Home » Misc » Bathroom tile all walls

Bathroom tile all walls


How Much of Your Bathroom Should You Tile?

Where should you put the tiles in your bathroom? All over? Just around the shower? On a sloping ceiling? Amid the array of choices to be made when renovating a bathroom, this is one of those that could really affect the cost of your project, since tiling is a highly skilled job. Equally, it can make or break the look of your finished room.

It pays to be working with an interior designer or architect whose taste you trust. They’ll be full of ideas (and reassuring decisiveness). Meanwhile, let these designs get the creative cogs turning.

EMR Architecture

Tile the Bare Necessities

In this walk-in shower room, tiles only cover the parts of wall that will get wet. The floor, shower walls and behind the sinks. The designer has chosen to match the grout carefully, so it’s virtually invisible, giving a smooth, streamlined look.

Find a bathroom designer on Houzz

Emma Merry Styling

Take It Halfway

The tiles in this bathroom run around the walls uniformly at shoulder height for a very neat look. The details that make this style of tiling work are the choice of paint color on the walls above, and the trim, which is key to helping tiles run nicely into a plain wall.

Here, the soft pink paint color works beautifully with the brass fixtures and dark blue vanity, while the trim is stylish brass —visible as a design detail but not too loud.

Shop for bathroom tile

TG-Studio

Go Top to Bottom

Floor-to-ceiling tiles can lend a real air of swish hotel style to a bathroom. This windowless space has pale tiles covering every bit of wall, and even the bath panel, for total streamlining.

Where natural light is lacking, visual continuity like this can really help to open up a dark room (and larger tiles, like these, can also have the effect of stretching a smaller space).

Although the floor has different-colored tiles, they blend with the ceiling, bath and basin for an unfussy look.

Orchestrate

Here, the same all-over approach has been taken with the tiling, but in this case, the bright room gives more scope for a busier choice of tile —smaller in size and varied in tone.

The key to keeping the whole look airy and bright is the pale palette. The color variation is gentle and doesn’t break up the view, which is already punctuated by the bold black faucets and shower hardware.

Floors of Stone

Make Half Tiling Have a Purpose

The tiling in this scheme is the star of the show, yet it barely covers half of the room. The designer has given ordinary white subway tiles standout by laying them in a herringbone pattern. At the same time, the painted sections feel deliberate — the area above the basin is for storage and a mirror, while the other end of the shower (just seen in the reflection), which is finished with a stylish jagged edge, leaves room for a cabinet.

Shear Construction

Work in Feature Tiling

If you’ve fallen for more expensive tiles, but aren’t sure the budget will stretch, consider using them in a small area of the bathroom. Reduce usage even more if needed by choosing just enough tiles to protect the area directly behind the sink. Keep other tiles plain to maximize your feature.

Streamline a Slope

Attic conversions often include a new bathroom, and it’s not always obvious where tiling should start and finish. This walk-in shower is fully tiled, as the ceiling is low and likely to be doused daily.

The tiles continue at half-height in the rest of the room, but what’s clever is how they’re connected: The two triangular tiles on the narrow walls at either side of the shower link the awkwardly shaped enclosure with the rest of the space by helping the line of tiles to flow smoothly. Proof that the small touches are sometimes the ones that make a room.

In this attic bathroom, the sloping ceiling is high enough to avoid too much of a soaking, so tiles only cover the walls. Be sure to use appropriate paint in a design like this, though, as splashes are inevitable.

More on Houzz
Read more bathroom design stories
Find a bathroom remodeler
Shop for bathroom products

Find the right local pro for your project

Sponsored

Ihr starker Partner auf dem Weg zu Ihrem Traumobjekt

Sponsored

Ihre Baufirma mit Know-how

Fully Tiled Bathroom Walls (Pros and Cons)

Here’s our fully tiled bathroom walls guide with their pros and cons, cost and differences between full and halfway tiled bathroom walls to help you choose the best design for your home.

Tiled bathrooms are regarded as classic and it’s not a surprise considering it makes the bathroom looks cleaner and lighter. There are different kinds of tiles you can try out, as well as a variety of designs to choose from.  

