make wattle here.

    Bed framing can be woven from fresh branches or laid out of stones

    Even straw can be used. It is tied into small bundles, which are interconnected with a wire. It simply cannot be cheaper, but it keeps water and temperature well. The only disadvantage of this option is that such a fence will last a maximum of two seasons, but rather one. But it can then be used as one of the layers. nine0003 Fencing of beds made of straw

    Bulk beds

    There are high beds without a fence: the so-called bulk beds. The soil in them is poured in the form of hills.

    Raised beds

    To improve drainage, branches are laid inside such a bed. To reduce the height of the bed (for example, under tomatoes), it is slightly deepened by tilting the soil to the side. After laying the branches, it is covered from above, often there is a need for additionally imported soil. If you can’t choose the row spacing deeply. nine0003 Internal arrangement of bulk beds

    The disadvantage of this kind of vegetable garden: when watering and during rains, the topsoil is washed away. Therefore, they began to make boxes - to avoid washing out the soil.

    Raised Bed Layers

    Framing is only a small part of the job. You still need to fill the received box. It must be said right away that the thickness of the layers depends on the height of the bed that you have chosen, so if any values ​​\u200b\u200bare given, then only approximately. In addition to the size of the bed, the thickness of the layer, for example, the fertile one, is influenced by the choice of plants: 5 cm is enough for someone, and much more is needed for someone. nine0003 Approximate layers for a high bed

    So, what to pour into a high bed - layers from bottom to top:

    1. A metal mesh with a small cell or a layer of geotextile is laid on the bottom. You can put cardboard. Mesh and geotextile - protection against rodents and moles. Cardboard plays about the same role, but it is less effective.
    2. Large wood residues: thick branches, branches, even chocks and bars. This layer serves, firstly, for drainage, and secondly, moisture accumulates in the wood. The more arid the climate in your area, the more wood you need. Moreover, the following wood layers too. nine0008
    3. Shredded small branches, bark. Other coarse plant residues will do: corn stalks, straw. Their mission is also twofold. They store water, and when decomposed, they release heat and nutrients. But when using corn trunks and straw, keep in mind that the bed will soon sink: these remains quickly rot, but the yield will be high, and fertile land can be sprinkled on top.
    4. Paper, thin cardboard. It is usually lined with a thin layer. They use packing cardboard more often, because glossy paper is not suitable, just like newspapers: the lead base of the paint is not at all what plants need to be fertilized with. If there is an old unnecessary burlap (natural), you can lay it. nine0008
    5. Layer of plant residues: leaves, grass, semi-decomposed sawdust. Be careful with sawdust: they strongly acidify the soil. So sprinkle them under plants that love acidic soil, or neutralize the acidity by sprinkling them with a good layer of ash.
    6. Fertile land.

    In the last two layers, you can add a good portion of matured compost, as well as sprinkle deeper layers with it. This will speed up the “readiness” of the high bed for planting.

    Read about how to make a pond in the country with your own hands here, and this article says how to turn it into a fountain. nine0003

    When is the best time to plant and what to plant

    It is better to fill the high bed in autumn. During this period, there will be enough “material” and during the winter the processes inside will gain momentum. In this case, you can plant plants in the spring and hope for a high yield. It can be done in the spring, but there are unlikely to be any significant differences in yield: the processes have just begun and will not be able to have a noticeable effect on the fertility of the backfill. Although you will definitely feel the difference in the amount of water for irrigation: much less water is required. nine0003 One of the options for a high bed: metal mesh and reinforced polyethylene film

    Plant rotation

    In the year of a high bed, plants requiring high fertility can be planted on it: cucumbers, zucchini, zucchini, pumpkin, any kind of cabbage, eggplant, tomatoes, sweet peppers . The next year, you can plant greens - spicy-aromatic and leafy. Root crops feel good in the second year.

    After the second harvest, fertility must be restored. If the contents of the bed sagged, in the fall they fill up with good earth mixed with mature compost. If there is nowhere to fill up, remove part of the top layer (on a compost heap or in another box as part of the backfill) and replace it with fresh earth with fertilizers. nine0003

    High bed for strawberries

    It differs only in that a covering material is spread over the finished “pie”. Holes are made in it, in which plants are planted. This option leads to the fact that moisture evaporates in minimal quantities, and weeds do not grow in the aisle. The second option - mulching the ground also works well, but evaporation is more intense.

    Strawberries feel good

    Strawberries are peculiar in that their roots are located mainly on the surface. Therefore, the fertile layer can be small. But this same feature leads to the fact that in severe frosts it can die. Although there is a decomposition process inside the high bed, warming up the soil, if the bed is without snow and not covered for the winter, the root system may freeze. nine0003

    High bed for cucumbers and tomatoes

    It is no different in terms of its structure. Is it only because they need poles and crossbars or stretched wire around the edges in order to be able to tie up bushes of tomatoes or lashes of cucumbers.

    For cucumbers and tomatoes, you need to take care of the garter

    You can read about the organization of automatic watering of the garden or plot here.

    Do-it-yourself high beds

    Most often, questions arise not when laying layers in high beds, but when making a box. Since women often do a lot of gardening, right up to making fences for garden beds, many points may not be clear to them. To clarify the most difficult ones, we present photo reports of making a box from boards and slate - the most common fences. nine0003

    From planks

    Several options for how to make high beds from boards were in the photo above. The main snag is usually in the connection at the corners. The easiest way is to overlap them: just put one to the other at 90 ° and knock it down with nails. But there are aesthetes who all strive to do the right thing. And that's right - cut down two boards at an angle of 45 ° and connect them like that. It is this option that will be shown in the photo.

