Best paint brands for interior walls
The 10 Best Paints for Interior Walls of 2022
The Sherwin-Williams Cashmere Interior Latex Paint is our top pick
By
Theresa Holland
Theresa Holland
Theresa Holland is a freelance writer specializing in home improvement, cleaning, and bedding. She shares her favorite life hacks on her blog The Taboo Textbook.
Learn more about The Spruce's Editorial Process
Updated on 04/22/22
Fact checked by
Richard Scherr
Fact checked by Richard Scherr
Rich Scherr is a seasoned technology and financial journalist who spent nearly two decades as the editor of Potomac and Bay Area Tech Wire. The Baltimore native also covered the technology scene for LocalBusiness.com and has been a regular contributor to the sports pages of The Baltimore Sun and The Washington Post.
Learn more about The Spruce's Editorial Process
We independently research, test, review, and recommend the best products—learn more about our process. If you buy something through our links, we may earn a commission.
The Spruce / Chloe Jeong
Painting your walls does not need to be a major undertaking, thanks to the variety of modern products that eliminate the need for priming and offer a faster drying time than traditional paints.
We researched the best paints for interior walls, evaluating ease of application, finish, color selection, formulation, and value. Our best overall pick, the Sherwin-Williams Cashmere, is a paint/primer combo that applies evenly, is easy to clean, and looks and feels silky.
Here are the best interior wall paints.
Our Top Picks
Best Overall:
Sherwin-Williams Cashmere at Sherwin-williams.com
Best Budget:
Glidden Interior Paint at Home Depot
Best Color Selection:
The Spruce Best Home by KILZ Interior Paint & Primer in One at Amazon
Best Splurge:
Backdrop Standard Finish at Backdrophome. com
Best Low-VOC:
Clare Wall Paint at Clare.com
Best Chalk:
Rust-Oleum Chalked Paint at Amazon
Best Matte:
Valspar Signature Interior Paint at Lowe's
Best High-Gloss:
Valspar High-Gloss Paint at Lowe's
Best White:
BEHR Premium Plus Ultra Pure White at Home Depot
Best for Ceilings:
Benjamin Moore Waterborne Ceiling Paint at Amazon
In This Article
-
Our Picks
-
What to Look For
-
FAQ
-
Why Trust The Spruce
Courtesy of Sherwin-Williams
View On Sherwin-williams.com
Who else recommends it? Wirecutter also picked Sherwin-Williams Cashmere.
Our top choice is Sherwin-Williams Cashmere. This acrylic latex paint/primer combo stands out for its buttery smooth application. It automatically levels out into an even layer. In other words, you won't have to worry about permanent roller marks or brush strokes.
When your walls dry, you'll be left with an ultra-silky, rich finish that looks great from every angle. This wall paint offers exceptional coverage, effortlessly hiding any colors or marks underneath. It comes in five different sheens, and you can upload your own color to create a custom hue.
The 11 Best Paint Brushes of 2022
Courtesy of The Home Depot
View On Home Depot
If you're on a tight budget, Glidden Essentials Interior Paint is a high-quality option with an affordable price tag. When you want to refresh your living room, entryway, bedroom, or home office, this paint provides excellent coverage and an easy-to-clean finish.
Glidden Essentials can be tinted into upwards of 1,100 colors, and you can choose from flat/matte, eggshell, or semi-gloss. We also appreciate that this is a low-VOC (volatile organic compound) latex paint with minimal odor. Plus, Gliddon backs it with a 15-year warranty.
Price at time of publish: $18
Courtesy of Amazon
View On Amazon
Your next paint project is about to get more colorful! The Spruce Best Home Interior Paint & Primer in One is a premium acrylic paint that’s perfect for interior walls. After listening to reader feedback and experimenting with different formulas, we studied the most pressing concerns (odor, formula, application, and color). We developed a paint product that we love and think you will too!
Produced by KILZ, you can choose from matte, semi-gloss, and eggshell finishes. While all three are stain-resistant and long-lasting, our matte formula has the lowest level of sheen (0 to 4 units at 85 F) and is perfect for ceilings, bedrooms, and other rooms that don’t see as much foot traffic. The eggshell or semi-gloss paint has a slight sheen (17 to 22 units at 85 F) that’s decorative and easy to clean.
We’ve invested considerable time testing this paint. We are impressed with the thick coverage and depth of color. We found that one coat will do when you expect to need two. Since we know that picking a color can feel daunting, we narrowed down our colors to 32 curated shades that are elegant and versatile. You can’t go wrong with any color you pick. Low odor was also important to us; our product is low VOC and low odor. You can apply this paint with a nylon or polyester brush, a roller, or an airless paint sprayer. It is available exclusively on Amazon.
The Spruce Best Home Paint: See the Collection
Courtesy of Backdrop
View On Backdrophome.com
“Curated and DIY”: Backdrop Paint
If you're in the market for luxury wall paint, you might want to splurge on a can of Backdrop Standard Finish. This premium, water-based paint is formulated with acrylic resin, which makes it easy to apply. This self-priming, low-VOC formula goes on smoothly and dries quickly with minimal odors.
Backdrop Standard Finish delivers a rich pigment with a perfect low-sheen, semi-matte finish. Choose from tons of stunning colors with irresistible names, like Rose Quartz, Skywalker, and Drive-Thru Safari. There's a mix of bold colors that are perfect for accent walls or big design moments and more neutral shades that will work in any home.
The Spruce / Deanna McCormack
What Our Testers Say
"No need for a primer! The paint had great coverage. It was thick, spread well, and dried fast. I did two coats over an existing dark grey, and it was perfect." — Deanna McCormack, Product Tester
Courtesy of Clare
View On Clare.com
If you prefer low-VOC products, you'll appreciate the VOC-free formula of Clare Wall Paint. This Greenguard Gold-Certified paint emits zero volatile organic compounds. Plus, it has an ultra-low odor, so you can breathe easy not only while you apply it but for long after.
