Shade for gazebo


Large Heavy Duty Outdoor Solar Shades

Product VideoMotorization DemoCrank Demo

Customized Outdoor Solar Shades for Spaces Up to 20 Feet Wide

Grande Solar Shades™ reduce heat, glare and fading of interior covered roof areas. These exterior transparent solar shades fit areas up to 20’ wide. Available crank operated or motorized, they come in 3 densities (or what we call “openness”) to customize the level of heat, glare and fade protection. Solar shade fabric is operable down to -20º F without cracking. They ride up and down on sturdy cable guides.

Crank Operated or Motorized

Withstands winds up to 35 mph
Identifying Wind Speed

Maximum dimensions:
20’w x 16′ h (240″w x 192″h)
Minimum Dimensions:
3′ w x 3’h (36″w x 36″h)

Choose Baby Grande Solar for smaller spaces

                

“Thank you for the heavy duty sun shade. It works great. I have to say that was one of the best constructed items I’ve seen in a very long time. The online instruction video was THE best I’ve ever seen. It only took my wife and I a few hours to have it installed and working. It was a pleasure dealing with everyone at North Solar Screen throughout the process. You have a great team, and a fantastic product.”

DAN WEIBLE, POINT, TX

Save 10%

On All Shade Purchases
No Order Minimum
Ends November 4, 2022

View All Outdoor Solar Shades

Call Now To Order

866-230-4700

We will guide you through the entire process

Motorization

Motorization Options

Standard Electrical Motors

General Info about XQ5 and Somfy Motors

5 Year Warranty

XQ5 Premium Motor Controls

5 Year Warranty

The XQ5 premium motor is our standard outdoor shade motor. These are radio controlled with built in radio receiver.  Best price point. If you need to reset the motor you will have to press a button on the motor head itself, so it’s not recommended for hard to reach areas.

Comes standard with an 8′ power cord (16′ or 32′ can be ordered). The power cord & plug come separate to cut to the appropriate length. XQ5 motor doesn’t have an antenna in the cord, so the cord can be cut as short as needed. It’s not recommended to put motors any closer together than 19″, instead place them on opposite ends.

Handheld Remotes: Smart Line

Wall Mounted Remotes: Dekora

Slim Line Timers

Sun & Wind Sensor

Wind Sensor

RollApp Hub: Control Shades with Wifi

Somfy Motor Controls

5 Year Warranty

Somfy is our upgraded motor, and is more expensive than our standard XQ5 Motor. Somfy motors can be reset from the remote, so it’s a better fit for hard to reach shades & second story applications. With the Somfy TaHoma™ shade motors can pair with a wide range of home automation systems.

Comes standard with a 9’ power cord (24′ can be ordered). Power cords & plugs come separate to cut to the appropriate length. Do not cut motor wires shorter than 18” as you will cut the antenna and seriously reduce the range of the remote. Motors can be butted up to share an outlet.

Hand Held Remotes

Wireless Wall Switch

Timer & Remote

Sun & Wind Sensor

Rain & Sun Sensor

Somfy TaHoma™: Home Automation with Smartphone App

(App is free, but you must purchase the TaHoma™ transmitter)

NEW!  Solar Powered Motorization

HELIOS Solar Motor System

3 Year Warranty

External Mounted Helios System

Solar station can mount externally up to 40″ away from the shade. Good for exposed roller shades (no housing box) or for low light areas.

View external solar station mounting options*

Dimensions of External Mount Bracket: Width – 3 5/8″, Height – 2”, sticks out about 2 3/8″

*Reset button sits on solar station, plan mounting accordingly to access button in rare case of motor failure

Box Mounted Helios System

The box mounted Helios system can be mounted directly onto the housing box*. For low light areas try the externally mounted bracket system.

