Hooks to hang plates on wall
How To Hang Plates on the Wall (The Best Plate Hangers & More!)
Updated: by Kris Jarrett
Want to know how to hang plates on the wall? I’m sharing my tips & tricks and the plate hangers that I used to get the job done right!
For months I kept my beautiful new plates sitting in a cabinet where they weren’t used or seen. And the big bare wall in my dining room? It stayed bare. Because honestly the whole idea of designing and hanging a decorative plate wall intimidated me. But last month I finally did it – I hauled my plates out of the cabinet and hung them up on our dining room wall:
It turned out to be one of my favorite dining room wall decor ideas! The trickiest part was figuring out the how-tos of hanging the plates so I thought I’d share what worked best for me, what’s worked for others, and why you may want to choose one method of hanging plates over the other (post includes affiliate links – see my full disclosure statement {here}):
Step 1: Figure Out How You Want to Arrange Your Plates
Take all the plates that you’re thinking about using in your plate wall and lay them out on the floor. If you space constraints for the wall that they’ll be hanging on, it helps to put some painter’s tape on the floor to mark the max width and height that you have to work with. Arrange and rearrange until you figure out a design that you love!
All of my plates are from Juliska – the ones with the printed scenes are from their Country Estate collection in Flint color that you can find {here}. I also have two of {these dinner plates} from their Berry & Thread collection, and multiple different sized plates from their Jardins du Monde collection {here}. The center platter is the Jardins du Monde grande charger that is no longer available but can sometimes be found on eBay {here}.
Step 2: Trace Each Plate on Paper
I wanted to see the arrangement up on the wall before nailing in 20+ hangers and realizing that I should have shifted it up or down or changed some plates around so I traced the plates on kraft paper and cut each of them out. Once each plate was cut out, I drew both a horizontal and vertical line through the center of each paper plate, which helped me line them up evenly on the wall using a level (I wish I was a girl who could just wing it and not worry if things don’t line up quite right but I know myself enough to know that it would bug me if the arrangement was visibly “off”…).
Step 3: Tape Your Templates to the Wall
Once I had my plate templates arranged and level on the wall, I taped them to the wall with LOTS of tape to make sure they wouldn’t fall down overnight (I was doing my hanging the next day). And then when I was getting my girls their breakfast the next morning, I heard a rustling in the dining room and found them in a heap on the floor. Nooo! I had used Delicate Surfaces painter’s tape and it didn’t hold. Ugh. Lesson learned. I redid the arrangement but this time used regular painter’s tape and put a tiny nail through the center of each plate just to be extra sure we didn’t have a repeat incident.
Step 4: Figure Out the Best Plate Hangers for You and Hang Them Up!
My original plan was to hang my plates using {these} Disc Hangers, which are adhesive discs that you adhere to the back of your plates. The advantages of the Disc Hangers are that they allow your plates to hang flat against the wall and they are invisible once you hang them. Unfortunately, I realized that most of my plates have a raised pattern on the back – definitely not a good surface for adhering a flat Disc Hanger.
The other disadvantages of the Disc Hangers are that you can’t easily remove them to use the plates – I wanted to be able to take some of the platters off of my wall if needed to use them for serving food at parties every now and then and the Disc Hangers wouldn’t allow me to do them. Also, according to the reviews some people have had issues with their plates fall off the wall when using them. But there are others who have used them with beautiful results (and no broken plates!) such as Emily of Timeless Paper who used them to hang this gorgeous plate wall over her bed (don’t you love it?!):
Since the Disc Hangers weren’t going to work for me, I ended up hanging my plates using Tripar’s white vinyl coated plate hangers found {here}. Beware that they do “run small” – my 9″ plates did not fit the 7″-9″ hanger size – I had to use the 10″-14″ size.
Since they are vinyl coated, they won’t scratch the plates like plain wire hangers can and I love that when you use this type of plate hanger, you can easily remove the plates from the wall and use them. The key to working with these hangers is to bend the top of the hanger so that your plate will lay flat on the wall once hung. The best way to do this is to first attach the plate hanger to the plate and lie the plate on a flat surface. The top of the hanger should (barely) touch the flat surface that your plate is lying on. If it doesn’t, take the hanger off the plate, bend it, and place it back on to see if it’s where you need it to be.