While this 100 percent acrylic paint is a bit spendier than most other brands, you'll get what you pay for. It offers impressive coverage and a remarkably smooth, durable finish that resists dirt, mold, and mildew. Get super convenient peel-and-stick color swatches before you purchase a full can.
Price at time of publish: $64 for gallon
Courtesy of Walmart
View On Amazon View On Home Depot View On Walmart
Your best bet for chalk paint is Rust-Oleum Chalked. The ultra-matte formula creates a charming, semi-distressed look that's ideal for rustic and vintage-inspired interior design schemes.
Besides painting your walls, you can use Rust-Oleum Chalked to transform wood furniture, metal fixtures, and ceramic items around your home. This low-odor latex paint is easy to apply, effortlessly adhering to most surfaces, and is dry to the touch in 30 minutes.
Price at time of publish: $32
Courtesy of Lowe's
View On Lowe's
If you like a matte finish, we recommend Valspar Signature Flat. The tintable interior formula is a paint and primer in one. Unlike other matte paints, it has special "scuff shield technology" that protects against scuffs and stains. It's also resistant to fading, scratching, and scrub marks.
Valspar Signature Flat goes on smooth and effortlessly conceals any existing paint, marks, or imperfections on your walls. As a Greenguard Gold-certified product, this is a low-VOC paint.
Price at time of publish: $40
The Best Paint Edgers to Get Professional Results for Any DIY Project
Courtesy of Lowe's
View On Lowe's
For an extra glossy finish, Valspar Ultra High Gloss is the way to go. Like its flat counterpart, this paint/primer formula resists stains, scrub marks, scuffs, and general wear and tear. It has a washable finish, meaning most marks and stains will wash away with soap and water.
This acrylic paint is suitable for indoor and outdoor use. No matter where you apply it, you can count on this burnish-resistant finish to retain its glossy appearance.
Price at time of publish: $41
The 12 Best Paint Roller Covers of 2022 for Any Project
Courtesy of The Home Depot
View On Home Depot
If you're looking for the perfect stark white color, check out Behr Premium Plus Enamel Ultra Pure White. This combined acrylic paint and primer come in five sheens, including flat, eggshell, satin, semi-gloss, and high-gloss.
The low-odor formula glides on easily and covers your existing wall color—even dark shades. It resists mildew and is ideal for bathrooms, kitchens, laundry rooms, basements, and other moisture-prone spaces.
Price at time of publish: $40
Courtesy of Benjamin Moore
View On Amazon View On Benjaminmoore.com
Benjamin Moore Waterborne is the best interior paint for ceilings. The ultra-matte sheen hides any imperfections on your ceiling, leaving a virtually flawless finished appearance. It's easy to use and resists gravitational dripping and splattering. This low-odor ceiling paint emits zero VOCs, giving you peace of mind about the air you breathe in your home.
Price at time of publish: $60
Final Verdict
The best paint for interior walls is Sherwin-Williams Cashmere Interior Acrylic Latex (view at Sherwin-Williams). You can't beat the buttery smooth application and rich, low-stipple finish. However, if you're having a hard time choosing a color, you can't go wrong with The Spruce Best Home by KILZ Interior Paint & Primer (view at Amazon). The 32 shades are curated, providing foolproof versatility and an elegant appearance.
Color
The color you pick is likely your biggest consideration when selecting interior paint. Even if you already know what color interior paint you want, there are many shade choices. Most major paint manufacturers offer an extensive selection of color chips. Use them to narrow down your options, then consider purchasing a pint-sized paint tester to try out the color at home if you’re still torn.
If you can’t find an exact match in the color swatches, typically, you can have a custom color mixed at your local paint store. Bring in a sample of the shade you’re imagining—it can be anything, even a pillow or a favorite sweater—and a color code machine called a spectrophotometer scans and deciphers the color. The machines aren’t perfect, so visually check the color to see if it’s on target with what you were imagining. The paint mixer should be able to tweak it further, if necessary.
Another option is a small device, the Color Muse (view on Amazon), which can scan a wall, counter, or other object and find you the closest color match among top paint brands. The device reads the RGB (red, green, blue) values of the color and identifies paint choices that match. If no matching shade is found, the device provides you with the RGB code to create a custom paint shade. Paint color options are limitless. The bigger task is selecting your top choice for your space, style, and furnishings.
Finish
You have three basic finish categories to choose from, and sometimes paint is categorized by these finish types. Select from a flat finish, low-luster, or glossy finish.
Flat paint is exactly as it sounds—the resulting finish doesn’t reflect much light. It’s also called a matte finish. This type of interior paint is good for surfaces that won’t see much action, like ceilings. It’s usually the least expensive type of interior paint, and it can be difficult to keep clean and look fresh. Only use flat paint if you’re on a tight budget and using it on an out-of-the-way location in your house. On the plus side, matte paint will hide imperfections better than shinier finishes.
The next type of finish is low-luster, which only offers a slight reflection of light. Low-luster paints include both eggshell and satin finishes. Of the two, the eggshell is slightly more matte. This type of paint is prevalent since it’s versatile and offers increased durability and cleaning ability compared to flat paint. You’ll likely want to use interior paint with a satin or eggshell finish in the majority of areas within your home, such as living room and bedroom walls, hallways, bathrooms, and more; all are good places to use a low-luster finish.
Finally, paints with a glossy finish offer a high amount of sheen or light reflection and a harder finish than flat paints. This category includes semi-gloss paints that are slightly more matte than their glossy counterparts. Glossy paint is used for windowsills or handrails, while semi-gloss paints are popular in higher humidity areas, like kitchens or bathrooms. Glossy paints look beautiful but magnify any imperfections in the surface they’re painted on, so take this into account when selecting your paint finish.
The finish you choose will depend on where you are painting and how resilient you want the finish. Aesthetics also play a role; high gloss finishes add drama, while a more matte appearance might play into calmer surroundings.
