Home » Misc » Lights that go around mirror

Lights that go around mirror


How to DIY Vanity Mirror with LED Strip Lights

Have you always wanted a makeup mirror with lights but expensive prices have you off getting it? Do you know where you should start if you want to decorate a full-length mirror? Don’t worry. Today we will take a look at how to DIY together and transform ordinary mirrors easily and economically into super bright LED makeup mirrors. You can turn your full-length mirror into a mood setter for the entire room.

Part 1. How to DIY LED Light Strip for Vanity Mirror

Part 2. Introduce the Best LED Light Strips for Mirrors

Part 1. How to DIY LED Light Strip for Vanity Mirror

Step 1. Choose the right LED light strip

That’s right – the only difference between an ordinary mirror and your favorite makeup mirror is an LED light strip. The cost of LED strips is quite low, and a strip that costs a few dozen US dollars should be enough to meet all your needs. But how do you choose the right light strip?

First of all, you need to consider whether it is installed in a bedroom or in a humid room such as a bathroom. If you are installing it in a bathroom, you should take care to select a waterproof LED light strip. But if you are placing it on a bedroom makeup mirror, you won’t need to consider this point, so you can save some money in your budget.

Also, you should consider the function of the light strip. If you want to create a different atmosphere, you can choose RGB color light strips and pick the right colors to match your mood; if you don’t need too many colors, you can choose either bright white or warm white. They may look simple, but your selection can highlight the entire makeup mirror. If necessary, you can choose a LED light strip with dimming function, so that you can adjust the brightness according to your mood. You can have a pleasant experience when you apply makeup in front of the mirror.

In addition, the length of light strips is variable, and longer ones tend to cost more. Of course, if a light strip is too long, you can always cut it short, or you can try to wrap it around the mirror twice. In order to avoid wastage, we recommend that you measure the size of the mirror and choose the appropriate length before you purchase a strip light.

Step 2. Choose a location to install the LED light strip

You can choose to install the LED light strip in front of your mirror or behind your mirror as a background light. Of course, you can also follow the specific shape of the mirror and show different moods in different positions. Once you have chosen where to place the LED light strip, you can get ready to install it.

Step 3. Install LED strip lights around the mirror

After getting the light strip, you should clean the surface around the mirror, and apply the light strip. Generally speaking, placing the LED light strip around the mirror looks more attractive. Many LED light strips also have 3M strong glue at the back so that you can directly attach them to the mirror. When you are doing the sticking, you must ensure that there is no water on your mirror; otherwise even the 3M Super glue cannot stabilize the light strip. Next, you should take out the corresponding LED light strip connector and connect the light strip and the controller. After that, you can insert the power supply and light up the LED strip.

If you have any questions about how to install led strip lights on mirror, you can also watch the video below to find out more.

Part 2. Introduce the Best LED Light Strips for Mirrors

As a brand that has been thriving in the LED lighting industry for more than ten years, Lepro provides consumers with a variety of LED lights to meet their different needs. If you are looking for an LED light strip suitable for a makeup mirror or a full-length mirror, we recommend this Daylight White LED Strip Light, which is very popular because of its high quality and low price. The brightness of this LED light strip is quite good, and its dimming function enables you to adjust the brightness at different times, which is very practical. Furthermore, you can decide whether you need a waterproof function depending on the location and position you would like to install the light strip.

If you want a color light strip to create a different atmosphere, we recommend that you choose this RGB LED Strip Light. It is very easy to install, and you can easily bring up any color you want by using the remote control.

In addition to the 2 models recommended above, we have many other light strips with different functions under the LED strip lights category. Come and take a look which one you would like to use to decorate your makeup mirror!

How to Add Lights to a Mirror – Lumina Pro USA

There are many ways to add lights to your vanity, from light kits to LED light strips to rechargeable light bars. Mirrors with elegant lighting can give us a luxurious look, allowing makeup enthusiasts to utilize their creative juices to the best of their abilities.

