Home » Misc » How to clean floor tile grout in bathroom

How to clean floor tile grout in bathroom


How To Clean Tile And Grout

How To Clean Tile And Grout

;

Multiple Locations provide service near you.

Please make a selection

Multiple Locations

Please select a location.

Changing locations will reset your order. Continue?

Forgot your password?

Enter your email address to get instructions on how to retrieve your password.

Email Address

Forgot Email Oops! You must complete the highlighted email field above with a valid email address.

Invalid email address or password. If you have forgotten your password, please use the "Forgot your password?" option

Forgot password

Thank You. An email has been sent to the address you entered with instructions for resetting your password. If you don’t receive this email shortly, please check your junk or spam folder.

Find Your Stanley Steemer

Address Enter a valid address.

City City Enter a valid city.

State

State StateAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict Of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyoming

Enter a valid state.

Use My Current Location

Multiple Locations provide service near you.

Please make a selection

Location

Location

Please select a location.

Find Your Stanley Steemer

City City Enter a valid city.

State

State AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareDistrict Of ColumbiaFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusettsMichiganMinnesotaMississippiMissouriMontanaNebraskaNevadaNew HampshireNew JerseyNew MexicoNew YorkNorth CarolinaNorth DakotaOhioOklahomaOregonPennsylvaniaRhode IslandSouth CarolinaSouth DakotaTennesseeTexasUtahVermontVirginiaWashingtonWest VirginiaWisconsinWyoming

Enter a valid state.

Address Enter a valid address.

Use My Current Location

How To Clean Tile And Grout

backBACK

Tile and grout in your home collects dirt fast because grout is porous and easily discolors. You may not even know the original color of your grout due to how quickly dirt can get into your grout. Tile and grout cleaning can be done with just some cleaning agents you have at home!

The best way to clean tile floors is by using a neutral tile floor cleaner; however, if you have dish soap and water, you can make your own tile floor cleaner. Cleaning tile floors requires just six steps:

How to Clean Tile

  1. Sweep to remove all lose dirt.
  2. Use a manufactured cleaner of choice or create a natural tile cleaning solution by using hot, soapy water with dish soap.
  3. Use a sponge mop or towel to apply cleaning solution.
  4. Allow it to set for 1-3 minutes.
  5. Remove dirt with a damp sponge mop or towel.
  6. Allow floor to dry.

An easy way to clean grout is by creating a mixture of cleaning agents that you probably already have in your home. We recommend avoiding bleach and other harsh chemical cleaners that might break down the grout and sealants. The best way to clean grout is to use a neutral tile cleaner, that’s what we use to professionally clean tile and grout floors. However, grout cleaning can be done with cleaning agents you have at home:

What to Use to Clean Grout

  1. Baking soda
  2. Hydrogen peroxide
  3. Dish soap
  4. Spoon
  5. Scrubbing tool
  6. Towel
  7. Hot water

How to Clean Grout

Here's how to clean tile grout with the instructions below:

  1. Remove surface dirt with hot water and a towel.
  2. Mix together ½ cup baking soda, ¼ cup hydrogen peroxide, 1 tsp dish soap.
  3. Spoon cleaning agents onto grout and let sit for 5-10 minutes.
  4. Scrub the grout lines with a brush. Grout cleaning tip: Make sure to scrub hard to agitate the grout and cleaning solution and break up any really stuck dirt.
  5. Wipe clean.

Cleaning tile and grout floors yourself is mandatory in order to maintain a clean home; however, Stanley Steemer can deep clean and remove so much more by using our state-of-the-art cleaning equipment. We use a three-step tile and grout cleaning process to examine, scrub and clean your floors, removing 96.5% of common household allergens. We start by examining your floor, making sure we use the appropriate cleaning method. It’s important to find any places where tile or grout is damaged. Then, we use a pH-balanced cleaning solution to scrub grout lines and remove stubborn dirt or stains.

Next, we use a state-of-the-art, hot-water extracting machine to clean your tile floors. Stanley Steemer specializes in a restorative grout sealing and coloring process to revitalize the grout in your home. Our color seal cleaning solution protects and recolors your grout to make it like new. Color and clear sealing creates a protective barrier that helps keep stains out of porous grout.

Get a free tile and grout cleaning quote for your home.