    Planed boards treated with impregnation to slow decay

    To make it convenient to fix the fence on the ground, vertical bars or pieces of board are nailed in increments of 1. 2-1.5 m, the length of which is approximately 20 cm more than the selected bed height.

    We nail vertical bars so that the box is strong and can be dug in.

    The lower end of the bar or board needs to be sharpened - this will make it easier to drive the fence into the ground. Then we take a miter box or a circular saw, and cut off the edges at an angle of 45 °. Putting two boards together creates a perfect 90° angle.

    Correctly made corner

    For a strong connection on the inside of the corner, we install a bar, to which we nail the boards.

    That's what happened. Only he lies "burdens" up. They are hammered into the ground

    Fencing for high beds made of wood does not take long, but even easier, connect the boards end-to-end, and nail metal corners for strength (pictured below).

    The easiest option

    From logs

    It is not difficult to make a similar box from hewn logs. For example, this option: two long sides from logs, and short ones from pieces of boards. nine0003 The advantage of logs is that they are heavy, and due to their weight they will hold the soil well.

    Whitewash the finished fence: both pest protection and a more attractive look.

    Getting Started

    From Slate

    When making beds from flat or wave slate, questions also arise about how to fix it. The easiest way is to dig in. But this is uneconomical: you will have to make the stripes wider by at least 10 cm and still there is no guarantee that the slate will not “float” in the spring. In the muddy earth, it will simply be squeezed out with a mass. You can fix it, but it's too much time and effort. nine0003

    Therefore, most often corners or pipes are driven in from one or both sides of the sheet, which clamp the slate and prevent it from deviating strongly. In the photo, the corners are driven in only from the outside: from the inside, the mass of layers of the high bed will press, so that the fence will not fall inside.

    Fencing beds with slate

    The joints of two sheets are secured with a special welded plate. For reliability, they can be bolted to a wooden bar attached from the other side.

    A piece of reinforcement with a welded plate - for insuring the joint of two sheets of flat slate

    Another option is to make a frame. Attach a bar or a corner to similar racks with welded plates - for whom it is cheaper. And to this frame, attach the slate cut into strips (it holds well with nails, but it’s easier with self-tapping screws).

    Bar frame in fence for high bed

    The same principle - with guides - makes beds from plastic panels and other similar materials. As you understand, especially virtuoso skill is not needed here. The main thing is to keep well. nine0003

    types, features and rules for creating high beds

    118 records, 154 photos the best new now discussing

    I want to tell you about my experiments (or rather unnecessary gestures) with garden beds. Maybe my experience will be useful to someone and save them from unnecessary gestures. My dacha is located twenty kilometers southeast of Moscow. Climate at...

    It is no longer a secret for gardeners that raised (high) beds compare favorably with many advantages compared to classic ones. However, many mistakenly believe that their creation is not only laborious, but also costly. In this article...

    There are many ways to organize a vegetable garden that optimize garden care and minimize labor effort. One of the options is stationary high beds that can last more than one year. They are comfortable and practical, and besides...

    When I decided, let's say, to restore my abandoned plot, there was simply no question of any vegetable garden with potatoes, tomatoes, etc.! I remember how, as a child, my mother and I were constantly weeding, hilling, collecting beetles with our hands and burning them ... In...

    Good morning:) Tell me, please, how do you process wood in high / warm beds, or in other places where the tree is constantly in contact with moisture ?! Do you have any experience with Senezh?! If - yes, then please tell me which one . ..

    Good evening everyone. Tell me, please, how to process wooden high beds so that they do not rot?

    How to paint the bed boards? I made high beds from boards, soaked the boards with an antiseptic. Now I want to paint them for beauty, but I can not decide on the paint. Which one is better to paint, so that it would stand longer and at the same time would not be strong ...

    Is it possible to make such high beds so that the walls do not have to be renewed for the next 10 years? I suggest to try. But it will not just be a place for growing crops, but an art object, decoration of the site. Durable high beds with your own hands ...

    How to make a nice, durable raised bed? Every active summer resident faces such a question. The easiest way is to put it together from boards, but they darken over time, and when in contact with the ground, the tree rots. Cast concrete bed sides...

    There are many ways to make a garden not only beautiful, but also comfortable to work with. Consider how Swedish gardeners raise beds above ground level, and find out why future crops only benefit from this. As you know, far...

    I offer you another version of a mini-greenhouse. Its advantage is also that it is at the same time a high bed. The design is quite easy to perform and looks very aesthetically pleasing.

    Summer has come and things have piled up at once, or, as I call it, a plan - a task for the summer period. The wife made a request, the boards on the beds rotted. I had to put it in the first place, the old board was liquidated and sawn for firewood....

    Good afternoon, everyone. How tall should a high tomato bed be? After all, if you fill it with different layers, starting with twigs, the roots, developing, where will they go? In this drain? And then through it into the ground of the garden? There is no such information anywhere...

    Hello! Need advice. We live in the northwest, so the rains are long, and summers are not always hot. Therefore, I decided to gradually move to high stationary beds. I am preparing my husband for this decision gradually and theoretically so far....

    Hello! I want to make some raised beds in a wooden frame this spring for zucchini, dill, radishes, etc. Height 20-30 cm from ground level. Everyone writes that the scheme for filling these ridges is first leaves, branches, then manure, ...

    If you take a closer look at the dacha and rural gardens of the country, then everywhere, “from Moscow to the very outskirts”, approximately the same picture will appear: potato fields and beds, beds, beds ... Our vast territories allowed for a very long time ...

    Tell me how to make raised beds?

    How to fill high beds (in layers)? Thank you.

    I have already written about greenhouses in our area, now I want to tell you about our beds in the open field and how we manage to get an excellent harvest on them. We have 10 berry and vegetable beds. Garden Each culture is assigned strictly .

    Learn more