VOC
Volatile organic compounds are commonly referred to as VOCs, and it’s important to know if your paint has them. If the thought of a freshly painted room makes your nose wrinkle, it’s because you’ve smelled VOCs before.
To keep the chemistry lesson brief, VOCs are compounds that are emitted from some solids or liquids. Many latex-based paints are considered low VOC formulas. These are a better option for interior painting since they will minimize the exposure you have to VOCs during painting and afterward.
Oil-based paints have a higher concentration of VOCs, and so do the paint thinners needed to clean the brushes and rollers you use to apply the paint. If you opt for oil-based paint or paint that isn’t low VOC, take extra precautions to ventilate the area.
Additives
Some interior paints have additives to enhance the application or finish of the paint. Consider what you’re trying to achieve with your painting project to determine which—if any—additives are necessary for your purposes.
Enamel is one of the most common additives you’ll find in interior paint. The addition of enamel to the paint formula reduces the paint's porosity and results in a harder, more durable finish. This could be important for high-traffic areas where dirt might infiltrate the paint or if the finish is subjected to lots of touching and bumping.
Acrylic is often added to oil-based paint to prevent yellowing. This is a common downfall of oil-based interior paint. By adding acrylic, the paint stays true to its original hue longer. You’ll also see acrylic added to latex paints to improve their durability and finish.
Theresa Holland researched and wrote this roundup. As a professional writer and homeowner with a DIY spirit, she has substantial experience testing and reviewing home improvement products. In addition to The Spruce, she also writes for MyDomaine.
Additional reporting and research was done by Lauren Murphy, an experienced writer and editor who specializes in DIYs, home upgrades, and other home-related topics.
Updated by
Lauren Murphy
Lauren Murphy
Lauren Murphy is a DIY expert and writer with over five years of hands-on experience cooking, crafting, and making home decor projects. She has a degree in Environmental Science from Western Washington University and continues to be passionate about environmentally friendly DIY projects. Lauren has also written for Earth 911, Forbes Advisor, and HuffPost.
Learn more about The Spruce's Editorial Process
Article Sources
The Spruce uses only high-quality sources, including peer-reviewed studies, to support the facts within our articles. Read our editorial process to learn more about how we fact-check and keep our content accurate, reliable, and trustworthy.
The Best Interior Paint. Wirecutter. https://www.nytimes.com/wirecutter/reviews/best-interior-paint/
What Are Volatile Organic Compounds? United States Environmental Protection Agency
The Best Interior Paints Tested in 2022 - Top Picks from Bob Vila
We may earn revenue from the products available on this page and participate in affiliate programs.
Photo: Glenda Taylor
Whether painting walls, furnishings, cabinets, or trim, quality interior house paint is the key to good-looking, long-lasting results. But the sheer variety of interior paints to choose from at home improvement centers and hardware stores can be confusing. Purchasing the wrong one could negatively affect your project’s ease, speed, and durability—and even impair indoor air quality.
With so many recent improvements in paint formulations, including an increasing number of eco-friendly options, we were curious about which of the brands and types available today were really the best—so we tested them. We researched and analyzed all the top brands from the top manufacturers, then narrowed it down to eight options. We tested each of the paints by brushing and rolling them on, and we analyzed how well they covered and whether they stood up to typical cleaning.
Ahead, learn more about selecting the right paint for any interior project, and discover why the following products are among the best interior paint options for most users. Don’t miss our test results—we reveal the pros and cons of each pick!
- BEST OVERALL: Sherwin-Williams SuperPaint Interior Acrylic Latex
- BEST BANG FOR THE BUCK: Glidden Premium PPG Eggshell Interior Latex Paint
- UPGRADE PICK: Sherwin-Williams Emerald Designer Interior Latex
- BEST FOR KITCHEN AND BATH: Behr Premium Plus Interior Satin Enamel Paint
- BEST STAIN-BLOCKING: Sherwin-Williams Duration Home Interior Acrylic Latex
- BEST INTERIOR ENAMEL: Sherwin-Williams Emerald Urethane Trim Enamel
- BEST FOR CEILINGS: Behr Ultra Stain-Blocking Ceiling Paint
- BEST ONE-COAT PAINT: HGTV Home Infinity Interior Paint & Primer
Photo: Glenda Taylor
Types of Interior Paint FinishesAll of our recommendations are available in various finishes, including the ever-popular eggshell and satin. These finishes are the most widely used for bedrooms, living rooms, and dining rooms thanks to how they balance the durability of glossier paint finishes with the forgiveness of more matte ones—meaning they aren’t so glossy that they highlight imperfections in the wall. If painting a bathroom or a kitchen, consider bumping up the sheen one level to a semi-gloss for extra resistance to water. When researching interior paint reviews, try to notice whether the user mentions the quality of the finish.
Paints are available in five sheens: gloss, semi-gloss, eggshell, satin (velvet), and matte (flat). Matte or flat paints are the less expensive options, but they are harder to keep clean and are less durable. Flat paints are best for ceilings and low-traffic areas. Gloss is the easiest to clean, lasts the longest, and tends to be more expensive. Gloss paints work best on high-touch surfaces such as doors, trim, and cabinetry. Higher-sheen paints also take longer to cure.
- Flat/Matte: This finish has minimal shine. Matte/flat finishes provide excellent coverage and cover imperfections well. However, they are the least durable of all the finishes and best for surfaces that will not be touched much, like ceilings or formal dining rooms. Some manufacturers sell washable flat-paint options, but lower-quality flat paints may rub off with a damp rag.
- Eggshell: Eggshell is slightly more lustrous than flat paints. This finish covers imperfections, and it’s more durable than flat finishes. Eggshell paints are great for low-to-medium traffic areas like living rooms, hallways, and entryways.
- Satin: Satin is the most popular finish in interior paint finishes. This finish has a velvety sheen and is easier to clean than flat and eggshell paint finishes. Satin finish is a great choice for high-traffic areas like kitchens, playrooms, family rooms, bathrooms, and laundry rooms.