It can be stressful if you have to start with zero knowledge of tiled bathrooms. This is the chance to know more about a full tile wall design.

Table of Contents

Tile Entire Bathroom Pros and Cons

Are you planning to get your bathroom walls tiled but you don’t know if it’s the right thing to do? One thing that can help you make a decision is by weighing its pros and cons. 

In knowing the benefits you can get and the possible problems you may encounter, you will have a better grasp of what you need and can handle.  

Here are the pros and cons you can expect from choosing to fully tile your bathroom walls. 

Pros

Fully tiled bathroom walls have several advantages you can benefit from. Here are some of these benefits:

Durable – tiles are durable and when you use a good quality one with an excellent quality installation and good maintenance, your tiled walls can last up to 20 years.  

Cost-effective – tiling is an affordable option you can have for your bathroom wall, especially since it is cheaper than hardwood flooring. There are also cheaper materials available you can use and you can save money on other costs like skimming and painting. 

Water-resistant – tiles are water-resistant, which makes them perfect to be used in your bathroom walls. 

Flexible and Unique Designs – there are abundant tile designs available for your picking, as well as tiles with different shapes, textures, and colors! Check our gallery of modern bathroom design ideas.

Makes the room look spacious – bathrooms are smaller than other rooms in the home so installing something that will make it feel bigger is always a good option. Read more about small bathroom ideas here.

Easy Maintenance – tiles are easy to clean and maintain so if you have fully tiled bathroom walls, you won’t have to spend too much or exert effort on them. A vacuum, wet cloth, and a broom will do.  

Cons

Once you choose to have fully tiled bathroom walls, there are some of the disadvantages you can expect.

Cold – tiles do not hold onto heat well so during winter it can be quite cold. This won’t be that much of a problem if you choose to have fully tiled bathroom floors rather than tiled flooring. 

Imbalance – when not properly installed, the tiling job can be easily imbalanced in certain areas so it’s important to make sure that everything is in place. 

Hard and Slippery – tiles are naturally hard and they can get slippery when you stand on tiled flooring. With fully tiled bathroom walls, this won’t be much of a problem. 

Heavy – if your bathroom is on the upper floors, make sure that the structure can handle the weight of the tiles you’re about to install. Tiles are heavy and so can put extra stress on the structure.

Expensive Overhaul – renovating will require you to take out and replace everything, and this can be very expensive.

Why Tile Bathroom Walls

After learning more about the pros and cons you can get from choosing fully tiled bathroom walls, have you decided on what to do? If you’re still unsure about choosing tile bathroom walls, here are the reasons you can also consider.

1. Tiles allow light to bounce, which will make your bathroom look brighter and wider

2. Choosing fully tiled bathroom walls means cutting material cost if you choose other wall options

3. Partially tiled bathroom walls normally have mold problems, which you won’t have to experience with fully tiled bathroom walls. And this can be an annoying problem considering bathrooms are almost always wet and moist. 

Fully Tiled Bathroom Cost

Another element that should be discussed before you dive in deep to fully tiled bathroom walls is cost. 

Tiles can be affordable but like all project materials, the cost is highly affected by the specific materials used. If you choose tiles with higher quality, expect higher cost.

If you choose lower-end tiles, expect lower cost. See the popular types of bathroom tiles here.

The good thing is that there’s always a middle ground. Find the material that fits your budget and your vision of what you want your bathroom walls to be. 

To be specific with the cost though, the average cost is $12.50 per square foot (including the materials and the labor). The entire project can range from $450 to $10,000.  

This can change depending on how big your bathroom is, what tile you choose to install, and how long it took to complete the tiling. 

The cost of the labor is between $600 and $800 so if you know how to install the tiles, this can save you a lot of money. 

Whatever you decide on though, make sure you have enough budget before you start the project. And don’t forget to shop for prices of the different tiles to help you budget your money!

A Fully Tiled Bathroom Wall Vs Half Way Tiled

Before you start shopping for tiles, make sure that your decision is final. It will be a lot harder if you’re already in the middle of the project and you suddenly decide to just go for halfway tiled bathroom walls. 

