How much do entry doors cost
2022 Cost to Install Exterior or Front Doors
Typical Range:
$514 - $1,796
Cost data is based on actual project costs as reported by 7,006 HomeAdvisor members. Embed this data
How We Get This Data
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
- Homeowners use HomeAdvisor to find pros for home projects.
- When their projects are done, they fill out a short cost survey.
- We compile the data and report costs back to you.
Updated July 7, 2022
Reviewed by Robert Tschudi, Expert Home Building and Remodeling Contributor.
Written by HomeAdvisor.
The average cost to install an exterior door is around $1,155 for materials and labor. Material costs can range from $50 for a screen door to $6,000+ for sliding glass, folding glass, or telescoping doors. Labor costs range from $75 to over $1,200 per door, with the average cost around $550 to $640 per door.
In this article
- Exterior Door Cost Calculator
- Exterior Door Prices
- Cost to Install Exterior Doors
- DIY vs. Hiring Door Installers
- FAQs
Exterior Door Cost Calculator
Let's calculate cost data for you.
Where are you located?
Where are you located?
ZIP Code
| National Average | $1,155 |
| Typical Range | $514 - $1,796 |
| Low End - High End | $200 - $4,500 |
Cost data is based on actual project costs as reported by 7,006 HomeAdvisor members.
Exterior Door Prices
Exterior doors cost an average of $1,100 each, but the prices range widely based on the type of door, material, frame material, and any additional features, like sidelights or smart locks.
Door Type
Exterior door costs range from $50 to over $16,000, depending on the style. Smaller, lightweight doors, like screen doors, storm doors, or single doors, fall on the lower end of this range.
More complex doors, like accordion doors or multi-slide doors, are more expensive.
| Type | Material | Labor | Total Project Price |
|---|---|---|---|
| Single | $150 – $3,000 | $80 – $630 | $230 – $3,630 |
| Double | $750 – $5,000 | $500 – $1,000 | $1,250 – $6,000 |
| Screen | $50 – $450 | $75 – $150 | $125 – $600 |
| Storm | $100 – $550 | $75 – $150 | $175 – $700 |
| Fire-Rated Steel | $100 – $500 | $300 – $800 | $400 – $1,300 |
| Patio | $300 – $4,000 | $200 – $500 | $500 – $4,500 |
| Sliding Glass | $400 – $4,500 | $200 – $500 | $600 – $5,000 |
| French | $400 – $4,800 | $500 – $1,000 | $900 – $5,800 |
| Accordion or Folding Glass* | $4,000 – $12,000+ | $600 – $1,800 | $4,600 – $13,800+ |
| Multi-Slide or Telescoping* | $6,000 – $16,000+ | $600 – $1,800 | $6,600 – $17,800+ |
*per linear foot for a 6 to 12-foot opening.
Materials
Door materials range from around $50 to $6,000 or more, depending on the type of door. Some of the most popular materials include wood, steel, fiberglass, iron, vinyl, or composite, ranging from $150 to $6,000 or more.
| Door Slab Material | Cost |
|---|---|
| Wood | $150 – $5,000 |
| Steel | $150 – $4,000 |
| Fiberglass | $150 – $4,000 |
| Composite | $200 – $4,000 |
| Vinyl | $300 – $2,000 |
| Iron | $1,500 – $6,000+ |
Frame Material
Pre-hung doors include the frame, but you can also purchase most door frames separately for around $115 to $400 each, or about $7 to $20 per linear foot. Costs vary based on the frame material. Security steel frames or specialty frames may cost $850 to $1,500.
| Door Frame Material | Cost |
|---|---|
| Composite | $115 – $200 |
| Wood | $115 – $325 |
| Metal | $150 – $850 |
Add-Ons
There’s a wide variety of features to consider adding to your exterior doors, and the costs vary from $15 for simple hardware to over $2,500 for sidelights surrounding the door.
Hardware: Hinges, doorknobs, and other hardware cost about $15 to $640 per door.
Smart locks: Smart locks cost $150 to $400, not including installation. These locks are convenient and can add more security to your home.
Sidelights: Sidelights, which are slim, matching windows installed next to the front door, add $500 to $2,500 to a standard install. Custom work can push the price higher.
Find a Door Installation Pro Near You
ZIP Code
Find a ProCost to Install Exterior Doors
Exterior doors are often larger and heavier than interior doors, making them more challenging to install. Installation costs can vary, depending on the number of installed doors, their type(s), and whether or not you need additional framing, structural support, or weatherproofing.
Number of Doors
Expect to spend about $550 to $640 in labor costs for each exterior door.
The more exterior entrances you have, the higher the total cost.
Type of Door
Depending on the type of door, labor costs for exterior door installation can range from about $75 for a lightweight screen door to over $1,200 for a 12-foot-wide, multi-panel folding glass door.
Double: Because of the size, labor tends to be slightly higher at $500 to $1,000per installation.
Screen: Average screen door costs range between $100 and $1,550, which tend to be lightweight and easier to install. Factor in around $75 to $150 for labor.