Adding lights to vanity mirrors has been a popular choice for generations. It gives our face the illumination it deserves and improves our makeup practices. 

When the lighting is poor, it affects the way we see color and can impact the quality of our makeup application. However, professionally lit mirrors can be pricey, so let’s compare DIY lit mirrors with professional-grade ones.

Why Is Good Lighting Important for Makeup Application?

Photo by New Africa on Adobe Stock

Lighting can greatly impact the way humans perceive color. If a room is too dark or too bright, we will see color differently than in natural sunlight.

Natural daylight is full-spectrum, which means it contains all the colors of the rainbow, even the colors we cannot see.

The Color Rendering Index, or CRI scale, ranges from 0 to 100 and shows us how precise a light source is at displaying color when compared to natural sunlight.

The higher the CRI, the better the light source. If we choose a light that doesn’t render good color, then a lipstick or foundation we thought looked good could look harsh or uneven in natural light. 

No one wants to spend money on luxury cosmetics only to fail at application due to the wrong lighting. 

Choosing the right lighting for your makeup can make a huge difference in your appearance.

Which Light Bulb Is Best for Makeup Lighting?

Photo by Roman on Adobe Stock

When choosing to light your vanity mirror, it’s important to consider brightness, heat, color, and energy efficiency.

Incandescent and tungsten bulbs can radiate an orange glow, affecting how we see the makeup we’re applying to our skin.

LED bulbs are by far the best option for makeup application. While they were invented in 1962, they weren’t widely utilized until 2008. However, LEDs are ideal because they:

Being able to dim the light bulbs on your vanity mirror can help you see what your makeup application and color will look like in different lighting.  

In the real world, not everywhere has consistent lighting. So it’s helpful to have bulbs that are capable of being dimmed, yet have the ability to imitate natural light. 

How to Add Lights to a Mirror — A Step-By-Step Guide

Photo by Masson on Adobe Stock

There are several options to consider when adding your own lights to a vanity mirror.

These include LED light kits, LED light strips, vanity strips, sconces, and cordless battery-powered mirror lights.

Let’s go over a few ways to add lights to your vanity mirror.  

Add a Light Kit to Your Mirror

Image Source

What You’ll Need 

Image Source

Step 1. Wipe down your mirror with a clean cloth, clearing it of all dust and smudges so that your lights will adhere better.

Image Source

Step 2. Unbox and untie the string lights from your light kit.

Image Source

Step 3. Place the light bulbs around your mirror where you think you want them to go.

Image Source

Step 4. Measure the placement of each bulb, making sure they are equal distance from each other.

Image Source

Step 5. Use a tape measure or ruler to measure the distance between each light bulb and make sure they line up evenly on the opposite side of the mirror.

The distance between each bulb will depend on the length of your light kit and the size of your mirror. Placing bulbs about 7½ inches apart on each side and 9 inches apart on the top of your mirror should look good for a 24” x 30” mirror.

Image Source

Step 6. Once you’ve measured and made certain you like where the light bulbs are placed, take the adhesive off the back of each bulb and place them on your mirror’s surface.

Image Source

Step 7. Tape the wires between each light bulb to the back of the mirror by pulling them to the back and adhering them with electrical tape. This will hide those messy wires a bit more.

Image Source

Step 8. Plug in your light kit and enjoy your new mirror with lights! 

Add LED Light Strips to Your Mirror

Image Source

What You’ll Need

Image Source

Step 1. Lay down the flexible LED strips around the edges of your mirror.

Image Source

Step 2. With your fingers, run the first LED light strip tight along the side of your mirror.

Image Source

Step 3. Once you reach the corner of the mirror while tightening the LED strip, cut the end of your LED strip and place an L-shaped LED strip connector to the end of the strip by squeezing the connector shut on the LED strip.

You may have to fold the strip until you can cut it if the side of your mirror is shorter than the cut line, which is between the copper dots on the strip.

Image Source

Step 4. Connect the next side to the other end of the connector and repeat the step for each side of your mirror. 