Here are the differences between a fully tiled bathroom wall and a halfway tile bathroom wall. Hopefully, this can help you make up your mind. 

Fully Tiled Bathroom Walls Halfway Tiled Bathroom Walls
Easy Maintenance Possible Mold Problem
Restricted to Choice of tiles Flexible Decoration Options
Less Material Cost (Painting, skirting, etc.) Skirting Boards Required
Expensive Overhaul Affordable/Inexpensive Renovation
No Decorations Needed except Tiling Possible Imbalanced Design & Style
Difficult to Fit Shelves Flexible to Accommodate Decor/Accessories
Increased Tiling Costs Option to Choose Premium Tiles (Smaller Area Coverage
Creates Spacious Feel Bathroom Size As Is

Choosing whether to have fully tiled or halfway tiled bathroom walls depends on you. With this information at hand though, it won’t be as stressful as not knowing anything at all. 

Make sure to weigh your options and consider all elements that can help you! You can also visit our guide to the best tile for shower walls for more ideas.

Tiles in the bathroom on half the wall. 6 ideas on how to save money on bathroom tiles

Contents

  1. Half wall bathroom tiles. 6 ideas how to save money on tiles in the bathroom
    • 1. WET ZONES
  2. Tile in the bathroom does not cover the whole wall. Requirements for finishing materials for the bath
  3. Tile and paint in the bathroom. Varieties and characteristics of tile enamels
  4. Tiles in the bathroom up to the middle of the wall. Bathroom Design Ideas
  5. Video how NOT to do tiling when renovating a bathroom. Laying tiles on tiles and painted walls

Tiles in a bathroom on half a wall. 6 ideas on how to save money on bathroom tiles

Bathroom remodeling is one of the most expensive renovations. But even here you can find something to save on without losing quality and harming aesthetics. If it is not worth saving on engineering work, craftsmen and mixers, then it is quite possible to save the family budget on expensive tiles. 6 economical bathroom solutions in our selection. nine0003

1. WET AREAS

One of the latest trends in bathroom interiors is tiling only in wet areas. In addition to being economical, it also looks very stylish. The remaining space can be decorated with moisture-resistant wallpaper with bright prints, decorative plaster, and even just paint the walls.

Only the shower area and the bathroom wall are tiled

2. TILES TO THE MIDWALL

If the first solution seems too radical, then you can stop halfway to the extravagant trend in the literal sense. Half-tiled walls also look very interesting. This technique looks especially good in separate bathrooms. nine0003

Tiles up to the middle of the wall look great in separate bathrooms

3. APRON AT THE WORKTOP

With the right selection of faucets and the sink itself, splashes flying in all directions can be completely avoided. And lay out the apron over the countertop in the same way as what is laid out in the kitchen. If a full-fledged bathroom is not expected in such a bathroom, tiles will only be needed for the shower area.

Apron lined from sink to mirror cabinet

4. BATHROOM CURTAIN

But, even if you want to give preference to a classic bathroom, then you can do without tiles. A vintage-style freestanding bathtub and a wrap-around screen solve this problem perfectly.

Vintage bathrooms look great with circular blinds

5. THE SIMPEST TILE AND CONTRAST GUT

If you still want to lay out the tiles, then you can choose the favorite option of Scandinavian designers - the simplest tile, which is decorated with a contrasting grout. nine0003

Stylish and very economical solution in Scandinavian style

6. MIRROR PANELS

A more economical analogue of tiles - mirror panels, which will look especially impressive in small bathrooms.

Guest bathroom accent wall with mirrored panels

Did you like our article? Like and subscribe to the DomUm channel so as not to miss new publications!

Tiles in the bathroom do not cover the whole wall. Requirements for finishing materials for bath

The main purpose of the bathroom is to perform hygiene procedures using water. Therefore, it is not surprising that the air in it is saturated with a large amount of water vapor, which can have a destructive effect on the finishing material and enclosing structures.