Dimensions of solar panel: 24″ x 4″ x 1 1/4″

*Box mounted stations and motors can only be mounted on the right side of the shade

Helios Remotes

External Mounted Solar Station

Box Mounted Solar Station

Construction

Grande Heavy Duty Construction

An outdoor shade should be retracted in windy conditions. Grande Shades have a 35 mph wind rating. Subjecting them to maximum wind load on a regular basis will cause them to wear out faster.  Better to upgrade to the Citadel High Wind Zipper Track Shades. Shades must be mounted to the underside of a beam/ceiling or to the face of a beam/wall, and cannot be ‘end mounted.’  Installing within 3 miles of salt water is considered salty air and changes the

warrantyon metal parts, not the fabric or motors.

  1. Rollers: 3 ¼” in diameter to prevent sagging of shades even 20′ wide.
  2. Splines: Fabric is secured to the roller with a sturdy spline that runs the full width of the shade and is permanently affixed to the fabric so that it cannot slide out.
  3. Fabric Cutbacks – The shade material is cut narrower than the roller: Exposed Roller-Crank, Housing Box-Crank, Housing Box-Motorized, Solar Motor with Housing, Solar Motor Exposed RollerExposed Roller-Motorized (only for shades completely protected from weather).
  4. Metal components are made of corrosion resistant materials (powder coated aluminum, powder coated steel, stainless steel, or galvanized steel. If you are close to the sea “with salt air smog” where you can actually taste the salt air, spray off the cables, bottom bars, and all metal parts as you would ocean going boats, even the stainless-steel ones.
  5. Weight bar: Polished marine grade stainless steel tubing 7/8” diameter with internal steel rod for extra weight. Hardened steel eyelets run up and down the stainless steel aircraft cable. This holds the shade in place without the need for tie down loops and is the preferred method of securing the shade in the wind. Cables come either 12′ or 16′ long. Let us know if you need them longer. Cable system should be mounted to the concrete floor with provided tie wire drives (cable anchors.)
    1. External Bottom Bar Upgrade: Instead of the standard stainless steel bar, we recommend external bottom bar for areas with very salty air and little to no rain. Available in four colors, either round or square exterior bottom bar. **Ordering this part may add to the production time**
  6. Cable Guide System: Shades ride up and down on sturdy cable guides which mount into the ground or onto a wall mounted cable bracket.
    1. Low Profile Adjuster (Standard Equipment): Securely attached to the bracket or housing box, this low profile hardware tensions the stainless steel aircraft cables. Shade can be lowered to about 2 ½” from the floor. Swivel eyelets to reduce wear on cables and to allow cables to be mounted at a slight angle. Mount into stone, concrete, or wood with supplied cable anchor. When fully retracted, there will be 2” of shade fabric/weight bar that will still hang below the housing or bracket.) Cut cables to fit on site and secure to tie wire drive or eye bolt with the Simplex Cable Fastener
    2. Wall Mount Cable Bracket (Optional Upgrade): Use if you need to mount the cable to the wall or post. Allows the shade to come down within 1 ¾” from where you mount it. Bracket protrudes 1″ from the mounting point, holds cable 3/4″ from the mounting point and is 2.5″ tall (including the nut & threads from the eyebolt). Bracket dimensions are 2″ h x 1″ w x 1″ d. Powder coated to match your housing box or shade brackets.
  7. Housing Box: Powder coated extruded aluminum housings available in 8 colors. Used to hide and protect the roll (especially when motorizing). 5 ½” wide x 5 ½” tall
  8. Crank Brackets: ‘Exposed Roll’ shades (with no housing) mount on sturdy brackets. Hardware is available in White, Dark Brown, or Desert Sand. Choice of crank gear side.  Foot print of bracket is 3” x 4 ½”. Shade bracket protrudes from wall approximately 4 ½”.
  9. Hand Brace: Each crank operated shade ORDER comes with ONE free properly sized hand brace. Move the hand brace from shade to shade to operate them. Comes in your choice of 3 colors. Available in 48″, 60″, 72″, 84″ and 96″ long, you may order extras for convenience. We recommend the top of the shade not be more than 136” from from where you are standing for crank operated.
  10. You will need to supply your own Torx Screws for mounting your shades.