Once all of your plates have hangers, it’s time to get them up on the wall! I used {these OOK picture hooks} – hook your OOK hook onto the wire hanger that is attached to your plate and measure the distance from the top of the plate down to where the nail will go into the OOK hook. Transfer this measurement to your plate template and gently tap the OOK hook nail in just a bit.
Then remove the template from the wall, put the nail through the OOK hook, and hammer it in at the same spot that you tapped it into moments ago. Now hang your plate!
Repeat.
It’s definitely my favorite thing about our dining room – you can take a tour to check the entire space out including a bunch of fun “before” and “after” pics (it wasn’t too pretty when we moved in!) {here}!
- Pin
- Share
Categories: Decorating Tips Tags: wall art
✉️FREE EMAIL SERIES ✉️
5 Secrets to Reinventing Your Home on a Budget
Simple tips to instantly transform five rooms in your home!
Reader Interactions
How to hang plates on a wall – an expert guide
Hanging plates on a wall is a little trickier than hanging pictures. First, there's their fragility, their varying shapes and sizes, and, of course, weights. However, a plate wall can be extraordinarily beautiful, individual and can make for a wonderful accent feature in a room.
See: Home makeover ideas – simple ways to transform your home
'The selection of art is an intensely personal and often costly process,' says Emma Sims Hilditch, founder and creative director of Sims Hilditch, who is something of a plate wall expert. 'For those looking for a more economical and slightly different way to fill a blank space in a room, then a plate wall is a great solution and is easier to do than you might think.'
Below, Emma demonstrates the simple process in easy steps – including her tips for getting the process just right.
How to hang plates on a wall
(Image credit: Emma Sims-Hilditch)
'When choosing the plates, try to select a range of sizes and a variety of origins,' says Emma. 'Plates which carry meaning or a message are great additions to the design as they help it to become a meaningful part of the home.'
Follow her instructions below – and see Emma's video on hanging plates for more tips.
See: 5 tips for displaying china – plate wall inspiration, plus more ways to create a beautiful arrangement
1. Measure the wall
'Use a tape measure to work out the dimensions of the plate wall first and arrange the plates accordingly on the floor,' says Emma.
It's useful to mark with pencil or tape the central point of the plate wall. This is where you will hang your first plate. It can also be helpful to use low-tack masking tape to mark out the boundaries of the plate display on the wall – and to repeat the exercise on a table or the floor to ensure the plate display you are planning will fit comfortably into it.
2. Measure your plate arrangement
'Draw a rough sketch of where the plates will be positioned and record the measurements on paper,' says Emma.
Use this as a guide to arrange the plates on the table or floor within your taped boundaries – and adjust it until you are happy with it.
'Once the plates are arranged, measure the distance to the top of each plate starting from the highest point down, with the topmost plate being ‘0’. Then mark these measurements on the wall,' says Emma.
3. Create templates of the plates
Draw around each plate on to separate pieces of paper and cut them out to create templates. Stick each template to the wall in the arrangement you have planned on the floor. Now stand back and adjust the arrangement until you are happy with it.
'Try to stick to the measurements as a guide at this stage, but remember that this is an artistic process which may be deviated from slightly to add creative flair!' says Emma.
See: Cottage decorating ideas – charming ways to get a characterful look
4. Clean the plates
'Before hanging, clean the back of each plate where an adhesive disk with a hook will be applied.'
Ensure you clean the front of the plates, too, so that your display isn't marred by fingerprints.
5. Prepare the plates for hanging
'Prepare the disk (‘The Original Invisible Plate Hanger ’) by applying water to the back and rubbing it with your finger for five to 10 minutes. Stick it on the underside of the plate and leave it for 24 hours to bond.
'Once the plates are ready, find the center point on the wall and use the measurements/templates previously recorded to place a hook point where each plate will be positioned, before finally hanging them according to the design.'