In addition, when taking a bath or shower, the thermal energy of the water is transferred to the air, which becomes very hot. Then, after the end of washing, the room cools down again. Constant temperature fluctuations also harm the lining of the walls, floor and ceiling of the bathroom. nine0003

Bathroom wall materials must meet certain requirements.

Tiles resist the described factors best of all. However, the price of this material is quite high and it is quite difficult to install. To stick ceramics on the walls, you should have certain skills and abilities.

Therefore, if you do not want to use this lining due to the complexity of implementation or for other reasons, you can use other options. However, an alternative to tiles in the bathroom must meet the following requirements:

Characteristic Description
Moisture resistance Decorative wall cladding in the bathroom must maintain its performance properties regardless of the level of humidity in the room. In addition, the finish should not let water through to the enclosing structures in order to keep them from destruction.
Durability The longer the life of the alternative finish, the better. After all, you don’t want to redo the repair after 2 years. Keep in mind that the finish will be affected by moisture and high temperatures. nine0092
Antiseptic Since the bathroom is a symbol of cleanliness, the surface of the decorative material must have antiseptic properties. Pathogenic microorganisms should not appear and develop on the walls and floor.
Durability The bathroom is always heavily used and not everyone treats decorative finishes neatly. Therefore, you need to choose an option that will withstand mechanical stress, including shock. In addition, plumbing and household appliances create a large load. This also needs to be taken into account. nine0092
Ease of maintenance The less soiled the surface of the walls and floor, the less often they need to be washed and the less effort it will take. I recommend buying a finish with a low porosity, as dirt does not linger on such a surface.
Easy to install If you are going to do the repair yourself, choose a material that is easy to install on the surface without the use of special tools and equipment. It is also better to avoid "wet" construction processes, which generate a lot of dust. nine0092
Environmental The material must be safe for humans and the environment. Moreover, this property should be preserved regardless of wetting and heating.
Chemical resistance Check that the selected finish will not deteriorate under the influence of household detergents and cosmetics. It is better if the decorative material can withstand exposure to aggressive chemicals.

Tile and paint in the bathroom. Varieties and characteristics of enamels for tiles

So how do you paint the tiles in the bathroom so that the coating lasts as long as possible? Immediately exclude water-based paints, as such decor will please you for a very short time. As noted above, there are two different ways to restore ceramics - full and partial. So, in each of the cases, you will need your own types of dyes.

Latex dyes cover the surface well and dry quickly

When completely changing the interior color scheme, acrylic, alkyd or oil enamels are usually used. Latex-based paints also work well. They perfectly lie on the surface, completely covering it. In addition, these dispersions dry quickly and do not have an unpleasant and pungent odor, unlike their oil counterparts. nine0003

However, before you can paint the tiles in the bathroom, you will need to carry out a set of preparatory work. This is due to the fact that these types of dyes are not intended for shiny flat surfaces and their service life will not be even a year if the tile is not first sanded. In addition, when painting, do not dilute the dye to reduce its consumption. Its consistency should resemble dense sour cream.

Since the cladding is often smooth and glossy, in case of a fragmented renovation, you will need special dispersions for glass or ceramic surfaces, so as not to spoil the entire wall, if necessary, apply a pattern or pattern. These dyes are able to form good adhesion even with such coatings, since they have a slightly different composition than latex or oil dyes. In principle, you can cover the entire wall with them. The only disadvantage of such a solution will be the too high cost of these dispersions, comparable to the purchase of a new tile. nine0003

Paints for glass and ceramics can create an interesting ornament or panel

If we talk about the technical properties of this paint, it dries fairly quickly at an average temperature of 20 to 25 degrees. In addition, if you want to create a pattern with a light haze effect, you can pour a little thinner into the enamel to remove the saturation of the color. This technique will help create a truly unusual bathroom interior.

Tile in the bathroom to the middle of the wall. Bathroom Design Ideas

Bathroom interior design with tiles is beautiful and stylish. Therefore, she never ceases to be popular. Designers often choose this particular finishing material. The tile is presented in a huge assortment. Different dimensions, textures, colors, ornaments, imitations make the interior interesting and original.