Overlapping Openings: If you want to overlap the opening it’s better to mount to the interior facing side so the force of the wind blows the shade fabric inward. You should still be cautious of the fabric rubbing against rough or solid surfaces. If you prefer to mount to the exterior side and overlap solid or rough surfaces, we recommend shimming out your brackets or housing box at least 2” to help alleviate potential fraying or premature wearing out of the material. If your header and sides are completely level we can also make the shade fabric the size of your opening width minus ½” to make up for irregularities. This covers your opening and minimizes the chance of damage to the material. Damage to the fabric or failure of the bottom pocket weld are not covered by warranty if you install with the fabric overlapping a solid surface (posts, walls, window frames, etc.).

How To Measure

How To Measure Outdoor Shades

Measuring Tips:

Always feel free to call us for help and email us photos of where you want to install.

Opening Width

Measure Width (inches): Measure width at the top, middle and bottom. Give the narrowest dimension especially between any protruding trim, bolts etc

Please note: we don’t recommend overlapping fabric over columns when mounting from the exterior side of your structure as the wind could cause the shade to rub and wear out the fabric.

Opening Height

Measure Height (inches): Measure height from the top face or underside of the header beam to where you want the shade to drop.

For Crank operated shades we will also need to know the height from the ground to properly size a hand brace

How To Mount

Mounting Options

For more detailed installation instructions see our installation tab

Surface Mount (Face Mount)

The shade mounts to the surface or face above your opening on the interior or exterior of your structure

Minimum Height Required: 5 1/2” above opening*

Undermount (Ceiling Mount)

The shade mounts from the top down inside the frame of your structure.

Minimum Depth Required: 5 1/2″.

Must be flat, level and have no protrusions (trim or bolts) within your opening frame.

The housing box and bottom bar will be in your line of vision when shade is rolled up. Housing box is 5 1/2″ tall and bottom bar hangs down 2″ (see diagram below).

The bottom bar hangs below the housing box 2″ when shade is rolled all the way up

The housing box must to be mounted to a sound structure. Holes need to be drilled 2” from each end using two fasteners per side.

Mounting The Cables

Grande Shades ™ use a sturdy cable guide system that allow the shade to be positioned at any desired height without the need for tie downs.

These cables keep the shades wind worthy in gusts up to 35 mph.

Cables run plumb from the top of the shade to the bottom mount. 

Floor mounted stainless steel cables come standard with your order, or you can upgrade to wall mounted cables.

**Solar shades CANNOT be mounted CLOSER THAN 2 FEET from a heat source**

Free Samples

Solar shades provide daytime privacy only. If you need nighttime privacy try the Blackout Grande material.

Darker colors provide sharper outward visibility and more heat rejection (outdoors only) than lighter colors.

Lighter colors allow in more natural light. The 3% and 5% openness are best for early morning and late afternoon blinding sun.

View Seam Information

Pricing & Ordering

Install Videos/PDFs

Installation Videos

Housing Box, Crank Operated

Exposed Roller, Crank Operated

Motorized with Housing Box

Exposed Roll, Motorized

Helios Solar Motor

Sun & Wind Sensor Programming

Complete Installation PDFs

Please print or download for your needs. Instructions no longer included in packaging.

Motor Programming/Wiring PDFs & Videos

XQ5 Premium Motor

XQ5 Motor Programming Videos

Emitto 16 channel Timer Remote

XQ5 Initial set up, pairing the remote, setting the limits

XQ5 Reset motor memory

XQ5 Add additional remote

XQ5 Change direction of rotation

XQ5 Set intermediate position

Somfy Motor

   TAHOMA® Programming Guide

Helios Solar Motor

Schematics (Tech Information) PDFs

Repair/Replace PDFs

Woman owned and operated.
Designing Energy Saving Shades since 1992

Boyel Living® Online Store | Furniture, Shower Faucets, Outdoor...

Sale Sale Sale Sale

Shower Head Systems

Sink Faucets

Bathtub Faucets

Bathtub

Recliners

Livingroom Sofas

Dining Room Furniture

Canopies & Gazebos

Patio Furniture Sets

Appliances

Buyers' Show Call

Get 15% off on your next purchase by sharing images of our products on social media, like Instagram, Facebook, Pinterest, etc.
@Boyel Living and #boyellivingbuyershow

Post Now

Freebies Event

Buy any of our bathroom products: shower set, sink faucet, bathtub, bathroom vanity. .. Order amount to meet certain conditions to get a free shower head, up to 3 for 1 order!