- Semi-gloss: Semi-gloss finishes are shiny and reflective. This finish is extremely durable and mildew-resistant, so these paints are best used in kitchens and bathrooms. Semi- and high-gloss finishes are among the most scuff-resistant paint options
- High-gloss: High-gloss paints have the shiniest and most reflective paint finish, and they are the most durable and washable. This finish is best for wood such as doors, trim, and cabinetry. However, users can also successfully apply high-gloss paint on walls in projects where they’re trying to make drywall look like wood, such as wainscoting (trim on the lower half of a wall) that’s made to mimic the look of wood trim.
A new coat of paint is a simple and affordable way to update the interior of a home. Although the color is crucial to achieving the desired overall effect, choosing the best paint for interior walls is just as essential to ensure pleasing results. Weigh these factors in any paint product to avoid common pitfalls.
ViscosityViscosity refers to a paint’s thickness and structure, also known as the paint’s body, which will generally be either dense or flowing. Paint with higher viscosity is a thicker, slower-moving paint. High-viscosity paints splatter and drip less but take longer to dry. Low-viscosity paints are thinner and tend to drip and splatter more, but they dry quickly.
A paint’s viscosity also informs which application method can be used with success. Ceiling paint has a higher viscosity than most wall paints and poses a lower risk of drips and splatters when applying overhead. Some types of interior wall paint have a lower viscosity, so they tend to drip off the brush or roller more readily. Their quicker dry times mean less waiting to put on a second coat.
DurabilityOil-based paints are more durable than water-based (a.k.a. latex or acrylic) paints. Oil-based paints are best for high-traffic areas or exteriors. Manufacturers offer only a few oil-based paints for interior use these days because they typically emit unpleasant, potentially unhealthy fumes. Fortunately, latex paints have become more durable and of higher quality.
A paint’s durability also goes hand in hand with sheen level, whether it’s oil- or water-based. The higher the sheen (such as semi-gloss or satin), the easier it is to clean and the longer it will last. However, higher-sheen paints can typically highlight any imperfections on the surface.
Suitability for the SurfaceInterior paints come in a few varieties: acrylic or latex (water-based), alkyd (oil-based), and newer water-based alkyd varieties that perform like oil paints but emit less harmful fumes. Shoppers will want to choose the type that holds up best on the surface they plan to paint.
Opt for the more consistent finish and fade resistance of latex or acrylic paint for walls, seldom-used furnishings, and cabinetry in dry areas. Consider the more impact- and rot-resistant oil-based or water-based alkyd paint for trim work, kitchen and bathroom cabinets, and everyday furnishings.
VOCsVolatile organic compounds (VOCs) are chemicals found in many oil- and water-based paint products that easily evaporate and can emit toxins into the surrounding air. VOC exposure can induce headaches, nausea, or liver and kidney damage, so the lower the VOC content, the more eco-friendly the paint. Seek out paints labeled “zero-VOC” or “low-VOC” to minimize exposure to harmful fumes. When painting outdoors, fumes are not as big a deal, but when applying paint for interior walls, most users prefer one that doesn’t smell too strongly or give them a headache.
Dry TimeBecause VOCs can be emitted into the air from the time of paint application up to a few months after the paint cures, choosing a paint that dries and cures quickly can help minimize VOC exposure. Look for water-based paints that dry to the touch in 1 hour and cure within 30 days. Oil-based paints should optimally dry to the touch in a few hours, can be recoated by 4 hours, and fully cure within 7 to 14 days. Most paints require the full 14 days to be cured sufficiently for washing or scrubbing.
Should You Buy a Paint and Primer in One?Self-priming interior paints, usually labeled “paint and primer,” are worth considering: They have a built-in binding agent that improves adhesion to the surface, and no separate primer coat is required. For those with busy lifestyles, hunting for the best interior paint primer and the best paint for walls takes more time than necessary. When buying the best paint-and-primer-in-one product, it’s a good idea to look at a reputable brand, such as Benjamin Moore or Sherwin-Williams. Since shoppers will only be buying and applying a single product, they will want to make sure it’s a top-quality interior wall paint.
Photo: Glenda Taylor
Our Top PicksBelow are the top interior paint performers from our hands-on testing. While they differ slightly in type—some are better suited to ceilings while others proved ideal for walls in children’s rooms—they all excelled in our tests. Whether they’re looking for a high-end paint for an accent wall or a hard-working one that will resist stains, shoppers will likely find it in this lineup of the best indoor paint for most projects.
Photo: sherwin-williams.com
SEE IT
The Sherwin-Williams SuperPaint line is one of the best paints for walls, and it’s popular with professional painters because of its superb coverage. With just one coat, this high-quality paint easily covered a circle we drew with a thick black marker on our drywall test board. We tested a color called Berry Frappe in a satin finish, and we were impressed with the high amount of pigment in this acrylic paint. After the recommended 4 hours, we added a second coat, and it dried to form a hard, smooth finish on the test board. This is a relatively thick paint with high viscosity.
SuperPaint is advertised as having “air-purifying” technology. While we can’t confirm that it purified the air, we can say that it had virtually no odor. For anyone sensitive to typical paint fumes, consider trying this low-VOC paint.
We gave the painted swatch 2 weeks to cure completely and then sprayed all-purpose cleaner on the painted area and scrubbed with a white rag. No paint color came off on the rag, so we deemed it to be indeed scrubbable.
Using a roller, we also tested how SuperPaint went on a larger drywall sheet. We found it easy to apply—no runs and no globs—and it smoothed out as it dried, so there were no visual stipples (texture) left behind from the roller.
In terms of downsides, SuperPaint is pretty pricey and it’s only available at Sherwin-Williams stores, although users can order online and then pick the paint up locally.