Storm: Storm doors cost $200 to $600 in labor and provide added protection against rain and wind.
Fire-rated: A fire-rated door costs $400 to $1,300 to install. These doors are typically used in commercial buildings and require specialized hardware.
Patio: Patio doors range from $500 to $1,000 in installation costs, depending on the size and style.
Sliding glass: Sliding glass doors cost about $70 to $100 per hour or $300 to $800 total.
French: French doors add $200 to $1,000 in labor costs. This type of door includes a full-view or top to bottom window and offers an elegant look.
Multi-panel and multi-slide: These are the most expensive exterior doors to install at $100 to $150 per linear foot, or around $1,200 to $1,800 for a 12-foot door.
Labor
Labor rates run anywhere from $40 to $90 per hour, with an average of about $70 per hour. It only takes two to three hours for a pre-hung door installation versus six to seven hours for a door with a frame.
Pre-hung
Installing a pre-hung door costs about $140 to $210 for the labor, plus the cost of materials. A pre-hung door is sold with the door already attached to the frame, making installation easier.
Structural Integrity
You may need to work with a structural engineer, which will cost about $500 total, in order to cut through supporting walls and install new headers.
It's best to hire a structural engineer for $100 to $150 per hour to make sure this work is done safely and will hold up over time. Most municipalities also require a permit for this type of work, and permits cost an average of $435 to $2,300.
Framing
Framing costs $7 to $16 per square foot. Expect the higher end of that range when installing a load-bearing header.
Waterproof and Sealing
The door itself needs proper sealing for an additional $80 to $200. Exterior varieties require proper flashing, house wrap, and waterproofing membranes to keep moisture out. This is usually part of the rough framework.
DIY vs. Hiring Door Installers
You could save about $70 an hour on installation costs by installing an exterior door yourself, but you’ll still need at least one other set of hands to help hold the door, especially if you work with a heavier material.
However, hiring a local door installer is the best way to go, as the pros can get the job done quicker and make sure the door fits and secures properly.
If you want to save on labor costs, opt for a pre-hung door, which can reduce the price of installation by 30% to 50%.
FAQs
How much is a walkout basement door?
Installing a walkout basement door runs from $2,500 to $10,000 or more depending on a few factors:
Digging and cutting: For walkouts, the exterior needs to be level with the bottom of the basement. Plus, you'll need to have the concrete wall cut to the appropriate size.
Framing: Framing costs $350 to $800, including a header. Most municipalities require a permit for this type of work.
Materials and labor: Most walkout basement doors feature a double patio style door for $500 to $4,500, including labor.
Patio installation: You may want to install a patio outside of the door. IN most cases, patio installation costs $1,900 to $5,500.
What is the best exterior door for direct sunlight?
Fiberglass doors are best for exterior doors in direct sunlight and can last up to 20 years.
Wood is more likely to warp or crack when exposed to sunlight over time, and metal doors can get too hot to touch with long sunlight exposure. For doors with glass panels, choose glass with a low-E or other UV-blocking coatings to prevent the sunlight from fading furniture, carpets, or rugs inside the door.
What does it cost to close up an exterior door?
New wall installation costs an average of $1,900, though expect to add $600 for siding and painting. To close up an exterior door, you'll need to frame in a wall, insulate, and install siding and drywall.
Still Have Questions About Installing a New Door?
ZIP Code
Ask a ProRelated Projects Costs
- Install a Door
- Install a Garage Door
- Install a Glass Shower Door
- How Much Does It Cost To Install A Storm Door?
- Install an Interior Door
- Repair a Door
- Repair a Garage Door
- Repair a Glass Shower Door
- Install a Sliding Glass Door
- Install a Garage Door Opener
Popular Categories
- Additions & Remodels
- Bathrooms
- Heating & Cooling
- Kitchens
- Landscape
- All Categories
Popular Projects
- Hire a Handyman
- Hire a Maid Service
- Install Landscaping
- Remodel a Bathroom
- Remodel a Kitchen
Featured Articles
- How Much Does it Cost to Install or Replace Kitchen Cabinets?
- How Much Does a Home Addition Cost?
- Install Countertops
- How Much Does it Cost to Install a Window?
- How Much Does It Cost to Clean Gutters?
Find Exterior Door Installers Near You
- Houston, TX
- Miami, FL
- Philadelphia, PA
- Chicago, IL
- Fort Lauderdale, FL
- San Antonio, TX
- Denver, CO
- Phoenix, AZ
- Baltimore, MD
- Minneapolis, MN
- Las Vegas, NV
- Jacksonville, FL
- San Diego, CA
- Austin, TX
- Dallas, TX
- Charlotte, NC
- Tampa, FL
- Fort Worth, TX
- Los Angeles, CA
- Atlanta, GA
- Orlando, FL
- Columbus, OH
- Indianapolis, IN
- Saint Louis, MO
- Saint Paul, MN
- Sacramento, CA
- Saint Petersburg, FL
- Pittsburgh, PA
- Seattle, WA
- Washington, DC
- Cincinnati, OH
- San Jose, CA
- Kansas City, MO
- Cleveland, OH
- Milwaukee, WI
- Portland, OR
- Detroit, MI
- Tucson, AZ
- Marietta, GA
- West Palm Beach, FL
Don't see your city?