Each L-shaped connector should be located in a corner of your mirror.

It’s important to check to see if each LED light strip works by plugging in your adapter cord to the LED lights after connecting it to each connector. 

If they don’t light up, you may have to replace or readjust the connectors.

Image Source

Step 5. Once you have each strip laid out as you want them and know they are working, then you can peel off the backing on the LED strips and stick them in place. 

Image Source

Step 6. Glue each L-shaped strip connector in place after sticking your LED strips in place. 

Do this after placing your LED strips just in case you have to readjust them.

 

Image Source

Step 7. Plug in your LED light strips and enjoy your mirror!

Add a Rechargeable Light Bar to Your Vanity Mirror

Image Source

What You’ll Need

Image Source

Step 1. Unbox the light bar.

Image by Silvastrings on Shutterstock

Step 2. Clean the surface of your mirror so your light bar will adhere easily.

 

Image Source

Step 3. Stick the light bar onto the mirror using the suction cup attached to the back of your light bar.

Some may also have an adhesive backing. If this is the case, take off the backing and firmly place the light bar onto the surface of the mirror.

 

Image Source

Step 4. Enjoy your mirror with light bars!

 

Image Source

Note: Many light bar products may not hold a charge for very long. The brightness of the light may also fade quickly with the charge. Recharging your light bar daily is recommended for better lighting.

Other Methods to DIY a Vanity Mirror with Lights

 

Photo by deagreez on Adobe Stock

There are many DIY vanity mirror options available on the web today. Choosing which is right for you depends on the tools available and your personal skill level.

While some options are relatively easy, others will be a little more labor-intensive and require more tools and supplies. 

With a little hard work, you can have a true piece of art that you created.

However, if done incorrectly, your mirror can look shabby or be unstable, so it’s important to follow directions carefully and seek assistance if needed. 

Here are some helpful videos to get some creative ideas for your DIY vanity mirror with lights:

Vanity Mirror FAQs

Here are answers to frequently asked questions about vanity lights and mirrors:

1.

How long do LED light strips last?

These light strips can last 20,000 to 50,000 hours. The LED lifespan outshines the lifespan of the incandescent bulb by thousands of hours. 

2. How do LED light strips work?

Flexible LED light strips are made up of a pliable circuit board with small LEDs mounted on it. LED is a semiconductor that emits light when current flows through it going one direction.

3. Can I replace a bulb on an LED light kit or strip?

Unlike standard bulbs that can easily be unfastened, integrated LED bulbs are built into multiple electrical circuit boards and they can’t be easily replaced. The entire integrated fixture must be replaced.

4. What does LED stand for?

The abbreviation stands for “light-emitting diodes.”

5. How much does a frameless glass mirror cost?

A frameless mirror can cost anywhere from $10 to $100 depending on the size and quality you need. You can expect to pay more for a framed mirror, which can range from about $50 to $250 or more.

Why Buy a Professional Mirror?

While professional-grade vanity mirrors can cost more than a regular mirror that you add lights to yourself, the quality and lighting will be far superior. 

When deciding what you’re looking for in a lighted mirror, it’s important to know your space, your needs, and the look you want.

Professional mirrors offer different levels of magnification, lighting, styles, and sizes. 

Lighting, as we’ve discussed, is vital to proper makeup application. Consider where your mirror will be located. Is there a window or is the room completely devoid of natural light?

Many professional mirrors offer different color temperature settings that range from cool to neutral to warm, as well as adjustable brightness, so you can test what you look like in various lighting.

Professional quality mirrors have an assortment of high-end features like built-in Bluetooth speakers and touchscreens that make it easy to change or pause your music while putting on your makeup.

A DIY vanity mirror with lights can be a lot of work to create. If it doesn’t turn out right it can look cheap, fall apart, and give you bad quality finishes and lighting.

With a professional-quality mirror, you can know what you’re getting by checking through reviews and seeing pictures of the product before making a decision to buy. Opting for a professional mirror will also save you time, planning, and energy.