Product Specs
- Best application area: Walls
- Coverage: 350 to 400 square feet/gallon
- Low VOC: Yes
Pros
- Superior coverage
- Highly resistant to wear
- Excellent finish quality
Cons
- Expensive
- Available only at Sherwin-Williams stores
Get the Sherwin-Williams SuperPaint interior paint at Sherwin-Williams.
Photo: homedepot.com
SEE IT
Good-quality paint can be costly, but we found that Glidden Premium interior paint in an eggshell finish provided coverage as good as some of the more expensive brands we tested—at a more reasonable price. Glidden Premium is a combination paint-plus-primer product, so we expected it to cover well, and it did. After applying a single brushed-on coat, we could no longer see the black permanent marker circle we’d drawn on the test board. This may have been partially due to the dark tone of paint we tested, called Royal Indigo, but it was still impressive. We repainted the test board after 2 hours—the time recommended by the manufacturer—although we felt a single coat would have been sufficient. We also rolled the paint on a larger drywall sheet, and it went on smoothly and uniformly.
Now for the minor downside: After waiting 2 weeks for the paint to dry and harden completely, we sprayed on a little all-purpose cleaner, scrubbed the surface with a white rag, and found a slight purple stain on the rag. That indicated some of the paint was rubbing off—not much, but enough to see the color. The paint’s finish still looked good after it dried. We could not tell the difference where we’d scrubbed.
We feel this Glidden product is still an excellent paint, especially because it comes at an affordable price point. It offers great coverage and a smooth finish. Because we removed some of the color with a rag, however, we suggest using this paint in adult bedrooms rather than children’s bedrooms or playrooms where it might not hold up to frequent scrubbing.
Product Specs
- Best application area: Interior walls
- Coverage: Up to 400 square feet per gallon
- Low VOC: Yes
Pros
- Affordable
- Good coverage
- Goes on smooth and even
Cons
- Not impervious to scrubbing
Get the Glidden interior paint at The Home Depot.
Photo: sherwin-williams.com
SEE IT
We really liked the finish we achieved with Sherwin-Williams Emerald interior paint—the color was so rich and bold, and the surface was almost velvety to the touch. We tested this paint in Ripe Berry, in an eggshell finish that Sherwin-Williams oddly calls “Eg-Shel. ” It went on uniformly with both a roller and a paint brush. The first brushed-on coat completely covered the permanent marker circle. To be fair, Ripe Berry is a pretty deep shade, so we can’t be sure a lighter shade would have covered the marker quite as well. We applied a second coat as recommended after 4 hours and then let it dry for 2 weeks before spraying with all-purpose cleaner and wiping it with a white rag. No paint color came off on our rag.
This is low-VOC paint, and while we detected a faint odor, it didn’t bother us. One of the nicest things was the way this paint self-leveled to a very smooth surface. Even when we took the test board outdoors in the sunlight to examine it closely, we couldn’t make out any brush marks. Impressive
Emerald is a pricey paint, but we feel it’s among the best low-VOC interior paint options. It imparts a high-end look and feel and is washable to boot. There are more than 200 colors in the Emerald Designer line, so there’s a color for every taste. The way the paint self-smooths may just make a DIY paint job pass for one by a professional painter.
Product Specs
- Best application area: Walls
- Coverage: 350 to 400 square feet per gallon
- Low VOC: Yes
Pros
- Excellent coverage
- No visible brush marks
- Scrubbable
Cons
- Pricey
- Slight paint odor
Get the Sherwin-Williams Emerald interior paint at Sherwin-Williams.
Photo: homedepot.com
SEE IT
Kitchens, bathrooms, and laundry rooms tend to be high-moisture areas, so it’s always best to paint them with washable, moisture-resistant paint. We found that Behr’s Premium Plus Enamel fit the bill. This is a combo paint-plus-primer, and it covers well—we could only see a faint outline of our permanent marker circle on the test board after the first coat of Premium Plus, which was in a satin finish and a mid-purple tone called Unimaginable. After waiting the recommended 2 hours, we added a second coat, and we couldn’t see a trace of the marker.
This is a relatively thick paint, but it went on smoothly when using a brush on the test board and when rolling on a larger drywall sheet. When the second coat dried, we could barely see the brush marks—it smoothed out so nicely. We did detect an odor when applying Premium Plus, but it is a low-VOC product.
In the scrubbability test, we got a faint hint of the paint color on our white rag—barely enough to be noticeable. Behr also boasts something new: a pourable funnel that fits right on the can lid. Typically, after pouring paint from a can into a roller pan, the paint runs down the side of the can and makes a mess. With Behr’s new funnel lid, we had no drips or mess. We hope other manufacturers follow suit.
Product Specs
- Best application area: Walls, trim, cabinets
- Coverage: 250 to 400 square feet per gallon
- Low VOC: Yes
Pros
- Affordably priced
- No-mess pouring funnel
Cons
- Detectable paint odor
Get the Behr Premium Plus interior paint at The Home Depot.
Photo: sherwin-williams.com
SEE IT
Painting over walls that have stains can be frustrating if the paint dries and the old stains bleed through. Duration Home paint from Sherwin-Williams is designed to block stains, and it’s also formulated to resist new stains and mildew. While we didn’t have a way to test whether it genuinely discourages mildew growth, we can verify that a single coat of Duration Home on our test board completely covered the circle we’d drawn with a permanent marker.
We tested a color called Morning Glory in a semi-gloss finish. This combo paint-and-primer product goes on smoothly and evenly with both brush and roller. The manufacturer doesn’t recommend a second coat, and we felt one coat was sufficient—as long as we applied it liberally (not so much that it ran, but enough to form a reasonably thick layer). We didn’t skimp, so we didn’t have to add a second coat.
We waited 2 weeks before spraying it with an all-purpose cleaner and rubbing it with a white rag. We didn’t find any coloring at all on our rag. This paint dries to a nice, hard finish that would be well suited to children’s bedrooms, playrooms, and family rooms.