8 Super Effective Methods for Cleaning Grout

Photo: istockphoto.com

Tile is beautiful, durable, and generally easy to clean, but cleaning grout? That’s a different story. Because it’s typically light-colored and has a porous composition, grout is prone to staining. In a tiled entryway or mudroom, dirt and grime are the usual culprits but in the kitchen, spills are more likely to blame. In the bathroom, homeowners must contend with grout that’s marred by mold and mildew.

The good news is that the best way to clean grout doesn’t come with a big price tag. It’s possible to clean and restore your grout using common household products and of course, a bit of elbow grease.

Before you get started on your grout-cleaning endeavors, understand that it is best to begin with the first cleaning option on this list, which is the mildest, least harmful method. If that doesn’t work, you can work your way up to incrementally more intense, odiferous, and potentially time-consuming options on this list. If you’re in doubt about whether a particular grout cleaner is suitable for your surface, test it in a hidden spot first—under an appliance in the kitchen, say, or behind the toilet in the bathroom. 

Tools & Materials

Before you begin cleaning, it’s important to understand the different types of grout.

There are several types of grout, and most types come in multiple colors. It’s important to take both type and hue into consideration before you start gathering cleaning supplies and making a cleaning plan. The two most common types of grout these days are traditional cement grout and the newer standard, epoxy grout. These grout types can be further broken down as follows:

Advertisement

Some types of grout are precolored and are as a result better able to resist stains and fading. There are also grout formulations that add polymers to provide helpful features such as moisture and mildew resistance. Finally, as you’re figuring out how best to clean your grout, it’s important to know whether the grout has been sealed, or possibly needs resealing. This might affect both how well the grout holds up and what solutions you can use to clean it.

Advertisement

istockphoto.com

1. Scrub dirty grout using warm water and a medium-bristle brush.

If you don’t already have a grout scrubber, most home centers and hardware stores carry a number of products that are specifically designed for the purpose of cleaning tile grout. To avoid damaging the grout, opt for a medium-bristle nylon brush, not a hard steel one. Simply spray warm water on the grout lines and scrub in a circular motion, then let it dry. Don’t use too much water or let it sit on the grout for too long. Remember: Porous cement grouts absorb water, which could lead to mildew.

2. Spray grout with equal parts vinegar and warm water.

If you know your grout has been sealed but it has accumulated heavy dirt or mild stains, turn to vinegar, that trusty old household staple. Fill a spray bottle with a half-and-half solution of vinegar and warm water. Spray the mixture on the grout, let it stand for 5 minutes, then scrub the surface with a stiff brush. Avoid using vinegar on unsealed grout.

3. Apply a baking soda paste and then spray with vinegar.

Cleaning grout with baking soda will bring even more power to the party. Here’s what to do: Cover grout lines with a paste of baking soda and water, then spray on the vinegar solution listed above (remember, only apply vinegar if the grout has been sealed). Once the mixture stops foaming, scrub with a brush, rinse with plain water, and wipe dry. If the grout is unsealed or needs resealing, apply just the baking soda solution and scrub carefully.

istockphoto.com

4. Pour on some hydrogen peroxide.

Moderate stains may require you to use hydrogen peroxide, which is available in most drug stores. You can use the product straight or as part of a homemade grout-cleaning paste of baking soda and hydrogen peroxide. This mixture is typically safe for both sealed and unsealed grout.

Advertisement

5. Apply oxygen bleach and let it stand for up to 15 minutes.

For tougher stains on really grimy white grout, use oxygen bleach as a grout cleaner. You’ll find this cleanser is most often sold in powdered form; bestselling brands include OxiClean and Biokleen Oxygen Bleach Plus.

Before using oxygen bleach to clean grout, make sure the room is well ventilated, and then carefully read and follow the manufacturer’s directions for application. Let the oxygen bleach solution soak in for 10 or 15 minutes before rinsing. Always rinse with clean water and then wipe the area dry so that the dirt doesn’t resettle into the grout lines.

6. Try a commercial grout stain remover.

Applying one of the best grout cleaners on the market could make quick work of removing mold and mildew and restoring bright white grout lines. These products work in one of two ways: (1) spray and wipe, or (2) scour with a brush. Spray-on products claim to work without scrubbing. Though they save time and energy, they may contain harsher acids, solvents, or chlorine bleach.

Scouring with a soft brush and cleaner does require a little work, but this method can be especially effective on floors and heavily soiled grout. Before you begin using one of these products, read the active ingredients carefully, and heed the instructions—particularly the safety precautions.

7. Steam-clean the worst of grout stains.

The best steam mops are effective and environmentally friendly tools for cleaning grout—or, for that matter, many hard surfaces throughout the house. Bissell, Oreck, and Hoover all make steam cleaners for residential use.

istockphoto.com

8. Use chlorine bleach sparingly on grout.

Chlorine bleach and commercial cleansers containing chlorine bleach can be used sparingly in extreme cases to clean grout. It’s not a great idea to use them as your go-to grout cleaners because long-term use of caustic cleaners will erode grout. When all else fails, however, a bleach product such as Clorox Clean-Up might be effective.

Advertisement

If you’ve tried any or all of the above methods before you apply chlorine bleach, be sure to rinse the surface completely before proceeding with any chlorine bleach products. This is especially true of vinegar, because traces of vinegar mixed with bleach will emit a highly toxic chlorine gas into the air.

Grout Maintenance

Once you’re finished cleaning your grout, spray it with household vinegar or a mild grout cleaner and wipe it down once a week to keep it stain-free. Wiping grout with rubbing alcohol will also keep mold and mildew at bay. In any case, just a few spritzes and wipes a week can save you a lot of time and effort cleaning and help you preserve the attractive appearance of your tiled surfaces.

Final Thoughts

Cleaning grout begins with good prevention, including resealing the grout as needed, cleaning up kitchen spills right away, and using a mild homemade or commercial grout cleaner regularly. Once grout begins to look stained or dingy, refer to the steps above. An important reminder about how to clean grout is to start with the mildest approach because this will be the least likely to damage or discolor grout. If the grout stain persists, move on to progressively more intense methods. Always ensure adequate ventilation and wear rubber or nylon gloves when cleaning grout.

Finally, be sure to keep grout sealed and maintained according to your tiling professional’s or manufacturer’s recommendation, and avoid harsh cleansers or scrubbers if the tile and grout are prone to damage. Keeping grout clean and sealed beats having to paint, repair, or regrout it.

FAQs About Cleaning Grout

The methods outlined above range from the easiest way to clean grout up to more powerful approaches for more stubborn stains. If you still have questions about maintaining and cleaning tile grout, read on for answers to common concerns.

Advertisement

Q: Does Magic Eraser work on grout?

A Magic Eraser and a little warm water can remove residue from the surface of tiles and could be a simple addition to your regular grout-cleaning routine. In particular, regular wiping with a dampened Magic Eraser sponge can remove some of the gray surface on white grout. For heavier stains, you may want to choose it as your first scrubbing option instead of a brush or soft cloth, then progress to something tougher if needed.

Q: Can I use OxiClean to clean grout?

Although OxiClean is called “oxygen bleach,” it is actually made of a combination of dry hydrogen peroxide and sodium carbonate, which is similar to baking soda. It is less toxic to the environment and more color-safe than bleach.

Powdered OxiClean is safe for use on grout when mixed with water to form a liquid or paste and applied with a cloth, sponge, or grout scrubber. Give the solution from 5 to 30 minutes to sit on the grout before scrubbing away and rinsing.

Q: Can you use steel wool on grout?

Do not use steel wool on grout. While the abrasive pad might scrub away the stain, it could also take some of the grout along with it. Plus, steel wool can scratch the tile surrounding the grout joint. Opt instead for a soft sponge or nylon bristle brush, maybe even one mounted on a power scrubber, always starting with the least abrasive material first.

Find trusted local pros for any home project

Find Pros Now

+

How to clean the seams between the tiles on the floor and what to clean from dirt

Ceramic tiles have been used as a facing material for rooms since the time of the Persian Empire. Attractive appearance, durability, ease of maintenance of cleanliness of ceramic surfaces - this is not a complete list of the advantages of the material. However, time is inexorable and gradually dark stains of pollution appear in the sparkling beauty of the coating of walls, floors, and sometimes ceilings. Sometimes cleaning the seams between the tiles on the floor is not only difficult, but almost impossible. But only until a suitable remedy is found that allows you to scrub and wash even old dirt and grease, making the tile shine. It can be either a universal homemade recipe from the time of "our grandmothers" or a modern, innovative cleaning agent.

Causes of soiling and discolouration of tile joints

The only known way to keep ceramic tiles and grouts perfectly clean is not to use rooms where they are used as a finish. In all other cases, the operation of coatings and exposure to aggressive environments cause their natural aging and contamination.

Tiles in the hallway are affected by all types of dirt and soil: clay, sand, black soil, brought into the room with shoes. Not a single seam will last!

In showers and bathrooms, an atmosphere saturated with water vapor and lack of ventilation contribute to the accelerated development of fungal, mold and other microorganisms, which, having settled in tile joints, lead to their blackening, and the use of modern cosmetic and hygiene products no less successfully contributes to the accumulation of dirt .

Tiles on floors and walls in the working area of ​​the kitchen are contaminated with fats, oils, food waste. In the kitchen, the most difficult thing is to wash the seams between the tiles on the floor.

The beginning of the accumulation of mud deposits in the seams can be laid even when laying tiles, when the technology of tiling was not observed, namely:

No less important are some operational aspects, or rather the absence of a number of factors:

All three indicators must be present without fail. In the case of the last point regarding timely care, one should take into account the fact that the initial pollution is an excellent environment for the development of fungi and mold.

Important! The effort spent on cleaning tile joints after they are dirty always exceeds the cost of maintaining cleanliness. Good ventilation of the premises, a sufficient level of heat (heating), regular maintenance of ceramic surfaces using special “cosmetics” for tiles and joints will preserve their original freshness and beauty.

How to clean the joints between tiles on the floor

If, with all efforts, it was not possible to save the grout between the tiles, and its original color has changed beyond recognition, you will have to renew the tile using different means.

Slight grease stains, smudges from the use of detergents, light limescale, darkening of the grout color are easily removed with degreasers - CIF, Silit, Fairy. The presence of signs of mold, the appearance of fungus will require the use of liquids, which include chlorine. A good result will provide Domestos or Whiteness. The method of their application is simple: apply to the surface of the seam and rinse with water after 5 minutes. The best results for all types of dirt are given by products specially designed for cleaning tile joints. Available ones include BOZO, Ultra-Stripper, Sif and their analogues.

Small stain removed with waterproof dye marker. The agent is powerless against mold. Another way to get rid of simple dirt is a melamine sponge. Despite the high cost, its use justifies itself. In addition, it allows you to clean any light surfaces, including household appliances, easily removing stains. The main thing is to wash off its remnants well, as it crumbles. It also does not hurt to rub the surface well to a shine, since not a single divorce will decorate it, and after the sponge there are many stains.

Rather than washing the tiles on the floor with ordinary water, and then suffering because of their unsightly appearance, it is better to immediately take care of their beauty using professional cosmetics.

Cleaning methods

Tiles and tile joints can be cleaned not only with different means, but also in different ways, depending on the degree and type of contamination. It is important to know not only how to wash the tiles on the floor so that there are no stains, but also how to get rid of grease, dirt and tile adhesive.

Manual mechanical cleaning

Simple, effective, but time-consuming method. Allows to remove pollution of tile seams by mechanical processing. Depending on the degree and depth of damage to the seam with dirt, it is used in the following cases:

Manual mechanical cleaning should be used carefully. The main thing is not to overdo it and not erase the grout completely, because then it will have to be completely changed. Otherwise, this is better than cleaning the tiles on the floor from stubborn dirt, you can quickly and efficiently.

Household chemicals

The achievements of modern chemistry are enormous, and if the use of the means listed above did not give results, this does not mean that the situation has reached a dead end. Household chemical stores offer a wide range of tile cleaners.

The choice is up to the user, who can make it based on the degree and nature of the contamination.

Selection guide:

Steam cleaner (steam generator)

Modern technologies make their own adjustments in the technology of cleaning ceramic surfaces. The use of a device that generates high-pressure steam for processing joints between ceramic tiles will allow you to easily cope with all types of pollution, get rid of bacteria, kill fungus and destroy mold.

A pleasant feature of its use is the absence of dried mud smudges and stains, maintaining the integrity and structure of the grout. With a steam cleaner, you don't have to worry about how to remove old adhesive from ceramic tiles.

Folk methods, ways, recipes

The experience of grandmothers, friends and neighbors, accumulated over decades of persistent struggle with dirt in tile joints, often helps out in difficult times. We offer a list of the most popular and effective recipes with which the question of how to clean ceramic tiles from tile adhesive, grease, dirt, stains will be removed along with dirt.

Blend #1 (lemon juice, baking soda, vinegar)

Cooking sequence:

  1. Pour 1.5 liters of boiled water (20°C) into a container.
  2. Add the juice of half a small lemon, half a cup of baking soda, a quarter cup of vinegar (9%).
  3. Stir with caution, since as a result of the combination of the components, a violent reaction is observed, accompanied by the release of foam.
  4. The agent is applied to the contaminated surface of the seams by rubbing.
  5. Work with a hard-sided dish sponge or an old toothbrush.
  6. After 20-25 minutes, the solution is washed off with water and wiped with a rag.
  7. Evaluation of the result, which will then depend on the degree of contamination.

Recommendation: Lemon juice can be replaced with citric acid (crystals).

Important! You can only work with rubber gloves!

Blend #2 (bleach, soda)

Only suitable for cleaning joints with white grout! Contains chlorine, therefore it is allowed to work only with rubber gloves and a respirator (gauze bandage).

To prepare the solution, it is recommended to use whiteness household bleach and ordinary baking soda.

Cooking method:

  1. Focusing on the total area of ​​​​the seams to be cleaned, pour bleach into the container for preparing the mixture and, gradually stirring, add soda until the mixture acquires the density of sour cream.
  2. Apply the finished mixture to the seams with a spatula and leave to dry completely.
  3. Use a kitchen sponge or brush to wash off the residue of the mixture and clean the seams.
  4. The agent perfectly copes with mold and clarification of seams.

Mix #3 (Baking Soda, Mustard, Lemon, Baking Soda, Tooth Powder)

For 1 liter of water you will need the following ingredients:

Combine all components in a container and mix thoroughly. The resulting mixture rubs the contaminated seams (a sponge is used). Leave for half an hour, then wash off with warm water.

Ammonia solution (ammonia)

The simplest and most effective fresh mould. It is also a good antimicrobial agent. We prepare a solution of 2 liters of water and a tablespoon of ammonia. It is sprayed with a sprayer over the entire surface of the tiles and joints. After 20-25 minutes, the tile is wiped from the remnants of the mixture and dirt.

Radical methods

In particularly difficult cases, when the damage to tile joints by mold or fungus has gone so far that neither professional nor folk remedies help, there are only two options left:

  1. Completely remove old tiles, treat surfaces with antifungal agents and lay new tiles in compliance with all technologies;
  2. Remove all grout from infected joints, treat with anti-fungal agent, grout the joints with fresh grout, cover with a protective layer to prevent re-infection.

Both in the first and in the second case, it makes sense to use the services of professional tilers. Pleasure is not cheap, but the result is guaranteed. The main thing is to control the removal of the adhesive, so that later you do not suffer how to remove the old tile adhesive from the tile.

If this is not possible, and only the second option is available for independent execution, we recommend that you consider the following tips:

Useful information

Performing tile grouting work and choosing the right products to achieve the best results requires knowledge and understanding of the characteristics of each type of tile.

In order not to wonder how to clean the grouts quickly or how to remove the adhesive from the tiles, it is better to do it right away. Not a single remedy will give an instant desired result.

Seam protection against soiling

Having determined the degree of pollution, having chosen a cleaning agent suitable for solving the problem, having successfully applied it, you should perform some more actions aimed at maintaining the achieved result. To preserve the appearance of grouting tiles and extend its service life, protective solutions are used, for example, Atlas Dolphin or similar. The application of such coatings in the future greatly facilitates the care of the surface and protects the grout. Working with protective fluids requires care and precision. Do not allow the solution to get on the tile. To apply protection, use a thin brush. The application of a protective coating does not eliminate the need for regular care, and the use of professional care products will prolong the “youth” of the grout for many years.

The use of all the above methods and means of cleaning seams does not require special training and high qualifications. All that is required is patience, calmness and accuracy. Do-it-yourself work will not only save a tangible part of the home budget, but also give self-confidence.

how and how to wash tile joints in the bathroom or in the kitchen, features of cleaning with folk remedies

The aesthetic component in interior design is extremely important. Therefore, they choose not only a beautiful coating, but also practical, in terms of cleaning. How to clean the seams between the tiles in the bathroom to whiteness is known to both craftsmen and manufacturers of special products.

To give the tile an aesthetic appearance, it is necessary to clean the spaces between the tiles.

Causes of soiling

Tiles are often installed in rooms where there is an increased risk of pollution. From what the floor can get dirty, it seems to be clear by itself. But, if you delve into the question, then there are a lot of reasons.

Often the tiles on the floor get dirty and look ugly.

Many factors affect the fact that the seams between the tiles begin to darken.

The causes of contamination of the joints between tiles are quite diverse.

In addition, it is worth adding that there is a factor that you and your actions do not influence - this is time. After a certain period of time, the floor tile color may turn black on its own.

Tiles may also darken over time.

Why it is necessary to clean the joints between tiles

Washing the coatings regularly is beneficial for all residents of the room, as it saves from allergic reactions to dust. In the case of tiles, this is also true. Since water and its particles can linger there, this contributes to the development of mold. This type of pollution poses a particular danger to the human body.

The coating must be cleaned regularly, otherwise mold can accumulate there.

This is a provocateur of: respiratory diseases (including asthma), dermatitis, body poisoning, diseases of the nervous and circulatory systems. In addition, it lowers the immune system.

Mold can cause various diseases, so it is necessary to fight it.

Cleaning options

Cleaning options depend on the level of contamination. If it is simple dust, it can be removed by the same method as usual: a vacuum cleaner or a broom. Then, when the place of pollution is complex, you can apply a household or folk option.

The cleaning method is selected depending on the degree of soiling.

But how to clean the seams between the tiles in the bathroom, if there is high humidity? This factor affects the development of fungal infections, so it is recommended to remove them with special means with antifungal components in the composition.

It is advisable to choose products with an antifungal composition.

Steam cleaning

The method is not difficult, only a household steam cleaner is required. A big plus will be if your machine can produce steam with a temperature of 175 degrees Celsius. And the convenience of adding a special brush nozzle, which will help to clean the seams deeper.

Cleaning tiles with a steam cleaner is quite easy.

What can be done by ferry? Kill bacteria that cause disease and even mold spores. In addition, they can cope with old stains.

Steam can kill not only mold, but also pathogenic bacteria.

For a good finish between seams, rinse with water and apply an antifungal agent. With the steam generator brush on the seams, move slowly. If contamination remains, the procedure can be repeated or removed with an old toothbrush or cloth.

An antifungal agent must be applied before steaming.

What folk methods can be used

The folk method is an option to clean with what is at hand. The cost of traditional drugs is extremely low. These advantages include the lack of aggressive means.

The funniest and most popular way is Coca-Cola or Pepsi. Here, gloves are not needed to work with this liquid, and the effect is impressive. You just need to pour on the seam, wait and wipe off.

Method 2: dissolve ammonia, tooth powder, citric acid with mustard and baking soda in water. What is formed, we put on the seams. We give half an hour of time for absorption and wash off.

You can make your own cleaning mix.

Quick method number 3: add 100 gr. to a liter of water. bleach and mix. Leave the product on the darkened seams for 10 minutes. Rinse thoroughly with water and dry with a dry cloth.

You can clean the spaces between tiles with bleach.

Please note! The composition is quite aggressive, so ensure good ventilation if dirty bathroom tiles and protection for hands.

After the aggressive compound, the room must be well ventilated.

In most cases, nothing needs to be rubbed. Pollution lags behind by itself.

Seam cleaning with special chemicals

The range of household chemicals is expanding every day. Manufacturers know how to make such a composition so that you know how to clean the seams between the tiles in the bathroom and it was effective. When working with these tools, the use of rubber gloves and even respirators is mandatory.

It is necessary to work with household chemicals in rubber gloves.

Liquids:

  1. Cif;
  2. Domestos;
  3. Amway;
  4. Silit;
  5. Pemolux.

This list has proven to be effective and gentle on tiles.

There are also other options: sponges, sprays and even markers. Among the sponges, melamine can be distinguished. It is white, impregnated with melamine acid and can bleach the surface.

Melamine sponge is a good helper in cleaning the seams.

Regarding markers, it is worth noting that they can often contain an antifungal component.

Mechanical ways to freshen floor tile joints

You can freshen up the grout with your own hands by removing the top layer of grout. To do this, you need a special tool that looks like a chisel and they need to work out the entire surface. The method is very laborious, but effective. In addition, here your body is exposed to chemicals.

The mechanical method is the most time-consuming, but effective.

How to clean grouts after repairs

When repairs are completed, the dirt remains on more than just the surface of the floor. Here the problem arises, how to clean the dirty tile joints in the bathroom. And this is the most time-consuming process for cleaning.

Often dirt remains after repair work.

It will be possible to apply folk remedies. For example, a solution of ammonia with ethyl alcohol, vinegar, or use a steam cleaner.

For starters, you can use folk remedies.

A simple option - special chemicals from the store. And a difficult method is to remove the top layer of grout.

Learn more