How Much Do Door Installations Cost?
Behind every door is a world of possibility—and a price tag.
Door installation costs $1,049 on average, but can range between $473 and $1,642 depending on the type of door you choose, its material, its framing, and more. door type. Keeping a handle on your door installation budget takes a bit of know-how, since costs can easily rise if you splurge on customizations and high-end finishes like smart locks and glasswork. So, how much does a door cost? Read on to unlock all the details you need to know.
Door Installation Cost Factors
It’s no secret; doors provide safety, security, and style for a home. But many different elements will influence the cost of your door installation, so check out these helpful notes to help keep your budget in check.
Interior vs. Exterior Doors
A no-frills interior door costs as little as $40, but choosing a solid wood interior door with special features or design details can drive the price up to as much as $500. With installation, you’re looking at a typical cost of $375 to $1,125.
Exterior doors have a bigger role to play in your home, from providing security to withstanding whatever Mother Nature may bring. They generally cost a little more to install. All-in, you can expect exterior door installation costs to total $525 to $1,700 and up. It can even exceed $10,000 if your door is a high-end, custom creation requiring special expertise at installation.
If your renovation plans require a new location for your door, prepare to spend more on modifications. Contractors will likely be able to tackle drywall and electrical changes, but it will add an average of $75 more per hour in labor charges.
Jamb, Hinges, Knobs, and Locks
When you buy a pre-hung door, it will include some of the hardware you need, but you’ll probably have to purchase knobs and locks. Slab doors will also need jambs and hinges. Take a look at the pricing for each:
Jambs: $150–$250; including labor and materials
Hinges: $2.
50–$30; you’ll need two or three, depending on your door Knobs and locks: $10–$300; these come in handy sets
You may also want to consider installing a doorway transition strip to minimize noise between interior rooms.
Solid Core vs. Hollow Core Doors
Not to be confused with a solid wood door, solid core doors are altogether different. They have an interior filled with wood particles and foam. A hollow core door, on the other hand, has a slat system inside that looks kind of like a honeycomb.
If you’re looking to save money, a hollow core door (perfect for a linen or craft closet) is a solid choice, even if it’s not quite as durable as a solid core door. Hollow core doors are most often used for interiors. Both solid and hollow core doors cost about $100 to $300 per installation, but the hollow core option will likely be a bit easier on your wallet.
Custom Doors
Think of a custom door like a piece of jewelry for your home, and a gateway to your style.
But as with anything personalized, it comes with a higher price tag. Custom door installations range from $500 to $10,000 or more if you add sidelights, transoms, or security systems. If all you need is a basic install, doors cost between $200 to $1,800, and your pro probably needs about three hours to do the job.
Door Style
Doors go well beyond your standard single door. There are actually a lot of styles—but that impacts the overall price of the job. Some styles (like French doors, sliding doors, and bifold doors) are a little more costly because they come with more complicated installations and higher material costs. By upgrading your door, a small $200 job can quickly turn into a job that costs thousands.
Door Material
High-end, specialty materials will always cost more than basic materials. For example, a hollow-core door made from composite wood costs as little as $40. This is commonly used on interior doors, but if you want to upgrade to a solid wood model, you’ll spend around $200 on the low end.
On the opposite end of the spectrum, an intricate wrought iron exterior door can cost as much as $7,000.
Wall Materials
If you’re installing a door in a brand new location or changing the size of an existing door, you’ll have to pay additional costs for working on the wall. This could include everything from drywall work to masonry, electrical, or even plumbing. Expect it to add significant costs, since you may even have to hire additional contractors. For a professional job, here’s what to expect:
Drywall installation costs: $50–$100 per hour
Repairing a brick wall costs: $20–$40 per square foot
Electrical work costs: $50–$100 per hour
Plumbing costs: $45–$200 per hour
Labor Costs
Your total labor fees will depend on two things: the work required and how long the job takes. Average labor costs for a local door installation contractor will run you between $40 and $90 per hour.
If you choose an experienced handyperson, the fees are typically less, about $30 to $40 per hour.
Door Frame and Jam Costs
The cost for a front door replacement (or any other type of door replacement, for that matter) depends on if there’s an existing, correctly-sized jamb and frame. Are you swapping out a same-sized door in an existing frame, installing new parts, or something in between?
How Much Will I Pay to Install or Replace a New Frame and Jamb?
What’s the difference between a door frame and a jamb? That’s easy. A door jamb is part of the door frame: it’s the flat surface that runs vertically up either side. If you need to replace a door frame or jamb, that’ll set you back about $250 plus possible disposal fees.
Now, if your existing door frame has rot or damage, you’ll likely need a new one. A “rough frame” (that’s what pros call the overall frame that allows space for the door itself) has a wide range of costs. Expect to pay between $200 to $650, depending on details like whether the door will be load-bearing or if it’ll need electrical wiring rerouted.