Shop Now

Installation Videos

Professional 3D installation videos to give you a better understanding of our products, including shower systems, freestanding bathtub faucets...

Watch Now

Buyers' Show Call

Get 15% off on your next purchase by sharing images of our products on social media, like Instagram, Facebook, Pinterest, etc.
@Boyel Living and #boyellivingbuyershow

Post Now

Freebies Event

Buy any of our bathroom products: shower set, sink faucet, bathtub, bathroom vanity... Order amount to meet certain conditions to get a free shower head, up to 3 for 1 order!

Shop Now

Installation Videos

Professional 3D installation videos to give you a better understanding of our products, including shower systems, freestanding bathtub faucets. ..

Watch Now

Testimonials From Our Customers

16 ways to create shade on a hot afternoon

Consider the most stylish ways to hide from the sun: awnings, visors, umbrellas, etc

Go to
gallery

Publication date: 17. 07.2017

Text: Olga Doroshchenkova

Photo: press services

Finally, we waited for the heat. The long-awaited vacation has come and we are inevitably drawn to nature. Of course, when we get there, we have to face the inexorable heat of the July sun. You have to choose between the shade of the house or the heat of the lawn. No wonder humanity has invented various gazebos, visors and umbrellas. In a word, what allows us to be protected from the sun in nature. So, we present you a selection of new products in this area.

1. Hammock from Affari

Brand: Affari

Settle down with a book under a sprawling tree. And a good rest is guaranteed to you.

2. Deck chair and umbrella by Atmosphera

Brand: Atmosphera

Or you can not philosophize and immediately use the Atmosphera brand kit. Chaise longue and umbrella in white, harmoniously complementing each other.

3. Arbor Equinox Cabana

Brand: Tuuci

The modular structure of the Tuuci Equinox Cabana arbor allows you to vary the shading to suit your taste. Various options for roofs, pergola walls, curtains and even floors will allow you to choose for yourself exactly what you need.

4. Pix poufs

Brand: Pix

Arper's Pix outdoor puffs by Ichiro Iwasaki are convenient because they're portable and can be placed in any shade.

5. Sofa by B&B Italia

Brand: B&B Italia

You will love the canopy sofa in B&B Italia lightweight fabric! The seat has a swivel base that rotates 360°. And the canopy reduces UV radiation by up to 92% as sunlight passes through.

6. Umbrella XXL

Brand: Jab

And you can pick up an umbrella of such a size that the whole family can dine under it.

7. Sunshields

Brand: Ethimo

The Ethimo factory has created a collection of special costra sunscreens. Made of aluminum and teak, they are light and mobile. The silhouette of the tree can be complemented by a flower box at the base. You can also use these "trees" as modules and form a small forest.

8. Veranda chair

Brand: Sanderson

Another great way to avoid the heat is to put a comfortable chair on the veranda with a pergola.

9. Garden gazebo

Brand: Samuele Mazza

Samuele Mazza made a large and at the same time elegant dome-type Sole garden arbor. It allows you to create a large area of ​​​​shadow, which can accommodate an entire company. Agree, a great idea for a party, isn't it?

10. Hooded sofa

Brand: Samuele Mazza

You can also shade the sofa with a special hood made of mesh straw. Soft armrests will make you relax all day long. Designed by Samuele Mazza, Altair collection.

11. Sun lounger with a hood

Brand: Visionnaire

If you want to take a sunbath, sunbathe and relax, and the sun interferes with your eyes, you can only shade the upper part of the sun lounger. The elegant hood will not let you overheat.

12. Modular veranda

Brand: Paola Lenti

By the way, Paola Lenti makes wonderful modular verandas. And this is a great option for a mobile summer room. It is possible to equip with panoramic windows.

13. Chaise longue shell

Brand: Vondom

Factory Vondom has made a chaise longue where you can have your own private shaded environment. The canopy can be removed if desired. However, no one usually has such a desire due to the special comfort of this deck chair.