Whether you decide to go the DIY route or buy a mirror, always have a clear idea of what you want.

Professional Vanity Mirrors

When deciding on a mirror to purchase it’s important to know what size you want your vanity mirror to be, your budget, the dimensions of your vanity table, and the look you want from your vanity mirror.

If you want an overstated piece, you might want to go with a larger mirror. If you want to focus on magnification and don’t want a mirror that takes up an entire wall, you might want to go with a table top mirror.

Below are a few quality professional mirrors to consider:

1. PRO Hollywood Mirror with Bluetooth Speakers

This mirror offers a durable and sturdy structure with an aluminum frame and iron back.

It has balanced illumination with wrap-around lighting and a sleek all-glass surface. 

This mirror provides touchscreen lighting options, music controls, and dual Bluetooth speakers, making it perfect for jamming out while doing your makeup. 

2. Crystal Vanity Mirror with Bluetooth Speakers 

This mirror offers luxury with an elegant, illuminated crystal border and touchscreen controls that offer three color temperature settings with different brightness levels.

You can select cool, neutral, or warm lighting depending on the occasion with a range of 3,000 Kelvins to a near natural sunlight level of 6,400 Kelvins.

3. Hollywood Table Top Makeup Mirror

While tabletop mirrors can be a cheaper option, a professional tabletop mirror doesn’t necessarily mean you get less.

This mirror has touchscreen light controls, a glamourous Hollywood look, extra magnification options, a 360-degree swivel mirror, and a sturdy iron frame.

Astigmatism - vision as in the kingdom of "crooked mirrors" / Sudo Null IT News

Friends, after a break, we resume publications about vision and technologies for its restoration. The pause was due to my workload with operations and participation in conferences: in the near future I will publish a review of the most interesting technical innovations in ophthalmology that were presented at them, and today we will talk about astigmatism.

The current statistics are depressing. More than half of the world's population suffers from visual impairment, the most common problems being nearsightedness and farsightedness. But ophthalmologists often diagnose another disease, the name of which is unfamiliar to many. Astigmatism is a defect in the optical system of the eye, when the sharpness of the image is asymmetric vertically and horizontally. And the parallel rays of light passing through the eye are focused not into a point, but into a "figure eight". For a person, this means that the visibility of the image becomes blurred, and often this applies to both distant and close objects. As a result, instead of a normal image, a person sees a distorted one, in which some lines are clear, others are blurry. You can get an idea of ​​this if you look at your distorted reflection in an oval teaspoon. A similar distorted image is formed with astigmatism on the retina. nine0003

Ophthalmologists say that almost two-thirds of the world's inhabitants face such a problem. But since the degree of astigmatism can be small, many people practically do not feel any discomfort. It is difficult for doctors to isolate a clear list of common symptoms that indicate the presence of astigmatism in a patient. In each case, they will differ. In its earliest stages, it is often confused with eye fatigue.

However, quite a few people need special treatment or correction for this disorder with glasses, contact lenses, or even surgery. nine0009

General

Astigmatism is a defect in the optical system of the eye. In this case, the refraction (or reflection) of the rays in different sections of the passing light beam is not the same.

As a result, the image of objects becomes blurred, each point of the object is displayed as a blurry ellipse. And the whole picture, as in a "distorted mirror", turns into the so-called "Sturm's conoid" figure. In practice, the main complaint is a deterioration in distance vision, often vagueness near, fuzziness and bifurcation of objects. nine0009

The path of rays in the eye with astigmatism looks like this.

— Was I born like this or has life spoiled me?

This is the first question patients ask when they hear this diagnosis for the first time.

Astigmatism may be congenital or acquired and may be stable and progressive.