How Much Will I Pay to Replace a Door in an Existing Jamb or Frame?
If you’re replacing an interior door for a new one that’s the same size, the price ranges between $40 and $500 without labor costs. Exterior doors jump in price from $150 to $6,000 or more without labor, depending on the door’s materials and its extra features or accessories.
What Will I Pay to Fit a New Door System Into an Old Opening?
Nothing says “instant upgrade” like a new exterior door, but this is one case where you may need to change the whole door system. That can mean adjusting your existing space or opening to fit your new door and make your entryway shine. For this type of installation, you can expect to pay an average of $900, but it’s worth it if you’re hoping to maximize your return on investment.
For any door project, you’ll need to change an existing opening if it needs expansion or reshaping to accommodate the new door. Many older homes, for example, don’t meet today's doorway standards, so they may need some finessing to be able to welcome a modern door system.
And remember, exterior doors often have extra features. You’ll pay more if you decide to add side windows, transoms, or a portico.
Cost of Doors By Style
The style of door is perhaps one of the largest factors that will determine your overall door installation costs. Standard single doors and interior doors are budget-friendly, but you’ll splurge on specialty exterior doors. Here’s what you can expect to pay, including labor and materials.
| Door Style | Cost Range |
|---|---|
| Standard Single Door | $200 – $1,800 |
| Double Doors | $750 – $5,000 |
| French Doors | $600 – $5,800 |
| Sliding Doors | $500 – $4,500 |
| Bifold Doors | $150 – $13,800+ |
| Fire-Rated Doors | $400 – $1,300 |
| Bulkhead Cellar Doors | $1,000 – $6,000 |
Standard Single Door
Installing a door costs $200 to $1,800 if it’s a basic door with a basic installation.
Though a standard single door is nothing snazzy, it gets the job done.
Double Doors
Double doors cost between $750 and $5,000 to install, though they can cost more depending on the design. In particular, costs can soar if you want to install exterior double doors in a load-bearing wall. That project is notably labor-intensive.
French Doors
French doors have several smaller glass panes that act as a full-view window. Expect to spend anywhere between $600 and $5,800 to install this type of door into an existing frame. You’ll often find French doors installed as double doors, especially in historic homes, but you can install a single French door, which would cost less.
Sliding Doors
Installing a sliding door costs anywhere from $500 to $4,500. On average, most homeowners spend $2,150, but it depends on the type of sliding door. A basic model can cost as little as $300 before installation, but you’ll spend more on specialty models including soundproof doors, double pane glass doors, hurricane impact doors, and automatic sliding doors.
Bifold Doors
Bifold doors, also known as accordion doors or folding doors, have a huge range of prices depending on the purpose. To install the kind of accordion door you’d use on an interior closet, expect to spend anywhere from $150 to $500 (or as little as $50 if you install the door yourself).
Exterior bifold doors cost significantly more to install. Expect to spend $4,000 to $12,000 or more on the type of folding glass doors you’d use on a patio entrance, and an additional $600 to $1,800 on labor.
Fire-Rated Doors
Fire-rated doors typically cost $400 to $1,300 to install. These doors generally have 45 minutes to 3 hours of fire resistance. The better rated, the more it’s going to cost. Keep in mind, this type of door may actually be a building code requirement, so leave some room in your budget if necessary.
Bulkhead Cellar Doors
Bulkhead doors are often used as storm doors to cellars and basements.
The door alone tends to cost $600 to $1,200, and most homeowners spend anywhere from $1,100 to $6,000 all-in. Even though installation can significantly raise costs, it’s typically money well-spent. Bulkhead door installation requires precision to avoid leaks and other issues that could lead to a flooded basement and thousands of dollars worth of water damage. In this case, it’s best to go with the pros.
Cost of Door Materials
| Door Material | Price Range |
|---|---|
| Composite wood | $40 – $500 |
| Steel | $100 – $1,000 |
| Aluminum | $100 – $2,000 |
| Fiberglass | $150 – $5,000 |
| Wood | $200 – $5,000 |
| Wrought iron | $1,500 – $7,000 |
Composite Wood Doors
Composite and engineered doors offer the look of wood without the hefty price tag, which makes them very popular, especially for interior doors.
They cost between $40 and $500 on average and are the humble, reliable workhorses in the world of doors.
Steel Doors
You might choose steel doors for their durability and affordability. They cost anywhere from $100 to $1,000 (or between $500 to $1,230 including installation). Steel resists weather well, but will need attention if rust should form. Pro tip: If you want to add sleek style to your steel door, consider glass accents (though this will likely increase the price by $300 to $1,200).
Aluminum Doors
If you live in a home that lacks natural light, such as a bungalow, choose an aluminum door and soak up that Vitamin D. Another asset? Aluminum-framed doors are strong. In fact, if you like, they’re strong enough to add in large windows without adding the extra bulk of a thick frame.