A non-standard solution is the image of nature on a tiled surface. Such a panel will bring a touch of mystery to the interior. Tiles can be laid not only as a standard option, but also by many others. It allows you to experiment and implement interesting design ideas. The use of tiles of more than one color looks original. Bright spots will make the overall look of the picture more interesting. Mosaic tiles of small size or large elements will allow you to revive the interior. nine0003

Tiles will help make the bathroom interesting and original

The design in several colors will look very nice

The classic color scheme is white. It is chosen by successful and self-confident owners. In second place is the blue and pale blue shade of the room. Dark saturated tones are used less often. They are suitable for spacious rooms. The atmosphere in them is solemn and strict. Red tiles are appropriate in oriental styles. You can also meet it as an accent on a plain surface. nine0003

There are a lot of design ideas for the bathroom. They differ in the style that is used for decoration, color and other characteristics. The tile makes it possible to realize original and interesting solutions. A unique and noble composition is created.

Video how NOT to do tiling when renovating a bathroom. Tile on tile and painted walls

Bathroom tile layouts

Choosing a good tile is half the battle. It is important to lay tiles in such a way as to emphasize the advantages of the material, adjust the features of the bathroom space, fit into current trends and create a design that is both original and easy to use.

The good news is that you don't have to use ready-made solutions from tile manufacturers' catalogs. Now there are so many options and ways to emphasize the color and texture of porcelain stoneware, creating a special style and rhythm in the space of the room, that it remains only to make the right choice. We understand together with the options for laying tiles and tiles in the bathroom. nine0003

Features of bathroom tile combinations

The bathroom is becoming more and more a “room” and not just a hygiene room with a standard design. This means that in its interior there is more room for imagination, ergonomics are becoming more important, and there are fewer and fewer restrictions when laying. Your bathroom can have ordinary furniture, you can plan a window here and even use wallpaper that is not harmful to water.

Most manufacturers offer a standard set of bathroom tiles, which includes:

Borders are becoming less common in modern bathrooms. They were originally designed for rooms with a fixed height that cannot be changed, to make tile cuts less narrow. But now the height during the repair can be changed using, for example, a stretch ceiling at the desired level.

Another function of the border, separating zones during installation, also does not work as it should: when you arrange furniture, arrange bottles and toothbrushes, place towels, the border can turn out to be “ragged” and ugly. nine0003

As a rule, you can find ready-made layout options in a store or on the manufacturer's website. But these "box solutions" are no longer a guide to action. The modern layout of tiles in the bathroom is the freedom of creativity.

How to choose bathroom tiles? We have devoted an entire article to the safety and quality parameters of tiles: "Tips for choosing bathroom and toilet tiles." But when it comes to design, there is no universal approach and no single solution, there are only general lines of thought:

Options for laying tiles in the bathroom

Let's analyze the main options and principles for laying tiles in the bathroom: each has its own characteristics, advantages and difficulties. The choice of option depends on the shape and type of tile and whether you have the time and desire to calculate the number of elements in advance. The effect you are striving for is also important: a sense of chaos and a flight of fancy or rigor and order. nine0003

Laying from a corner

The easiest and most unpretentious way to lay. Works with any rectangular elements, but looks pretty boring, plus the tiles will have to be actively trimmed. Sometimes this method can be combined with other layouts to achieve balance in the bathroom interior.

Work starts from the corner where the whole tile is to be laid. Further, the elements are simply laid on the grid one after the other, and the empty spaces are filled with trimmed tiles. nine0003

Laying from a corner is justified in only one case: you have calculated and measured the tiles in advance, taken into account the tolerances and the width of the joints, and are sure that an integer number of tiles fit on the wall. The second option: the tile in the bathroom has such a pattern that the undercut will not be noticeable. For example, vertical colored stripes.