Quite often, astigmatism is a structural feature of the cornea at birth, it can even be inherited from parents. If its value affects visual acuity (as a rule, we are talking about astigmatism greater than 1 diopter), then it necessarily requires correction from early childhood. Otherwise, the eye does not see well and amblyopia develops - a “lazy” eye that is no longer capable of high vision in adulthood. A child with astigmatism, by the way, will never complain to you about poor eyesight - he doesn’t know how to see it well. Therefore, early examinations by an ophthalmologist and wearing glasses, "as the doctor ordered," are so important. nine0003

It often happens that already an adult is surprised to find out that he has astigmatism, this is the case of those who were not examined in childhood.

Astigmatism can appear in adulthood as a result of corneal diseases such as keratoconus, inflammation, trauma and surgery.

In any case, he does not appear from working at the computer.

— What is damaged in astigmatism?

First of all, astigmatism can be caused by two optical systems of the eye - the cornea and the lens. When glasses or lenses are selected, the resulting optical powers of these two systems are taken into account. Please note that usually patients know about the common corneal astigmatism, but forget about the lens one - this can be important, for example, in cataracts, when an irregularity appears in the lens. “The cornea is even, but there is astigmatism” - this is it. Often the patient and the optometrist do not bother at all with what is the cause. When choosing glasses, it is important to focus the rays of light on the retina with the help of correction. And with surgical correction - this is important. nine0003

For a simplified understanding of the problem, I often explain to patients that the optics of an eye with astigmatism does not look like a sphere (soccer ball), but an oval (rugby ball).


— How does astigmatism differ in size, shape and content?

Firstly, the value of astigmatism matters - conditionally, up to 1 diopter, astigmatism is considered physiological, weak. That is, as a rule, it does not require correction. But if even such a small amount reduces vision, alas, it needs to be corrected. The average degree - up to 2 diopters, high - 2-3 diopters and more than 3 diopters - this is a very high astigmatism. There are other classifications, but this one best reflects the impact on defocus. nine0003

Second, there are two types of corneal astigmatism: regular and irregular.
With regular astigmatism, there are two main refractive sections perpendicular to the plane, within which the optical power does not change - weak and strong. There is at least some regularity in such optics, even if the axes are oblique or there is a big difference in their optical power.

Regular astigmatism - in this case, two parts can be distinguished, where the cornea has a different degree of refraction. This type of astigmatism can be corrected with cylindrical glasses or soft contact lenses. nine0003

Irregular astigmatism - in this case two parts cannot be distinguished because there are many optical axes. This type usually develops as a result of damage to the cornea, such as during an accident (scar tissue formation), or due to irregular corneal bulges (keratoconus). Irregular astigmatism is usually poorly corrected, sometimes hard contact lenses or laser treatments on the cornea can be useful.

Thirdly, the type of astigmatism depends on the location of the strong axis. If the strong axis is vertical or deviates no more than 30 degrees from the vertical, the astigmatism is straight. If the strong axis is horizontal ±30 degrees, the astigmatism is reversed. If in the interval between - astigmatism with oblique axes. Direct astigmatism slightly increases the depth of focus, reverse astigmatism worsens visibility more, but both of these options are corrected well. But the correction of astigmatism with oblique axes of glasses and lenses is worse. nine0003

Astigmatic eyes have two sections perpendicular to the plane with the highest and lowest refractive power.

Fourth, depending on how the focus is related to the retina, astigmatism is divided into myopic (myopic), farsighted (hypermetropic) and mixed - this is when in one eye part of the image falls in front of the retina, and part behind the retina. For example, minus two and minus four - then this is complex myopic astigmatism, plus two and plus four - complex farsighted astigmatism, plus two and minus four - mixed. nine0003

Near-sighted astigmatism is indicated by the sign "-", far-sighted - by the sign "+", with mixed in the eye there are "+" and "-".

- How can I suspect astigmatism?

Symptoms of astigmatism are a decrease in vision, sometimes the vision of objects is curved, their bifurcation, rapid eye fatigue during work, and headache. Often you may not even suspect that there is such a problem, complaints are so typical - poor vision for distance or near, or at all distances. nine0003

- What diagnosis is needed for astigmatism.