This type of door costs $100 to $2,000, depending on whether you’re installing an interior or exterior door.
Fiberglass Doors
If you’re interested in saving money on monthly energy bills, an efficient fiberglass door may be a fantastic fit.
Fiberglass doors expand and contract with the seasons and temperature to keep your climate-controlled air on the inside, just where you want it.
But just because they’re practical, it doesn’t mean you have to skimp on style. You can find smooth or wood grain textured options to add a bit of flair. Most fiberglass door installations cost between $250 and $2,000.
Wooden Doors
Wooden doors remain popular year after year because, well, they’re classic. They come in a wide variety of styles and rock that timeless look. Low-cost interior wood doors start at $200, while you might pay up to $5,000 for high-end exterior doors.
Wrought Iron Doors
Wrought-iron doors, with their imposing elegance or intricate designs, are the home style stars of social media, and for a good reason. They can add a ton of character to the entrance of your home.
Most wrought iron doors are made of a steel base and are then customized with wrought iron, glass, or wood details.
Wrought iron doors start at $1,500, but can run you up to $7,000 depending on size and personalization.
How Much Does It Cost to Install a Door Yourself?
A simple swap of an old door for a new one is the perfect job for a DIYer because you’re only changing the door, not the frame or jamb. You likely have all the tools needed already in your tool box, and you’ll only have to spend on the door and installation materials (like hinges, knobs, and jambs). This could cost less than $100 if you choose a budget-friendly door—just make sure it’s the right size for the frame to avoid sticking or letting air and moisture in or out.
Unfortunately, door installation isn’t always the best DIY. If your desired door doesn’t fit into the existing door frame, you’ll need to start cutting into the wall. At minimum, you’ll probably have to do some drywall installation, but it gets even more complicated when you’re installing an exterior door—especially if it’s in a load-bearing wall.
In most cases, you’ll need a permit, so it’s best to hire a local door installer.
Cost to Install Yourself vs. Hiring a Contractor
When you hire a contractor, expect to spend $40 to $90 per hour on labor. Depending on the type of door, labor can account for more than half the cost of the job. Either way, a job well done is often a job that saves cash. If you go with a qualified pro, you won’t have to invest in fixing costly mistakes.
Tips to Save Money On Door Installation Costs
If you’re working on a budget, there are some ways you can reduce the cost of your door installation. While you want a quality door and quality work, there are some places you can skimp.
Do Multiple Projects at Once
Some contractors will cut you a deal if you’re installing multiple doors. Unless you have to replace a door immediately for safety reasons or because it’s completely deteriorated, wait to tackle this project until you can upgrade a few doors at once or lump it in with another home project.
Choose a Budget-Friendly Door
It’s important to choose a door that can withstand continuous use over the years, but there are budget-friendly options that don’t sacrifice quality. Instead of opting for an intricate door with custom details, go for a basic door made out of the same material.
Hire a Handyperson for Simpler Installations
You don’t always need to hire a licensed contractor for a door replacement. If you’re replacing an interior door and it’s a simple installation, you can typically hire a local handyperson. The average handyperson charges between $30 to $40 per hour, whereas a licensed contractor can cost twice as much.
Entrance doors to the apartment | Steel doors Guardian®
Entrance doors to the apartment | Guardian® Steel DoorsKaliningrad region — Kaliningrad
Are you in Kaliningrad?
Change city
Information about prices for steel doors, service and additional services depends on the chosen city.
Catalog
Steel doors
Promotions and discounts
Interior gallery
Dealer contacts
Entrance Steel Door Models
Entrance doors to an apartment for safe and comfortable living in an apartment building
Entrance metal doors to the apartment are an attribute of the security of each dwelling. The steel structure of the door reliably protects against breaking and entering. And although the iron door brings with it a sense of security, today it is much more than just a door.
When choosing a door to an apartment, you are most likely looking for a solution to several problems. We highlight the main criteria, guided by which, you can greatly facilitate the choice of the front door:
In the first place among the protective properties for the front door to the apartment is always safety, and you should not save here. The selection of equipment is carried out taking into account the protective properties of the door leaf, door frame, locks and locking mechanisms.
The level of security of the entrance steel door is characterized by the strength and burglary-resistant properties of the door structure and locking mechanisms. The more technologically advanced the design, the higher the level of protection against intellectual and forceful hacking. But protection against breaking and opening the choice of the front door is not limited. The entrance steel door to the apartment is a comprehensive solution that can satisfy a wide range of customer needs.
In second place among the most popular protective properties of the door to the apartment is soundproofing. Soundproofing the front door is, first of all, protection from sound noise. The "comfortable" indicator for soundproof entrance doors to the apartment should be at least 32 dB (outside, you can clearly hear - a conversation; inside you can barely hear - a whisper of a person). Doors that perfectly protect against sound noise have a sound insulation index of at least 40 dB (outside it is noisy - a hum; inside it is barely audible - a whisper of a person), they can be safely attributed to premium class doors in terms of soundproofing properties.
And in third place in terms of the importance of the protective properties of the front door to the apartment is thermal insulation. Thermal insulation is always important, but, more often, where entrances for some reason do not have heating, it is most in demand. Along with the thermal insulation of the front door, tightness plays an important role. The combined work of the listed protective properties of the door provides reliable protection against cold, noise and the penetration of unpleasant odors.
The front door to an apartment with a beautiful appearance is the status of the owner of the home. Door design can be simple and concise, stylish and practical, respectable and elegant. Customize your front door with a wide range of Guardian finishes for exterior and interior. The color of the door leaf and the door frame, decorative trim on the outside and inside in various colors, fittings and its color, the design style of the door - all this you can vary according to your own desire, based on your preferences and taste.
The ease of use of Guardian doors has several levels of comfort and depends not only on the set of "comfortable" options, but also on the specific model. The price of an entrance metal door to an apartment with installation depends on many factors. So you can, without limiting yourself, go from choosing a standard door configuration to choosing an entrance door with "smart locks" or choose a premium class door model, which, along with biometric electromechanical locks, uses a video intercom and interactive illumination. Having determined the desired level of comfort for yourself, you can choose the Guardian door model and equipment with the preferred level of convenience and functionality.
Reliable and functional entry-level security door
Buy at a discount
28 500
Model overview Package and prices
Best offer
Reliable and functional entrance metal door at an affordable price
Buy at a discount
32 600
Model overview Options and prices
Bestseller
Maximum comfort with premium heat and sound insulation system for reliable protection against cold and noise
Buy at a discount
41 200
Model overview Options and prices
"Second" internal metal entrance door to preserve the appearance of the main entrance
Buy at a discount
46 000
Model overview Package and prices
New
Entrance metal door with an emphasis on beauty and comfort for modern urban apartments
Buy at a discount
50 200
Model overview Options and prices
Reinforced front metal door with premium heat and sound insulation system for reliable protection against cold and noise
Buy at a discount
53 600
Model overview Package and prices
New
Entrance metal door, based on a new look at comfort and aesthetics, along with the traditionally high level of reliability and security
Buy at a discount
63 500
Model overview Options and prices
The most necessary protection and comfort for apartments with increased security requirements
Buy at a discount
72 500
Model overview Package and prices
New
Smart entrance metal door with electronic locks for the safety and comfort of your home
Buy at a discount
180 400
Model overview Package and prices
You may be interested in:
- 901
Entrance doors to the apartment with thermal insulation from the Guardian factory
-
Entrance metal doors with noise insulation from the Guardian factory
-
Entrance steel doors to the apartment with sound insulation from the Guardian factory
-
Tambour double-leaf entrance metal doors from the Guardian factory
-
Thick entrance metal doors from the steel door factory Guardian
-
Insulated entrance metal doors from the Guardian factory
DS 9 Guardian® Steel Door - Model Overview
DS 9 Guardian® Steel Door - Model OverviewKaliningrad region — Kaliningrad
Are you in Kaliningrad?
Change city
Information about prices for steel doors, service and additional services depends on the chosen city.
Catalog
Steel doors
Promotions and discounts
Interior gallery
Dealer contacts
Entrance Steel Door Models
Maximum comfort with premium thermal and acoustic insulation for reliable protection against cold and noise
Top seller
| | Designed for cold climatic zones, city apartments on the outer floors, houses with apartment heating, rooms with air conditioning |
| | Premium thermal and sound insulation system for maximum comfort |
| | Locking system with locks of the 4th class of burglary resistance and the possibility of changing the secret of the locks without dismantling |
| | A wide range of decorative finishes and designs will allow you to create a stylish and original image of your door |
Purpose
To an apartment
To a house subject to compliance with the operating rules
For premises with increased requirements for protection against cold and noise
Individual door size
Complies with GOST 31173-2016
5 year warranty
41 200
Retail prices in brand stores and points of sale may differ from the prices on the website.
For up-to-date information, check with official dealers in your city.
Learn about the configuration and prices
Design
Curved door leaf, 80 mm thick
A welded metal structure made of 2 sheets of metal is a system of profiles of complex configuration based on a solid-bent outer steel sheet.
Increases the resistance of the door to static, dynamic and impact loads.
Outer metal sheet
A one-piece welded sheet of metal with a profile of complex configuration.
Bearing structural element of the door leaf.
Inner metal sheet
A sheet of metal covers the internal structural elements of the door leaf.
Increases the rigidity of the door leaf structure.
Door frame reinforced, 100 mm deep
The door frame is a closed welded frame, the additional rigidity of which is achieved thanks to special bent profiles.
Protects against force methods of breaking and opening.
Mineral wool board, layer thickness 80 mm
Mineral wool board M 15 is used as a heat-insulating material for the door leaf.
Environmentally friendly, resilient, non-combustible material does not crumble or break.
Provides a high level of heat and sound insulation of the door.
Stiffener, 3 pcs
Vertical profiles (in the form of P), give rigidity to the design of the door leaf.
They increase the resistance of the door leaf to force breaking methods, prevent the door from ripping open when opened in a destructive way.
Retaining element
Hooked protrusions in the cavity of the door leaf for fixing the mineral wool board.
They prevent the settling of the heat-insulating material during the operation of the door.
Door hinge, 2 or 3 pcs
Movable element of the door structure for attaching the leaf to the door frame.
Depending on the requirements and operating conditions of the door, hinges may differ in design, appearance, technical characteristics.
Provide opening of a door on an angle from 180 º.
Contribute to the easy movement of the door leaf when opening / closing the door.
Sealing ring, 2 pcs
Hollow rubber seal, has a porous structure, designed for a snug fit of the leaf to the door frame around the perimeter.
Ensures the tightness of the door leaf and frame, contributes to the soft closing of the door.
Interior decoration panel, 6-20 mm thick
Decorative panels are represented by a wide variety of materials, design solutions and colors.
Provides an aesthetic appearance and helps to increase the level of heat and sound insulation of the door.
Anti-removal retainer (static bolt), 3 pcs
Metal rods for blocking the door leaf in the door frame.
Securely fix the door leaf in the door frame in case of sawing off the hinges.
Lock pocket
Metal profile in the shape of a pocket to reinforce the lock area of the door leaf.
Increases the resistance of the door leaf to forceful and destructive breaking methods.
Night valve
An additional movable bolt for locking the door from the inside, installed separately or as part of the lock design.
Designed to lock the door from the inside without the possibility of unlocking the door from the outside.
Wide-angle peephole, 180-200º
An optical device with an eyepiece or an electronic device with a digital panel (video peephole).
Provides the possibility of hidden inspection of the space directly in front of the door.
Mounting plate, 6 pcs
Removable metal plates for fixing the door frame in the doorway.
Provide rigid fixation of the door frame in the doorway.
Diagonal reinforcement
Metal plate, gives the door leaf additional rigidity.
Prevents sagging of the door leaf during operation.
Metal surface coating
The polymer-powder coating of the leaf and the box is distinguished by high protective and decorative properties.
Protects the metal surface from corrosion, has an attractive appearance, retains protective and decorative properties for the entire life of the door.
Exterior decoration
The design of the outer side of the door can be made without finishing (smooth metal sheet), with a metal finish or a decorative panel, 6-20 mm thick.
Provides an aesthetic appearance, increases resistance to burglary and helps to increase the level of heat and sound insulation of the door.
Ledgers
Vertical bolts driven by the main lock, allow you to lock the door leaf up and down.
They provide multi-point locking, prevent vandal opening by wringing out the upper and lower corners of the door leaf.
Mortise locks
Mechanical, electronic or combined device for fixing the door leaf in the door frame.
The complete set of the door includes the Guardian / Cisa / Mottura locks of the 4th class of burglary resistance (GOST R 5089-2011) and the Guardian electromechanical lock without external signs of installation.
They provide reliable locking of the door leaf, protect against the most common opening methods, and contribute to the comfort of door operation.
Curved door leaf, 80 mm thick
A welded metal structure made of 2 sheets of metal is a system of profiles of complex configuration based on a solid-bent outer steel sheet.
Increases the resistance of the door to static, dynamic and impact loads.
Outer metal sheet
A one-piece welded sheet of metal with a profile of complex configuration.
Bearing structural element of the door leaf.
Inner metal sheet
A sheet of metal covers the internal structural elements of the door leaf.
Increases the rigidity of the door leaf structure.
Door frame reinforced, 100 mm deep
The door frame is a closed welded frame, the additional rigidity of which is achieved thanks to special bent profiles.
Protects against force methods of breaking and opening.
Mineral wool board, layer thickness 80 mm
Mineral wool board M 15 is used as a heat-insulating material for the door leaf.
Environmentally friendly, resilient, non-combustible material does not crumble or break.
Provides a high level of heat and sound insulation of the door.
Stiffener, 3 pcs
Vertical profiles (in the form of P), give rigidity to the design of the door leaf.
They increase the resistance of the door leaf to force breaking methods, prevent the door from ripping open when opened in a destructive way.
Retaining element
Hooked protrusions in the cavity of the door leaf for fixing the mineral wool board.
They prevent the settling of the heat-insulating material during the operation of the door.
Door hinge, 2 or 3 pcs
Movable element of the door structure for attaching the leaf to the door frame.
Depending on the requirements and operating conditions of the door, hinges may differ in design, appearance, technical characteristics.
Provide opening of a door on an angle from 180 º.
Contribute to the easy movement of the door leaf when opening / closing the door.
Sealing ring, 2 pcs
Hollow rubber seal, has a porous structure, designed for a snug fit of the leaf to the door frame around the perimeter.
Ensures the tightness of the door leaf and frame, contributes to the soft closing of the door.
Interior decoration panel, 6-20 mm thick
Decorative panels are represented by a wide variety of materials, design solutions and colors.
Provides an aesthetic appearance and helps to increase the level of heat and sound insulation of the door.
Anti-removal retainer (static bolt), 3 pcs
Metal rods for blocking the door leaf in the door frame.
Securely fix the door leaf in the door frame in case of sawing off the hinges.
Lock pocket
Metal profile in the shape of a pocket to reinforce the lock area of the door leaf.
Increases the resistance of the door leaf to forceful and destructive breaking methods.
Night valve
An additional movable bolt for locking the door from the inside, installed separately or as part of the lock design.
Designed to lock the door from the inside without the possibility of unlocking the door from the outside.
Wide-angle peephole, 180-200º
An optical device with an eyepiece or an electronic device with a digital panel (video peephole).
Provides the possibility of hidden inspection of the space directly in front of the door.
Mounting plate, 6 pcs
Removable metal plates for fixing the door frame in the doorway.
Provide rigid fixation of the door frame in the doorway.
Diagonal reinforcement
Metal plate, gives the door leaf additional rigidity.
Prevents sagging of the door leaf during operation.
Metal surface coating
The polymer-powder coating of the leaf and the box is distinguished by high protective and decorative properties.
Protects the metal surface from corrosion, has an attractive appearance, retains protective and decorative properties for the entire life of the door.
Exterior decoration
The design of the outer side of the door can be made without finishing (smooth metal sheet), with a metal finish or a decorative panel, 6-20 mm thick.
Provides an aesthetic appearance, increases resistance to burglary and helps to increase the level of heat and sound insulation of the door.
Ledgers
Vertical bolts driven by the main lock, allow you to lock the door leaf up and down.
They provide multi-point locking, prevent vandal opening by wringing out the upper and lower corners of the door leaf.
Mortise locks
Mechanical, electronic or combined device for fixing the door leaf in the door frame.
The complete set of the door includes the Guardian / Cisa / Mottura locks of the 4th class of burglary resistance (GOST R 5089-2011) and the Guardian electromechanical lock without external signs of installation.
They provide reliable locking of the door leaf, protect against the most common opening methods, and contribute to the comfort of door operation.
Technical features
View specifications
M4 class
Strength class
GOST 31173-2016
Rigid construction with reliable protection against forced hacking
1 class
Sound insulation class
GOST 31173-2016
Premium class sound insulation
47 dB
Soundproofing index
Noisy outside - shouting, laughter; inside is barely audible - a whisper of a person
86 mm
Minimum door leaf thickness (complete)
Increased insulation layer
2 pcs
Number of metal sheets
Increased rigidity of the door leaf
Technological features
Curved door leaf
Welded construction of 2 sheets of metal with a solidly bent outer sheet of a profile of complex configuration to increase the resistance of the door to deformation during breaking by force.
Vertical stiffeners
The design of 3 vertical profiles (in the form of "P") along the entire height of the door leaf to increase the resistance of the door to deformation and ripping during forced and destructive break-ins.
Lock pocket
A metal profile to reinforce the locking area of the door leaf and increase resistance to deformation and ripping during forced and destructive break-ins.
Diagonal door leaf reinforcement
A metal plate in the upper corner of the door leaf on the bearing side to prevent the door from deforming under the weight of the structure.
Closed reinforced door frame
A hollow metal welded frame made of profiles of complex configuration to increase resistance to deformation during breaking by force.
See model description
Features
Safe bag with 2 mm metal thickness
The possibility of manufacturing a leaf and a door frame from metal with a thickness of 2 mm can significantly increase the rigidity and strength of the structure, increasing resistance to forceful and mechanical methods of breaking and opening.
Three-way locking system
The possibility of equipping the locking system with vertical bolts driven by the main lock allows you to lock the door leaf up and down with additional bolts, providing multi-point locking and preventing vandal opening by pressing the upper and lower corners of the door leaf.
Armor package
The possibility of installing an armored package with protection of the lock zone of the door leaf and frame, locking mechanisms of locks and keyholes, allows you to increase the security of the door to the level of business class doors.
Armor plate
The possibility of installing an armor plate allows you to reliably protect the cylinder mechanism from drilling, pulling out and knocking out.
Recoded locks
The ability to install a locking system with locks of the 4th class of burglary resistance and a recoding function allows you to replace the lock secret without dismantling the door leaf.
Samsung biometric lock 728
Possibility to install smart lock Samsung 728 with fingerprint biometrics and access control system with RF cards/key fobs.
Allows to increase functionality and comfort of operation of a door.
Guardian Cyber Lock with Biometrics
The possibility of installing an electromechanical lock Guardian "Cyber" with biometric access control - fingerprint. Smartphone access control in the "Ekey home app".
Allows to increase functionality and comfort of operation of a door.
Guardian Cyber+ lock with electronic keys
The possibility of installing an electromechanical lock Guardian "Cyber +" with electronic keys - RFID key fobs. Access control from a smartphone in the ESMART Access application.
Allows to increase functionality and comfort of operation of a door.
Electromechanical lock
The possibility of installing an electromechanical “invisible” lock Guardian with remote control, allows you to hide the presence of an additional lock, increases the comfort of using the door.