Product Specs
- Best application area: Walls
- Coverage: 350 to 400 square feet per gallon
- Low VOC: Yes
Pros
- 1-coat coverage possible
- Washable
- Goes on uniformly
Cons
- Pricey
Get the Sherwin-Williams Duration Home interior paint at Sherwin-Williams.
Photo: sherwin-williams.com
SEE IT
Let the kids play! With Sherwin-Williams Emerald enamel on walls, doors, and trim, smudges and smears from little fingers wipe off with ease. We’ve used a lot of Sherwin-Williams paint over the years, but this was our first experience with their Emerald urethane-based enamel, and it won us over.
We tested Emerald in a deep tone called Clematis in a semi-gloss finish. The paint was pretty thick, which usually indicates good coverage, and with just one coat brushed on our test board, Emerald completely covered our permanent marker circle. We brushed on a second coat 4 hours later (the suggested wait time), and we also rolled the enamel on a larger drywall sheet. It rolled on smoothly and covered uniformly. Because this is an enamel often used on wood, we also brushed two coats of paint on a wood baseboard. Emerald created a hard, attractive, and durable finish on all three materials. We detected a mild odor during testing, but at less than 50 grams of VOCs per liter, Emerald enamel qualifies as low VOC.
The paint also excelled in our scrubbability test. After a week, we sprayed the painted test board with an all-purpose cleaner and scrubbed it with a white rag—no color came off on the rag. This is likely due in large part to the inclusion of urethane, which helps create a rigid, impermeable shell. Though a pricey paint, it’s excellent for those who want quality coverage, a uniform finish, and the ability to scrub the walls without removing the paint. We would suggest it for walls and trim in high-usage rooms.
Product Specs
- Best application area: Walls, trim
- Coverage: 350 to 400 square feet per gallon
- Low VOC: Yes
Pros
- Excellent coverage
- No visible brush marks
- Scrubbable
Cons
- Pricey
- Slight paint odor
Get the Sherwin-Williams Emerald interior paint at Sherwin-Williams.
Photo: homedepot.com
SEE IT
Ceilings are more challenging to tape and mud smoothly, so many builders apply a textured surface to ceilings. For the best finished look, flat ceiling paint is also used. We think Behr’s stain-blocking ceiling paint is worth considering.
It was the only paint we tested that came in white rather than a color, but white is traditional on ceilings. A single coat of Ultra ceiling paint didn’t entirely cover the circle we’d drawn on the test board with a permanent marker. We could still see the marker—but just faintly—after the second coat dried. We waited another 2 hours (recommended time between coats) and then applied a third coat. The directions on the can advise a third coat may be necessary. After the third coat dried, we could no longer see evidence of the marker—just a smooth, white surface.
After a 2-week wait, we sprayed the ceiling paint swatch with an all-purpose cleaner and wiped it off with a navy blue rag. We spotted a faint white color on the dark rag, but not enough to concern us. The Ultra ceiling paint dried almost as smoothly as the more expensive paints we tested, and we couldn’t discern any brush marks.
This is low-VOC paint, and we could not detect any odor from it at all. It was also mess-free to use, as it came in one of Behr’s new funnel-type paint cans that allowed us to pour it into the roller pan without the paint running down the side or dripping.
Product Specs
- Best application area: Ceilings
- Coverage: 250 to 400 square feet per gallon
- Low VOC: Yes
Pros
- Hides ceiling imperfections
- Low VOC and odor-free
- Dries smooth
- Blocks stains
Cons
- May take 2 or more coats to block stains successfully
Get the Behr Ultra interior paint at The Home Depot.
Photo: lowes.com
SEE IT
In our experience, oftentimes paint advertised as “one-coat” will need a second coat for full coverage. We were prepared for HGTV Home’s Infinity paint to need a second coat to cover the circle we drew in permanent marker on our test board. We were wrong. We brushed on a single coat—this paint-and-primer combo is relatively thick—and we could not see any evidence of the marker beneath the paint when it dried.
We were especially impressed because we tested a light-medium tone called Magical in a satin finish that we felt sure would show through. Typically only deep or dark colors cover stains with a single coat. We must mention that this is a Sherwin-Williams interior latex paint explicitly made for HGTV Home, and we can verify it lives up to Sherwin-Williams’ quality standards.
We left the paint swatch for 2 weeks to cure fully before spraying the surface with all-purpose cleaner and wiping it down with a white rag. None of the paint color came off on our rag. We also rolled the paint on a larger drywall sheet, and it went on evenly and covered well. We didn’t detect any odors from this low-VOC paint.
One slight downside, however: Both the rolled and the brushed-on paint left applicator marks—not large ones, but we could still see brush strokes and stipples from the roller. For that reason, users who apply this paint might get the best results by using a roller and following good painting techniques. These include applying the paint with a wool nap roller (costs more but worth it!), keeping a wet edge at all times, and using a very light touch on the wall.
Product Specs
- Best application area: Walls
- Coverage: 400 square feet per gallon
- Low VOC: Yes
Pros
- 1-coat coverage
- Combo paint and primer
- Made by Sherwin-Williams
Cons
- Slightly visible brush strokes
Get the HGTV Home interior paint at Lowe’s.
Our VerdictThe Sherwin-Williams SuperPaint interior paint came in as our top pick because it’s an all-in-one paint and primer that creates a lasting finish and durable surface that holds up to scrubbing. It’s popular among professionals and comes in a range of finishes and colors. However, the best type of paint for interior walls need not break the bank. Our Best Bang for the Buck pick, the Glidden interior paint, took top honors for a paint that offered excellent coverage in an affordably priced product.
How We Tested the Best Interior PaintsWe looked at more than three dozen brands and types of interior paints in selecting the ones to test. We considered brand reputation to an extent—it’s tough to beat the quality of Sherwin-Williams’ paint products, but we didn’t automatically eliminate other brands. We also looked at overall customer satisfaction and considered the paint’s versatility, usability, and price. Low-VOC products also piqued our interest, and fortunately, low-VOC paint technology has reached the point where most interior paints emit few fumes.