Laying tiles from the center

This laying method involves starting from the center of the wall: this is where the central axis or seam is placed between two tiles. At the end of the row, there is usually a place with which you can do different things:

If the edge cuts are half the size of a tile or more, there is a good chance the design will be solid and complete. In all other cases, it all depends on the overall design of the bathroom: you can get an interesting image or create a feeling of negligence and incompleteness. If you want to disguise the installation, choose a grout that matches the tile, but remember that narrow stripes in the corner are conspicuous and disrupt the overall rhythm of the tile laying. nine0003

Alternating central laying

With this laying method, decorative elements and narrow pieces of material help to place the tiles without loss. Work starts from the center in different directions, at the end of each row a vertical decor is laid.

This type of installation looks frankly old-fashioned, although from the point of view of design it is more correct to lay tiles from the center than from the corner: the center of the wall above the bath is at eye level and attracts attention in the first place. nine0003

Ornamented placement

This is now called “tiled carpet”: it can be used on the wall or floor in the bathroom, it is only important that the tile pattern is visible and not disappearing under the furniture or behind the shower curtains.

If you choose this laying, it is important to correctly calculate the number of tiles and lay a contrasting border around the perimeter, matching the dimensions of the ornament with the dimensions of the furniture or large interior elements. Any mistake in the calculations will lead to a violation of the pattern and the destruction of the effect. Imagine that the washbasin has to be moved or replaced with a narrower one: the picture in the room will immediately change. nine0003

Patchwork

The effective method of randomly laying decor is not so simple: if you lay out the tiles thoughtlessly, the same elements will inevitably appear side by side, and this can be very striking. A patchwork quilt should be laid so that the same tiles are not next to each other along any axis.

Remember that the combined elements must have at least one common parameter: color, pattern or style. Before laying tiles on a wall, floor, or backsplash, lay out the floor to make sure the design is to your liking. It is better to choose the color of the grout that matches the main colors of the tile or neutral, gray or beige. nine0003

To make the patchwork stand out in the interior, it is better to place the pattern on the far wall of the bathroom, and decorate the rest of the walls with light-colored materials.

Kaleidoscope

The same elements of different colors are used in the kaleidoscope pattern. If the plane is large, it is better to choose shades that are more muted and closely spaced in relation to each other on the color wheel for styling. The softer the contrast, the more interesting the pattern will be.

Tiles in small and medium format look better when installed this way. An interesting idea would be to make the edges of the pattern "blur" the colors. To do this, the color panel is laid out on the floor of the room, and then the elements from the 3 extreme rows are mixed, unfolded and swapped. nine0003

Parquet version

Narrow and long tiles are laid like parquet on the floor or wall: herringbone or braided pattern. On the bathroom floor, parquet style can be maintained by choosing porcelain stoneware with a wood texture: you get a real imitation of an old expensive floor. And on the wall, laying will simply create an unusual and stylish tile pattern.

Herringbone laying involves joining the narrow sides with the wide side of another tile at an angle of 90 degrees. If you add decor and inserts, you get a "braid". You can use tiles of different colors and shades in the same room to add depth and originality to the installation. nine0003

Laying tiles with honeycombs

Hexagonal tiles have become fashionable: they are laid with “honeycomb” tiles, combining different patterns and colors, laying out patterns on a neutral background and even complementing the laying out with other materials.

Hexagonal tiles can be laid on walls and floors in a room, combined with tiles of other shapes and neutral backgrounds such as paintable walls. But there is a big “but”: it won’t work to lay it anyhow, you need an accurate calculation and preliminary layout of the tile, taking into account the width of the seam, floor irregularities, furniture placement, and so on. nine0003

Bathroom tile laying diagram

There are ready-made diagrams that will help you quickly decide how to lay tiles in the bathroom and learn from the mistakes of others what is good and what is bad.

Horizontal

Basic installation of non-offset rectangular tiles with or without horizontal accents. Horizontally oriented elements visually expand the space, especially if you have chosen a contrasting grout color. If the grout is neutral and the tiles are plain, there may not be a global difference between horizontal and vertical laying on the walls. nine0003

Horizontal accents also work well when the ceiling in the bathroom is very high: to avoid the “well effect”, the walls can be visually divided into parts using stripes and lines.