6. Hang plates with Command Strips
Hanging plates with Command Strips means that you don't need nails or screws and you can remove or rearrange the plate display without damaging the wall. However, it does mean that the bottom of the plates needs to be flat to the wall – and plates with a lip underneath won't be able to be displayed with Command Strips – although Command Hooks should work if the plate has a hole for you to be able to attach to the hook with string threaded through it.
Assuming you can use them, clean the back of the plates thoroughly, stick the adhesive strip to the wall and another to the plate then press together until you are happy they are attached.
7. How to hang plates with plate hangers
Plate hangers grip the rim of the plates in three or four places and have a clasp at the back of the plate that you can hook over a nail. The important part of this process – other than getting the nail firmly into the wall – is to ensure the plate hangers you choose are the right size: too small and the plates are in danger of falling.
See: Interior design tips – decorating secrets for the world's top experts
The downside to plate hangers? You can see the grips from the front of the plate, so be ready to touch them up with paint – or even nail varnish – that matches the color of your plates so that they blend away.
Ways to Hang Small Plates and Bowls on the Wall - Home Ideas
Placing plates and bowls on the wall showcases your collection and makes a personal statement, especially suitable for a living room, dining room, foyer or breakfast nook. Whether you're hanging one special dish over your fireplace or filling your wall with a themed collection, plenty of hangers will get the job done.
Hints
Large glass or ceramic plates created as works of art often require special hangers. Consult the gallery or product retailer for access to the correct hanging hardware.
Tensile Wire Hangers
Wire plate hangers consist of two pairs of prongs connected by a spring with an attached hanging loop. Choose a hanger that is the right size for your plate.
- Slide the teeth onto opposite sides of the plate.
- Adjust the suspension so that the lugs are even and the plate is level when suspended.
- Attach the hanging loop to a nail or wall hook. These hangers can be removed if you no longer want to hang the plate on the wall, but the protrusions may leave marks on the edges of the plates.
Hangers are best for shallow plates and bowls, not deep ones.
Adhesive hangers
Adhesive hangers, consisting of a water-activated adhesive pad attached to a wire hanging loop, allow you to hang plates, bowls, trays and unusually shaped decorative glass or ceramic objects. Multiple sizes available; each size indicates the maximum plate weight that can be safely used with the hanger.
- Dampen the adhesive and place the pad on the flat bottom of the plate or bowl.
- Once the adhesive has dried according to product instructions, hang the plate by looping it over a nail or wall hook.
- To remove the plate from the wall display, wet the adhesive pad and remove it without damaging the plate.
DIY Small Plate and Bowl Hangers
For light plates and bowls less than 6 inches in diameter, inexpensive hangers can be made from paper clips and hot glue.
- Bend one loop of the paperclip at about a 45 degree angle to form a hanging loop.
- Hot glue the other side of the paper clip to the flat bottom of a plate or bowl.
- For a finished look and a stronger hold, cut a piece of felt about 2 inches in diameter and hot glue it to cover the part where the paperclip attaches to the plate.
- Allow the adhesive to cure for at least an hour before hanging the plate. This type of hanger cannot be removed from the plate.
Ribbon hangers
Ribbon and a decorative hook make a conspicuous and attractive way to hang plates or plates with pierced rims. Use satin or other soft ribbon at least 1/2 inch wide.
- Thread the tape through the holes around the plate and tie it into a loop long enough, usually 4 to 6 inches, to allow the plate to be snug against the wall.
- Tie the ribbon securely in a double knot or bow.
- Trim the ends of the tape with scissors or blot with clear nail polish to prevent fraying.
- Place the decorative hook in the desired location and hang the ribbon loop on the hook.
Tips
If you want to use a ribbon to hang a plate without a pierced edge, attach another type of plate hanger and tie the ribbon to it.
Arranging and Hanging a Plate Wall
Plates and bowls have more impact when they are hung in a group. You can create a patterned group, such as one large plate circled by smaller ones, or a custom shape that you can add as your collection grows. No matter what you choose, paper templates will help you get each plate or bowl in the right place the first time.
Things you need
Step 1
Attach hangers of your choice to the back of your plates or bowls. Turn each plate face down on a large piece of paper and trace around with a pencil. Cut out the template and mark it criss-cross horizontally and vertically to provide hanging guidelines. Measure the distance from the top of the plate to the hinge of the attached hanger and mark this distance from top to bottom on the vertical guide of the template.