For the actual testing, we cut drywall into rectangular pieces and used painter’s tape to create a square in the middle. We drew a circle using a thick black permanent marker in the middle of each square. We applied the different paint products on each square via a paint brush. Our intent was two-fold: We wanted to see how many coats it took to conceal the drawn-on circle completely, and we were also looking for the degree of self-leveling—a term that refers to how smoothly and mark-free the paint dries. High-quality paints tend to smooth out well, while lower-quality paints can leave distracting brush marks.
We also used a roller to apply the same paints to a larger sheet of drywall to compare rolled-on coverage and to determine how much paint was needed to impart a uniform color on the drywall (no thin spots). With enamel paint, we also brushed it on a wood baseboard, as this formula is typically designed for hard-working trim and cabinets. We applied the number of coats recommended by the manufacturer, and then we examined the painted swatches to see how well the paint covered the drywall and camouflaged discrepancies.
We awarded points based on a rubric during each test and examination—the better the paint did on a test, the higher the points. After testing, we added each product’s points and averaged them, using the final figures and assessing the paint’s strongest points to categorize the top picks on our list.
FAQsBefore making a final selection, the following answers to frequently asked questions may provide additional insight into the optimal procedures for selecting the best type of interior paint for walls.
Q. What brand of paint do professional painters use?Benjamin Moore and Sherwin-Williams are two of the best-selling brands on the market among professional painters.
Q. What paint colors are best for bedrooms?The best colors for bedrooms are nonvisually stimulating hues such as blues and greens or cool grays and neutral creams. However, the best paint to cover dark walls is often another deep or dark tone.
Q. What type of paint makes a room look bigger and brighter?Light paint colors make a room look bigger and brighter.
Q. What is the 60-30-10 rule, and how do I use it to choose interior paint?This rule states that 60 percent of the room should be a dominant color, while 30 percent should be the secondary color or texture, and 10 percent should be an accent color. The room’s main color—the walls—should be 60 percent. Use the 30 percent or secondary color in the draperies, accent chairs, bed linens, or on an accent wall. The remaining 10 percent should be in the accent decor, such as wall trim and throw pillows.
Q. Should I paint my ceiling and walls the same color?Painting your ceiling and walls the same color will draw the eye up, creating the illusion of a larger room and higher ceilings. However, using a dark color can have the reverse effect and make a room look smaller and closed-in, especially if there isn’t enough natural light.
Why Trust Bob VilaBob Vila has been America’s Handyman since 1979. As the host of beloved and groundbreaking TV series including “This Old House” and “Bob Vila’s Home Again,” he popularized and became synonymous with “do-it-yourself” home improvement.
Over the course of his decades-long career, Bob Vila has helped millions of people build, renovate, repair, and live better each day—a tradition that continues today with expert yet accessible home advice. The Bob Vila team distills need-to-know information into project tutorials, maintenance guides, tool 101s, and more. These home and garden experts then thoroughly research, vet, and recommend products that support homeowners, renters, DIYers, and professionals in their to-do lists.
TOP-15 best models and which one to choose
One of the simplest and most affordable options for wall decoration is ordinary painting. For some time this method was considered obsolete, but now it has regained popularity.
High-quality wall painting not only improves their appearance, but also makes it easier to clean the house, because painted walls are very easy to clean and are resistant to moisture.
When choosing a paint, they are guided not only by its color, but also by the type of surface to be treated.
For example, there are separate paints for the walls of the bedroom, kitchen or bathroom, so be sure to specify what room it will be used for before buying.
We tried to make it easier for you to choose, and made a rating of the best wall paints according to the 2022-2023 version in terms of price / quality.
Rating TOP-15 best wall paints 2022-2023
Place | Designation | Price |
---|---|---|
TOP 3 best wall paints by price/quality for 2022-2023 | ||
1 | Dulux 3D White | Ask for price |
2 | V33 Renovation Perfection | Ask for price |
3 | Tikkurila Euro Power 7 (Base A) | Ask for price |
TOP 3 best water-based wall paints | ||
1 | FINNCOLOR Oasis Hall&Office | Ask for price |
2 | Lacra For walls and ceilings | Ask for price |
3 | Dulux Classic Color | Ask for price |
TOP 3 best acrylic wall paints | ||
1 | Aura Interior Mattlatex | Ask for price |
2 | Tikkurila Luja 7 | Ask for price |
3 | Yaroslavl paints YARKO For walls and ceilings | Ask for price |
TOP 3 best matte wall paints | ||
1 | Dulux Dazzling White washable matt | Ask for price |
2 | TEX Interior Universal matt | Ask for price |
3 | TEX for ceiling super white Profi matt | Ask for price |
Top 3 washable wall paints | ||
1 | TEX Super White Profi | Ask for price |
2 | Dulux Bindo 7 washable | Ask for price |
3 | FINNCOLOR Oasis Interior Plus waterproof washable | Ask for price |
0188
- Dulux 3D White
- V33 Renovation Perfection
- Tikkurila Euro Power 7 (Base A)
- FINNCOLOR Oasis Hall&Office
- Lacquer For walls and ceilings
- Dulux Classic Color
How to choose wall paint and what to look for?
The degree of resistance of the coating to aggressive environmental factors depends on the quality of the selected paint.
When selecting paint, they are guided by the following criteria :
- What kind of work is paint intended for? Wall paints are exterior and interior (interior). Compositions of the first type have increased resistance to precipitation and fading in the sun.
- Which room will be painted ? For the bathroom or kitchen, special types of paint are used with increased resistance to abrasion, moisture and high temperatures. Latex and silicone emulsions have such properties. For the bedroom and living room, bright and abrasion-resistant acrylic paints are suitable. Water-based compositions are environmentally friendly, so they are perfect for a children's room.