Since astigmatism is a defect in optics, then, firstly, the optics of the eye is carefully examined. And only an ophthalmologist will give the correct conclusion. To do this, we have a number of tests: a study on an autorefractometer, an aberrometer, a phoropter with the selection of trial lenses to determine visual acuity with maximum correction. A very interesting radiant figure gives an idea of ​​how astigmatism is present - if you look at the center of the figure from below, then some of the lines will be clearer, and some will “blur” for those who have astigmatism. nine0003

In phoropter tests, the ophthalmologist also has a number of techniques in his arsenal to clarify the presence of astigmatism, its axis and magnitude. And this process is always quite time consuming - this can be confirmed by those patients who have done with us, for example, SMILE. Verification of tests with "fogging, cross-cylinders with force and axial samples" in time 20-30 minutes.

So, when it was determined that there is still astigmatism, it is necessary to determine "who is to blame" - the cornea or the lens.

Examination of the cornea should include keratotopography - study of the relief and optical power of the cornea over its entire area, optical coherence tomography, which determines the thickness, morphology and geometry of the cornea also over the entire area, examination of the posterior surface of the cornea using a Scheimflug camera to determine the irregularities of the anterior and posterior surfaces cornea, confocal microscopy - examination of the posterior layer of the cornea (endothelium). Based on the results of this examination, we can already conclude how healthy the cornea is. nine0003

This is how the examination on the diagnostic system Scheimflug camera + Placido rings looks like.

Sometimes astigmatism is associated with the lens - its shape, the presence of various opacities in it or a change in its position in space, such astigmatism is called lens astigmatism. And it happens that the cornea is wrong and the lens is distorted, then the resulting one will affect the final optics as a whole.

We can also study the anterior segment of the eye by performing ultrasonic biomicroscopy in order to examine and measure the parts of the eye that are inaccessible to other methods. nine0003

How it happens, I described in detail in the previous post: We got to the side effects of laser vision correction - and even before the diagnosis (post) and also here: “Augmentation” of the eye: what we build into it today, and what else will there be room for (post). Calculation of intraocular phakic lenses (embedded in the eye) - we continue about the eye and its biomechanics (post).

Yes, by the way, for children there is such a pediatric autorefractometer, which can measure the optics of a child’s eye, non-contact, when you don’t need to press anything to his forehead and everything happens at a distance of 1. 5-2 m. This is important, since children in general they are capricious and look badly (or refuse to look at all) where the ophthalmologist asks. There are far from all clinics, as it is expensive. Of course, we have it, it's called PlusOptix. And late diagnosed astigmatism leads to serious consequences. nine0003

This examination with PlusOptix

A, has not yet named the old antediluvian method of skiascopy - tracking the movement of the shadow of the reflex from the fundus of the eye when glowing with a reverse ophthalmoscope and moving the ruler with lenses. This is how our grandmothers diagnosed, by the way, quite successfully, if you know how to do it.

Skiascopy method.

– How is astigmatism related to keratoconus

One of the main symptoms that appears with keratoconus is just astigmatism. When we diagnose a patient with astigmatism, we must always exclude latent (forme fruste) or initial form of keratoconus. I wrote about this serious disease in a post:

→ Keratoectasia (keratoconus, “bulging cornea”): what it is and what to do about it however, there are already changes in the cornea and are available only with special examination methods. Therefore, if you are offered to examine the cornea for its health, this is not a commercial “cheat”, it is worth doing, since treatment in the initial stages is much more effective than in developed and advanced ones. nine0003

With keratoconus, we are talking about irregular astigmatism, which is difficult to correct in advanced stages.

This is how a keratotopogram looks like with initial keratoconus.

And in the next post I will talk about the ways to correct astigmatism, both surgical and non-surgical, and also about what is most important for astigmatism in childhood and adulthood.

GO TO ASTIGMATISM CORRECTION METHODS >>>

Tricks developers use in their games — Gamedev on DTF

A subtle cheat that enhances the gaming experience.