14. Orangerie

Hotel Domaine d’Ablon

An ordinary greenhouse can become an excellent non-standard solution to the problem of sun exposure. See how masterfully it is performed at the Domaine d'Ablon. Just imagine the chairs and coffee table in this greenhouse.

15. Outdoor chairs Fast

Brand: Fast

Fast outdoor chairs look great under a green tunnel of pergolas entwined with wild grapes. Greenery is considered the most reliable source of shade on a hot day.

16. Multifunctional gazebo

Brand: Exteta

Exteta is also in the business of accustoming us to modular construction. Anyone who likes to collect Lego with children will love this gazebo-canopy-room. And many, many more features. Which you yourself come up with. Of course. It is also suitable for receiving guests in the garden: both morning tea drinking and noisy parties.

Advertising on SALON.ru

You may like these articles:

How to decorate a living room with a fireplace: 6 designers' opinions

What to look for when choosing a fireplace and what to consider when installing it - the pros explain.

#Interior #Living rooms

What a fun classic looks like: a house with an area of ​​almost 1,500 sq. m

Rare table, Russian stove, modern art and lots of color: designer Elena Svarin came up with such a boring classic interior.

#Interior #Houses #Neoclassical #Moscow

Ergonomic mix: an interior for a young Petersburger

The author of the project, Marina Bzhitskikh, combined a traditional approach with up-to-date design ideas in this interior.

#Interior #Apartments #Eclectic #St. Petersburg

The most beautiful table of this fall is the novelty De Castelli

The Italian factory working with bespoke metal has presented a spectacular novelty.

#News

Get the most popular articles by email.

Subscribe so you don't miss anything. You can unsubscribe at any time.

Email:

By clicking on the "Subscribe" button, I consent to the processing of personal data.

5 budget ideas for creating shade on the site (and no sun!)

No time to read? Watch the video!

1 Canopy under a tree

A very beautiful and stylish place to relax can be made by buying a few meters of light-colored fabric. Sew a canopy of suitable length from it to fix it on a branch, and at the same time the fabric reached the ground. All you have to do is lay a blanket or carpet under the tree, fasten the edges of the canopy around the perimeter of your recreation area with some weights and enjoy the shade. If you use tulle, under such a canopy it will not be stuffy and dark. In addition, it is a good protection against mosquitoes.

Decorate the canopy to match the style of the house, garden furniture and plants around. Multi-colored cushions to sit on and handmade fabric garlands will do.

Instagram: @zubko_deco

Instagram: @zubko_deco

Instagram: @zubko_deco

2 Climbing plants

Not a quick, but very beautiful and environmentally friendly way to create shade in the garden is to use climbing plants. You can stick several beams into the ground, connecting their tops with a fishing line. Plant ivy, roses or grapes at the base, they will grow, clinging first to the beams, and then to the fishing lines. Ivy grows faster than grapes, and in a year, under suitable conditions, it will spread from beam to beam, forming a green arbor with a good thick shadow.

You can stretch the lines, for example, from the house, garage or shed to the ground, then the green wall will be flat. Also, such plants are planted at the base of an already built gazebo, if it does not give enough shade.

ShutterStock

Instagram: @n_n_i_k_o_l_a_y

3 Tall Plant Fence

You can add shade to your property with a tall fence. To do this, it is not necessary to build a fence, you can again resort to the help of plants. There are several inexpensive and fast growing shrubs that are planted around the perimeter if they want to quickly grow a dense and tall green hedge.

Suitable shrubs

Every spring, before the leaves appear, prune the branches to give the hedge a strict shape and prevent it from growing in breadth. In addition, regular shearing will make the hedge thicker.

Instagram: @kenigplants

Instagram: @kenigplants

4 Do-it-yourself gazebo

In order to build a gazebo with a roof, you need a lot of material and certain building skills. But you can go in a simpler and more economical way: assemble a frame from eight load-bearing beams. Further, a roof made of dense fabric is stretched between the beams. To do this, you can use fishing lines, curtain rods or thin boards, laying them crosswise.


Learn more