Step 2
Position the templates on the wall as desired, using pieces of masking tape to hold them in place. If your plates are oval or rectangular, use a spirit level to check the position of the horizontal rails.
Step 3
Install the hangers according to the templates when you are satisfied with the arrangement. For each template, drive a nail into the template at the guide mark, hitting hard enough to mark the wall. Remove the template and install the appropriate nail, screws or wall hook on the mark. Continue until all nails or hooks are installed and hang plates and bowls.
Warning
- Ensure that all hangers and wall hooks can support the weight of the plate or bowl. Even small picture hooks hold up to 10 pounds, which is enough for most plates and bowls.
- Avoid hanging plates and bowls in high traffic areas where they can be knocked off the wall by people moving back and forth.
- Do not hang valuable antique plates or bowls. Irreplaceable things are best displayed in a cupboard.
do-it-yourself mount - Mediasvod
Creativity
from the author Mediasvod
Decorative ceramic plates on the wall are now gaining new popularity.
how to hang a plate on the wallIn this article you will find 6 easy ways to hang ceramic plates on the wall and get inspiration.
6 ways to hang decorative plates on the wall
1. Hang the plate on the wall without nails
The easiest fastening method that does not require nails, which does not even require you to be able to drill walls and is to buy special double-sided Velcro at the stationery store .
- if the plate is small, it is enough to stick one Velcro on it and attach it to the wall,
- if it is larger, several on the plate.
Remember that the weight of the plate must be taken into account in this method if you want it to remain intact.
2. Use the base
- Glue any base to the plate - it can be a block of wood or a piece of six cans. There is only one condition - the base must be solid, keep its shape and not become limp from the glue.
- We are waiting for our base to dry on a plate.
- And then we attach the base with the plate to the wall.
Which glue is better to take? Liquid nails or "cold weld" adhesives work well.
3. DIY wall plate holder
Glue the ribbon to the plate and stick a circle (square, or whatever you like) of paper on top to secure the ribbon and make it more secure.
4. Fixing the plate with duct tape or plaster
If you have a light ceramic plate and have a plaster on hand, you can use that too. When you attach the ribbon, keep in mind that its end must be quite long in order to glue it abundantly along the entire length, in order to prevent the ribbon from slipping out from under the patch.
5. Fastening with a paperclip, wire and hairpin
You can also make a circle-mount from an ordinary olive lid, for example. Or take a wire or a hairpin
- You can use a gun with silicone rods. The main thing is to warm it up well and quickly attach the wire, pin to the plate.
- In all these methods, for the best result, you need to start degreasing the back surface of the plate from , you can even scratch it a little so that the adhesive materials do not lag behind and securely hold the fasteners.
6. Ready-made hooks for ceramic plates on the wall
You can also use special stand-mounts that are attached to the wall, and a plate is placed in them, or several, depending on the size of this stand.
There are 2 types of these holders:
- metal on a spring basis,
- self-adhesive circles with eyelets.
Special self-adhesive circles with loops are sold in hand-made shops or specialized art workshops that can be attached to a plate. Or the same type of attachment, but requiring the application of superglue to attach to the surface of the plate.
How do I choose a commercial wall mount? Only by the weight of the plate: if the plate is massive, then the best option is on a spring, if the plate is small, then take a self-adhesive one.
The process of mounting plates to the wall
Before attaching the plates to the wall, it is highly recommended to make a paper layout first. This is especially true if you use nails for fastening. Yes, and without a nail fastening - if the plates are not properly glued, it will also leave an unsightly flaw on the wall.
- We put the plates on the paper, circle them and cut them out. This will give you the exact diameter of the plate
- Lay out the layouts on the wall.
- We fix them with mounting adhesive tape for painting - it does not leave marks on the paint or on the wallpaper.
- Outline with chalk or pencil, which can be easily removed from the wall.
How to hang decorative plates beautifully
You can place and hang plates on the wall in different ways, while taking into account the style of the interior. Here are some ideas for inspiration:
Creative clutter
If you like "creative clutter", you can hang plates of different sizes randomly.