12450 views

Reddit user Ghost_Mech posted a post in which he asked the developers what tricks they used in their games. In the comments, users told not only about their own solutions, but also about tricks from other games. We have selected the most interesting examples from the discussion.

User King-Of-Throwaways reported that in his games, when choosing a line in a dialogue, he disables the ability to press the button for about 0.3 seconds. This is necessary so that players who skip character lines do not make a rash choice. nine0003

In some cases, you can use the ability to repeat the dialogue

In response to this, user matty_spatty remembered that in Paradox Interactive strategies, when pop-ups appear, the ability to enter is also disabled for a short moment. This is necessary so that the player does not accidentally make an important decision during a random event.

The developer of Voidship: The Long Journey, Kosh_Ascadian, has revealed how, while testing the game, he found that his favorite missions were the ones he beat with his last breath. He wanted this situation to repeat as often as possible, but the problem was the cumulative effect - if the ship is in a deplorable state by the end of the mission, then without resources it will not be possible to repair it for the next task. nine0003

To avoid such difficulties, the developer added several mechanics. Each exploded ship module can be taken with you - it provides resources for subsequent repairs. The amount of resources depends on the value of the module. For example, if it cost 2000 credits, then its remains will bring 40% of the original cost. This is where the trick begins: the more exploded modules the ship has, the more resources you can get.

This means that the next module will bring 50% of the cost. If the ship has 17 of 20 modules blown up, the latter return 100% of the cost. In the heat of battle, this pattern is difficult to see, but it is precisely this pattern that allows you to maintain a high emotional intensity during battles and makes it possible to continue the game. nine0003

Voidship: The Long Journey

User HolyCrapf recalled that in the Halo series, grenades increase in size if the player moves away from them. This helps you see them better from a distance.

Peachleaf Pirates developer Dogkiss said that while playing the theme song, the speed of the hero increases slightly, it is harder to kill him, and the chances of dropping great loot increase. According to the developer, he sought to make the players associate the melody with victory. nine0003

Same melody

Also in Peachleaf Pirates there is a mini-game on the slot machine, which increases the probability of winning depending on how many times in a row there was a loss. Even the most energetic and "fun" songs are played every morning, as soon as the player leaves the house - this encourages you to continue passing throughout the game day.

Peachleaf Pirates

Codesprungmonkey noted that large AAA games have variable levels of detail (LODs) in absolutely every aspect. And this applies not only to graphics, but also to artificial intelligence, physics, and game logic. Anything outside of the player's influence is almost entirely an illusion. nine0003

User Madlollipop noted that hitboxes often look very different from game objects. Often developers change their size to make the gaming experience more enjoyable. For more details, you can read our text.

Developer starzwillsucceed revealed that in his open world game, he increased the speed of the character in the region in which the player defeated the boss. This helped users to overcome the explored territory faster.

User SnooDoubts826 noted that it is not the character that moves in runners, but the world around him. In fact, this technique applies to other games as well. For example, in Hades, the "Death Barge" in Asphodel does not move - other objects in the environment move instead.

User KarmaAdjuster said that in one of the studios in which he used to work, they came up with an interesting way to deal with cheaters. Despite the fact that it was a single player game, it had a leaderboard, so the problem with cheating was relevant. To solve it, the developers stopped taking into account the results of dishonest players. At the same time, the cheaters themselves did not know about this - if they were openly banned, most likely they would return with even more sophisticated cheats. nine0003

And in League of Legends, bots are put up to fight each other - this is a more effective solution to the problem than a ban.

Users also remembered that in BioShock Infinite, opponents always miss their first shot. It turns out that at the very beginning of the firefight, the enemies warn the user about the upcoming battle - this allows him to quickly assess the context of the situation and make the right decision.

User Bekwnn said that the developers at Valve guided the players in the swamps from Left 4 Dead 2 using the flow of water. According to the developers, playtesters made 17% fewer wrong turns as they progressed through the level.

Learn more