Placement and width of accents depends on your goals: somewhere a strict division into “white top” and “dark bottom” will be appropriate, somewhere the role of accents will fall on the contrasting tile seams. In any case, the size and location of the tiles should be coordinated with the location of the furniture and all the decorative elements in the bathroom, otherwise the efforts can be wasted. Horizontal and vertical styling accents are also appropriate on the floor of the room, but they work differently there, setting the interior rhythm and guiding the eye. nine0003

Vertical

Vertical placement of rectangular tiles is becoming an increasingly popular bathroom design technique: firstly, this installation looks unusual and unexpected, and therefore fresh, and secondly, the technique helps to create a solid interior and place the right accents, attract attention to certain areas with strategically placed tiles.

Vertical and horizontal accents should be carefully combined in the interior to avoid chaos. Please note that heated towel rails, showers, cabinets elongated upwards also serve as vertical accents and visually raise the ceiling of the room. nine0003

Contrasting zones

A great way to make the interior interesting and more functional, highlighting separate zones on the floor or on the walls of the room with laying.

Contrasting stripes and zones can be used to define areas even on the bathroom ceiling, creating the effect of a single space with finishes flowing from surface to surface. This way you can combine tiles of different sizes in one room: for example, a larger tile as a background and a mosaic as a contrasting accent. nine0003

Panel tiles

A patterned panel can be placed above the sink, on the floor, but most often the most visible wall in the room is chosen above the bath or shower. This is a kind of "picture" of tiles in the interior, and the rules for working with it are appropriate:

A mosaic panel in the interior of a room can become a real work of art. But remember that the best choice in this case is epoxy grout. It allows you to lay out curved seams, does not change color for decades, does not get dirty and does not give in to fungus and mold from moisture in the bathroom. It is not easy to work with her, and it is better to involve specialists in the work. nine0003

Diagonal laying

The method repeats the classical one in everything, but the laying direction is diagonal. It is easier to decorate the floor or accent sections of the bathroom wall, but not the entire surface - too many tiles will have to be cut.

Masonry

Offset pattern suitable for square and rectangular tiles, bathroom walls and floors. Win-win option: brickwork of white boar tiles.

Tile bricks are most often offset when laying up to mid-length, but this is not the only option: try brickwork with a third or quarter offset. The tile pattern will turn out to be more chaotic and unpredictable, but original. nine0003

Checkered

This variant is more suitable for laying on the bathroom floor: small squares in the corners are decorated with smaller squares in a contrasting color, sometimes the checks are framed by long narrow borders. The larger the tile format, the easier it is to make the pattern neat. The drawing is solemn, but somewhat old-fashioned.

Checkerboard

Checkered patterns can be made more original with color accents, imitating a checkerboard or even more complex patterns. The direction can be vertical, horizontal or diagonal. The method of laying tiles is suitable for walls and floors, but do not decorate the surface of a large area in the room so as not to tire your eyes with constant ripples at the periphery of vision. nine0003

Ways to lay tiles in the bathroom: ideas from designers

The main trend in tile laying: take the traditional way and add originality to it. Do not be afraid to experiment and try unusual and non-standard options that interior designers love so much.

Combined method

Absolutely all of the above methods can be combined and combined to make the interior of the bathroom more interesting, to highlight individual zones and elements. Be careful when calculating and laying tiles so that you do not have to cut too many tiles. For example, against the background of diagonal masonry, you can make a “brick” panel to emphasize the mirror area, and complement it with paint on the top of the wall and a “cage” on the floor. nine0003

Play with tile orientation

Lay the traditional "bricks" not horizontally, but vertically or diagonally. Or lay the tiles with the corners facing up to make “spikes” on the wall.

Checkered notebook

A simple but original way of laying ordinary light square tiles: the whole trick is in the contrasting seam against the background of light tiles. The mood of the bathroom can be set by color accents and individual tiles with decor. If you choose sharp contrasts, the interior will be more elegant, and neutral grout will help create a cohesive, versatile design. nine0003

Combining tiles with paint

When combining tiles with paint or plaster, use ceramic on the lower part of the walls where moisture damage is more likely. The laying height can be selected in two ways: