Home » Misc » Faux finish plaster walls

Faux finish plaster walls


How To Create A Faux Plaster Wall Using Paint (And A Scraper!)

DIY Mar 21, 2022

Share

I’ve been wanting to give my office a refresh for a while now and finally decided to try something quite different because, well, why not? It was a gamble, but so fun to create a faux plaster wall using paint!

I wanted it to look like an old, aged plaster wall, with a beautiful patina look, like some I have seen in my travels to Sri Lanka.  I have to admit, it felt a little daunting to create something that’s such a big statement, but painting this was surprisingly simple. Layer by layer, adding details and stepping back to assess, I took my time and slowly covered the whole wall in this layered paint effect, that ended up looking like beautiful aged plaster! Read on for how to create a faux plaster wall using paint.

The Inspiration

I spent a fair amount of time workshopping what I wanted to do in this space, I even took it out to a vote over on Instagram, sharing a few different options. Resoundingly you guys liked one inspiration image I shared in particular (via this design studio). So I set out to create something inspired by that!

Choosing the Colours to create a faux plaster wall using paint

I worked with British Paints on this project and spent quite a bit of time testing their colours to make sure I chose the right ones. In the end I chose Forever Peach, Rose Candle, Ballet Princess and Natural Paprika. I decided to use 3 different shades of pink and then one darker colour just to add a small amount of detail at the bottom. I think it’s important when creating a plaster/aged finish with paint that the colours are quite similar.

Testing the Technique

Before starting on my wall, I did a practice piece on some plywood to try some different techniques. Because I did this and figured out what tools work, you don’t necessarily need to do one yourself, but a trial on a piece of paper or wood is always valuable for getting used to the technique or testing colours.

How to paint a faux plaster look using a scraper

Materials you need

How to

1

Begin by prepping your area - lay down drop cloths, tape along the floor or skirting board and give all your paints a really good mix. Having everything ready and prepared always makes the process much smoother!

2

I began by rolling on some big patches of colour to cover the bulk of the wall. Rolling the first layer gives a nice consistent base for the rest of the scraped layers. I also decided to do a 3/4 wall like my inspiration photo, and because of the aid conditioner that's in the room and wouldn't have fit into the painted section.

3

I then rolled another section of the next darkest tone, and tried to blend the colours well along the edges. I also painted the skirting boards for this, but you can also leave them unpainted if you prefer. Next I found that swirling a very small amount of a different colour through the paint tray before rolling helped in adding a little bit of depth to the block of colour. Having said that, one thing to remember with this paint finish is that you can always cover and add layers as you go so don't worry too much about the finish at this stage. 

 

4

I then started scraping out the edges so they didn't look like a flat rolled edge. First I simply used the wet paint that was already there to soften out the edges, and then I found dipping the scraper into the paint tray and then pushing out the paint in different directions worked well. 

5

Now it's time for layering, the fun part! Using the scraper, I dipped it in paint before scraping it across the wall. The more paint you use the more solid the look, and the less paint on the scraper, the look will be lighter and more transparent. Holding your scraper flat against the wall will also give texture to the look. Working in sections, I simply scraped on paint, in places allowing it to mix and in other keeping it more of a block.

6

I did one 'coat' of layers, simply alternating colours as I went along. Then I took a break and let it dry so that I could see the true colours and decide what more was needed. I ended up adding larger blocks of single colour to the wall during my second painting session, to make it a little more simple. 

  

7

I also added a few lighter tones of pink at the top and darker tones of pink at the bottom, to ground it a little more, without being too ombre. Once I was happy with the pinks, I added a very small amount of Natural Paprika, scraping it up from the bottom and sides of the wall. Less is more with this, I just wanted to add some depth and ground the wall, almost to make it look more aged.

Voila!

Honestly I am so happy with this design! It’s A LOT I know, but I think it has really lifted the space and made me look forward to sitting at my desk. I think this technique would work so well in different colours, even in lighter tones for a really neutral, plaster look. I can’t wait to experiment some more with it!

 

 

 

 

This post is in collaboration with British Paints

How to create a plaster wall effect: Four ways with Annie Sloan Paint

It probably hasn't escaped your notice that plaster wall effecthas been trending for a while now – and they're set to stay for a long while yet as we embrace natural, organic and raw-form finishes.

But you don't have to call the plasterer in to get the desired effect that you see popping up all over Instagram influencers' houses.

HOW TO CREATE A PLASTER WALL EFFECT

See: Kitchen trends 2020 - these latest designs are ahead of the curve

With some clever tips and techniques, you can actually achieve the look with paint alone. Here, Annie Sloan shows us how to create four different plaster effect walls for an easy and on-point refresh.

1. INDUSTRIAL PLASTER EFFECT WALL IN THE KITCHEN

(Image credit: Annie Sloan)

Updating your kitchen is the perfect project for painters of all abilities. To achieve this plaster effect, inspired by Moroccan ‘Tadelakt’, apply Chalk Paint onto a base of Wall Paint using thick strips of cardboard. Drag, wipe and scrape the paint along the wall, building up layers of colour and tone, until blended to your liking. Once dry, finish with a thin layer of Clear Chalk Paint Wax to seal and protect your handiwork.

The products used were Chalk Paint in Graphite, Chicago Grey and Athenian Black over Wall Paint in Original. Cabinets in Athenian Black. Pots and jugs in Amsterdam Green. Wooden shelves treated with Dark Chalk Paint Wax. Tea towel in Ticking in Graphite.

See: The expert home staging tips that you can do yourself

2. RUSTIC PLASTER EFFECT BATHROOM

(Image credit: Annie Sloan)

Ensure your tub time is unique and chic with an avant garde statement wall. The plaster effect look is relatively easy to achieve with three Chalk Paint colours, Matt Chalk Paint Lacquer and some patience. For a cohesive tonal look throughout the rest of your bathroom pick a shade from your plaster effect palette to paint your bathtub and floorboards. In this case, Chalk Paint in Scandinavian Pink was used for the bath and a wash of Old White on the floorboards. Both were then given a coat of Matt Chalk Paint Lacquer to finish.

For the wall, begin by painting the entire wall a warm rich colour – in this instance, Scandinavian Pink. Once dry, apply a neutral earthy shade in random areas – here, Chalk Paint®in Honfleur. While those patches of Honfleur are still wet use crumpled newspaper to spread the paint around, giving a textured rough-luxe look. Allow to dry before taking the lightest colour (here Old White) mixing with water, and using a damp cloth to wash over the wall. Allow this to dry for a cloudy look, then apply more diluted Old White Chalk Paint along the top of the wall (overload a brush and then allow the paint and water mixture to drip down from the brush tip). Finally, once dry, use Matt Chalk Paint Lacquer to protect.

3. TERRACOTTA PLASTER EFFECT WALL

(Image credit: Annie Sloan)

Transform your garden room or dining area into a Mediterranean-inspired oasis. To create this plaster effect, first apply a base layer of Chalk Paint in Scandinavian Pink to the entire wall. Once dry, add sections of diluted Henrietta over the top in random areas. 50:50 Chalk Paint and water should be a good starting ratio but adjust as you go for more variation in opacity and character. Paint the mix on in small sections and whilst still wet use crumpled up newspaper to rub some of the paint away and create texture. Allow to dry fully and give a final wash of Paloma all over to give that powdery, romantic, plaster effect.

This wall is in Annie's garden room. If the wall is sheltered there is no need to use lacquer, but if you’re in a particularly wet or sun-exposed area consider using Matt Chalk Paint Lacquer for a muted, soft look or Gloss Lacquer to suggest Venetian egg gloss plaster. Both provide full UV protection to prevent colours fading and add durability.

See: These are the 15 most popular paint colours, according to Instagram

4. VENETIAN PLASTER EFFECT WALL

(Image credit: Annie Sloan)

This luxuriously textured wall has been transformed with a palette of colours appropriate to a rustic-glam look.

Firstly, Annie painted the wall with Chalk Paint in Old White. Then, thick streaks of Chalk Paint were applied using a strip of cardboard. Tip: to help thicken the paint and expedite this process, put your Chalk Paint® in the fridge or other cold area prior to usage. Replace the piece of cardboard when it becomes soggy. Annie used Duck Egg Blue, Country Grey, French Linen and Original to give texture and interest. She then applied touches of Brass Leaf to heighten the suggestion of faded grandeur. Annie applied the Brass Leaf with Gold Size where the sun hits the wall for added impact and so that the character of the wall develops throughout the day, depending on the light.

Finally, Annie used Gloss Chalk Paint Lacquer to protect and give that sheen typical of Venetian Plaster.

See more: The 14 most common decorating mistakes that first time homeowners make

types, features, photos, how to choose

Plaster is not always a prefinishing coating. Its decorative subspecies is excellent as a finishing layer

Decorative plaster is becoming more and more popular - this material looks spectacular, does not require paint or wallpapering. We figure out together with the designer what this type of finish is good for and how to choose the right plaster for a modern interior.

Expert in this article: Svetlana Andreeva, interior designer of the online service for finding specialists "Profi"

adv.rbc.ru

What is decorative plaster

Decorative plaster is a finishing material for the final wall covering during fine repairs. Unlike rough plaster, decorative plaster is not used to level and fill cracks. Before applying it, you need to prepare the surfaces and cover them with a primer for better adhesion.

Decorative plaster allows you to create an original design in the room, combining a variety of textures and colors. It is economical and durable, resistant to damage, easy to clean, dust and dirt rarely settle on it. On surfaces treated with decorative plaster, it is easy to eliminate minor defects - just apply a new layer. The disadvantages of the material can only be attributed to the high cost. But surfaces decorated with plaster require cosmetic repairs much less often than those pasted over with wallpaper.

Wallpaper in the kitchen: 7 myths to stop believing in

Decorative plaster composition

This type of coating contains cement, lime and sand; Other fillers may be present depending on the species. Mortars vary in texture, viscosity, and the type of base required. In total, there are four main options on the market.

Acrylic plaster

Sold ready-made. The crushed mineral fillers and acrylic resins in this formulation are supplemented with ingredients to improve surface bonding properties. Acrylic plaster dries quickly, is durable, can be used in rooms with high humidity - ideal for a bath. But on the sunny sides of the apartment, acrylic plaster can crack under the influence of ultraviolet radiation, and its main disadvantage is low fire resistance.

Mineral plaster

Mineral plaster contains cement, lime, clay and stone chips. This is the most budget subspecies of decorative plaster. It is sold as a powder to be diluted with water and is easy to apply, making it especially popular for DIY repairs. This is the most environmentally friendly type of plaster, it is resistant to high humidity and low temperatures. The mineral mixture is airtight and heat resistant. But it does not serve for too long - only about ten years.

Silicone plaster

The most versatile option. The silicone compound is flexible and adheres well to any substrate. It is sold ready-made, does not require breeding, and the color scheme is very diverse. It is easy to work with such a mixture, even without repair skills. Before applying silicone plaster, you will need a special primer, but it lasts a long time - and pays off, despite the high cost.

Silicate plaster

The binder in this mixture is liquid potash glass. This coating is considered an excellent choice for outdoor work. Silicate plaster is water-repellent, durable and fireproof, but its cost is higher than that of mixtures without glass. It is better not to apply silicate plaster on your own if there are no repair skills - it quickly hardens, the master will need experience and skill.

How to choose the right plaster for interior and exterior work

Types of decorative plaster

In modern interior design, not only the listed basic textures of decorative plaster are used. For example, wood fibers, mica and small stones can be added to the mixture. For application, rollers and stamps are used, with which you can create original patterns and textures. An uneven layer of decorative plaster can imitate rocks, concrete, silk, and even wood. Consider the most popular options.

Bark beetle

The variant of the mix was named because of its visual resemblance to bark beetle-infested wood. Such plaster is used both for residential premises and for building facades. It is durable and maintains a beautiful appearance for a long time. "Bark beetle" is popular with pet owners who like to scratch walls: on such a texture, traces of "cat vandalism" will remain invisible.

Cement and Concrete

This coating makes it possible to obtain ideal walls for a loft-style interior or to decorate accent surfaces in certain parts of the apartment. This plaster can cover both the walls in the rooms and the facades of buildings.

“Stone”

Mixture for decorating surfaces to look like natural stone. A similar 3D drawing can be made with both mineral and acrylic mixtures.

"Fabric"

Plastering can be used to recreate the texture of fabrics very faithfully: silk, velveteen or linen. This format looks good in eco-interiors. Unlike real fabrics, the coating does not require complex care. This type of decorative plaster is well complemented by stamped drawings.

Marble

This type of mortar imitates marble slabs. Often used in luxury interiors, suitable for both classic and bohemian styles.

"Rain"

Decorative plaster can even imitate water jets flowing down the wall. This effect perfectly masks minor flaws, roughness and irregularities. Depending on the viewing angle, the picture may glare and be perceived differently.

Map of the World

This type of plaster contains lime components. Usually it is applied in several layers of different shades, resulting in voluminous deep patterns. It is often used to create stylized geographical maps in the interior - hence the name.

Venetian

Venetian plaster is suitable for creating both matt and glossy surfaces. From above it is polished with a wax composition, which provides a reflective effect.

Travertine

Original travertine is a fine-grained rock. It is also called an imitation of a plaster mixture. It is distinguished by its strength and durability, is presented in a large number of shades and gives the walls a noble effect of antiquity.

Bas-relief

Plastering can also be used to make picturesque moldings. For this, a light paste with glass granules in the composition is used. The material is easy to mold.

Marseille Wax

A type of decorative plaster used to create deep relief surfaces. The final layer of such a mixture is covered with wax so that it becomes soft to the touch. The drawing is completely dependent on the movement of the hand of the one who applies it.

How to choose plaster

Svetlana Andreeva, interior designer of the Profi online service:

— Decorative plaster is now very popular as a universal coating, with which you can create non-standard interior solutions. It is important that this is an environmentally friendly finishing material, and the walls covered with plaster are strong, moisture resistant, and durable.

The coating looks harmonious in all interior styles. The main thing is to choose the right texture and color. To buy the right plaster, you need:

  1. Decide on the style of the interior;

  2. Understand the geometry of the room;

  3. Consider combining with materials to be used: brick, stone, frescoes, wallpaper;

  4. Consider the color of furniture, tiles, floor coverings, curtains, etc.

Different colors and textures of the plaster emphasize the chosen style and create an individual atmosphere in the house. The most fashionable textures now are microcement, concrete and silk.

pros and cons of decorative plaster - INMYROOM

Today decorative plaster found widespread use in the field of wall processing, moreover, it is used, as in carrying out exterior finishing work, and when decorating surfaces inside varied premises. What are plaster compositions of various types, what varieties of them can be found on the modern market and what Does this finishing material have any special features?

Use in the interior

Especially often decorative plaster is used for finishing of wall planes inside residential, office or some other premises, that is, to create original interiors. At the same time, she significantly differs from the usual in its aesthetic quality. The fact is that decorative wall plaster contains in its composition, in addition to sand, lime and cement, various granular components, or any other additives. This is what makes it possible to give wall decoration is an almost limitless number of options for textures, textures and color choices!

Very impressive looks like textured plaster interior, when the walls are deliberately rough or even not very even surface. However, wall decoration decorative plaster, photo variations of which can be easily found in this article, allows you to give treated surfaces and perfect evenness, and the impression of glossiness, and even imitate the most a variety of natural or artificial materials - stone, brick, etc. Further. Exists as a white decorative plaster, as well as many other options, including, perhaps, every possible variety of color palette.

Benefits and disadvantages

Compared to many other finishing materials intended for wall processing, decorative plaster has a whole a number of undeniable advantages. These include, in particular, the following:

This an impressive list makes it quite obvious the answer to the question of why decorative wall plaster has gained so high popularity and wide circulation! What As for the shortcomings, among them one can note only a small vapor permeability of some varieties, as well as susceptibility to negative exposure to direct sunlight.

Varieties by binder

Modern decorative plaster in the interior can vary significantly in the components used as binders materials. The most popular today are the following varieties.

Acrylic based

The binder is acrylic resin. It is a high molecular weight polymer providing high properties composition elasticity. Such plaster may contain pigmenting additives, both organic and inorganic origin, giving the composition the most various colors. However, acrylic plaster is characterized by low steam conductivity and quickly loses its qualities under direct sun exposure.

On mineral base

Very often, decorative wall plastering is carried out using compounds, made on a mineral basis. The binder in them is cement. Sold in the form of dry mixes, which are easily diluted with water. Characterized high durability at the most attractive price. However, subject to destruction under severe mechanical stress. In addition, it has a relatively limited range of colors - mainly light tones.

Silicone-based

These types of decorative plasters are used as a binder various synthetic resins (silicone). Plasticity, ease of application and resistance to ultraviolet radiation allow the use of a similar type finishing material, both for facade work and for interior decoration interiors. In addition, this variety, offered as a ready-made mixture, has a high degree of moisture resistance, does not attract static electricity, which means dust, dirt, mold, fungus, and so on.

In addition, decorative plaster in the interior, made on a silicone basis, offers a truly limitless number of color options. True, its cost is significantly higher, than most other species.

Silicate based components

This type is based on the so-called water glass, which is used as a connecting element. Liquid glass is a mixture, using in various proportions and consists of materials such as: · alkaline potassium carbonate; · natural quartz sand; · potassium derivatives; · various pigment granulates.

Such compositions are characterized by high strength, durability, water-repellent abilities, fire resistance and aesthetic appearance. silicate plaster, supplied mainly in the form of ready-made mixtures, allows you to create a truly unique interior design for any room or the appearance of the facade of a building or structure. True, and the cost of such mixtures high enough.

In addition all of the above, this type of finishing material for processing surfaces has another unique property. Initial composition You can change it yourself by adding certain components to it! What can make artistic plaster photo, posted on our website, demonstrate quite clearly!

Type fillers

As for the types fillers, which are most often used in the production of artistic plasters, they can be very diverse! The main task of fillers of one type or another - to provide a certain texture and texture. On today the most popular varieties by type of fillers are the following groups:

First two types give the treated surfaces a certain degree of roughness, relief or even unevenness. Plaster "Venetian" type is smooth. Consider the features of each variety in more detail.

Textured plaster

Features of this type are in a high-viscosity structure with a fairly coarse dispersion. And the use of fine-grained stone as fillers, marble or granite chips, mica, wood or even linen fibers allow you to hide large irregularities and surface defects.

In addition, application composition does not require any special complex preparation of the walls, and the layer itself solidification acquires high strength and durability, water resistance, combined with high air permeability.

Varieties

Today the largest the following subspecies of textured plaster are popular:

Structural plaster

Structural plaster in many ways similar to texture. However, these types of decorative plaster for interior work also have some set of significant differences. This finishing material has a much less grainy structure and is made on the basis of an acrylic or silicate base. This causes its use, mainly exclusively for internal work. Instead, the composition of the components and introductory ingredients make it optimal solution for use in bathrooms, corridors or rooms with high humidity!

Venetian variant

The name is - rather conditional, since it has its roots in a certain medieval style. On the other hand, this style involves much higher labor costs, since the layers of the composition are applied in several layers. Besides, this type is much more expensive, as it requires a much finer grit, and often the use of fairly expensive materials.

Specific types of artistic plaster

Today there are also other types of artistic plaster, which can be fully attributed to specific.

Learn more