- What invoice to choose ? According to this criterion, all paints are matte, semi-matte, semi-gloss and glossy. Matte does not shine, so it perfectly hides surface defects. Semi-gloss have a barely noticeable shine and have increased resistance to abrasion, so they can be safely washed. Semi-gloss emulsions can be washed, so they are great for nurseries, kitchens and bathrooms. Glossy paint is the most brilliant and resistant to abrasion, but you need to work with it carefully, because it emphasizes all the surface irregularities.
Also, when choosing a paint, pay attention to such an indicator as hiding power . It depends on him whether the emulsion can paint over the old coating layer. The higher this indicator, the fewer layers of paint will have to be applied to obtain a perfectly even tone.
Another important factor is the abrasion resistance of . This characteristic is especially important if the walls will be painted in a high traffic area.
TOP 3 best wall paints by price/quality for 2022-2023
Repairs always require serious financial investments, but it is not worth saving on paint, because poor-quality painting will have to be refreshed regularly. It is better to give preference to emulsions in which high quality is combined with affordable cost.
Dulux 3D White
This water-based paint will make walls and ceilings dazzling white . Such a
coating perfectly diffuses light, enhances the radiance of white and visually expands the space.
The characteristic unpleasant odor of the paint is practically absent, making it ideal for interior work.
The emulsion is easy to apply on almost any surface, without leaving splashes and streaks . It can also be used for painting wallpaper.
Vapor permeability and moisture resistance of the product is not very high, so it is used for painting walls in bedrooms, living rooms, offices and other similar rooms.
In addition, the composition of the emulsion is completely safe, and the product itself is certified, and is suitable for use in children's and medical institutions .
It is also recommended for use in compact rooms with low ceilings, as the finished coating visually expands the space of the room.
Specifications :
- type - latex;
- texture - matte;
- maximum flow rate 13 l/sq.m;
- drying time 4 hours.
Pros
- matte texture perfectly hides wall defects;
- is practically odorless;
- dries quickly;
- perfectly covers other colors;
- the painted surface is perfectly washable.
Cons
- requires good surface preparation;
- many users complain about packaging defects.
V33 Renovation Perfection
This paint has been specially developed for wall finishing and furniture restoration . According to
performance characteristics, it is ideal for surfaces that are subjected to high mechanical stress.
The emulsion contains a unique combination of polymers and additive . Thanks to this, the coating has increased strength and resistance to stains and other contaminants. Due to the high resistance to abrasion, the dried surface can be safely washed.
The emulsion can be applied to almost any surface: metal, plastic, wall tiles, wood, drywall and general plaster .
In the process of painting, the composition lays down perfectly evenly, and the semi-matt texture well hides defects and surface irregularities.
The product is environmentally friendly and practically odorless, which makes it easier to carry out interior repairs, and the paint can be thinned with plain water.
Specifications :
- type - acrylic;
- texture - semi-matte;
- maximum flow rate 13 l/sq.m;
- drying time 24 hours.
Pros
- suitable for furniture restoration;
- lays down perfectly flat;
- covers the old paint well, even if it is in a contrasting color;
- can be washed;
- is suitable for application without prior surface preparation.
Cons
- some users consider the price too high;
- takes a long time to dry.
Tikkurila Euro Power 7 (Base A)
Paints from this Finnish manufacturer are distinguished by adequate cost and high quality .
The emulsion is water-dispersion, so you don't have to use solvents to get the desired consistency: just dilute the paint with water. The texture of the product is matte, so even uneven walls can be painted with it, because the finished coating perfectly hides any defects or irregularities.
The product also has a certificate that allows you to carry out painting work in children's and health institutions .
The composition has sufficiently high moisture resistance and vapor permeability, so the paint can be used for finishing rooms with normal and moderate humidity.
The composition of the emulsion is universal, so it can be applied to concrete, plaster, putty, plasterboard structures and wooden surfaces.
Specifications :
- texture - matt;
- maximum flow rate 12 l/sq.m;
- drying time 2 hours.
Pluses
- reasonable cost with excellent quality;
- rich selection of tinting colors;
- does not have an unpleasant odor;
- dries quickly;
- is suitable for a wide variety of surfaces, including wood.
Cons
- low hiding power;
- must be diluted with water.
TOP 3 best water-based paints for walls
Water-based paints can be easily diluted to the desired consistency with ordinary water, the composition itself lays down perfectly evenly, and an unpleasant odor does not appear during painting work. Three models were recognized as the best water-based wall paints in 2022-2023.
FINNCOLOR Oasis Hall&Office
This water-based paint with a deep matte texture is very easy to apply and creates a perfectly even and high-quality finish .
According to its composition, it is suitable for wall decoration in dry and damp rooms, but the emulsion is not suitable for bathrooms due to insufficiently high resistance to moisture.
The paint can be used on pre-prepared and uneven surfaces. In the latter case, the consumption will increase slightly, but the layer still turns out to be perfectly even and smooth.
The emulsion also boasts a fast drying time of no more than 2 hours .
However, if multiple coats are required, you will have to wait until the previous one is completely dry.
The paint has a high resistance to abrasion, but the desired level of resistance required for washing is reached only after 4 weeks .
If the room is cool and humid, the final drying time may be slightly longer.
Specifications :
- texture - matt;
- maximum flow rate 11 l/sq.m;
- drying time 2 hours.
Pros
- suitable for painting various surfaces, including untreated ones;
- perfectly hides wall defects;
- dries quickly;
- has high abrasion resistance;
- is almost odorless.
Cons
- inconvenient to pour into another container;
- does not cover old paint when applied in one coat.
Lacra For Walls and Ceilings
This inexpensive but high-quality home-made paint is of the water-dispersion type, so the user simply needs to dilute it with water to obtain the desired consistency .
After application and drying, the emulsion forms an even and durable coating that can be washed.
The composition also boasts excellent adhesion, so the paint can be applied not only on perfectly smooth walls, but also on porous surfaces that have not been pre-treated.
The paint has good hiding power, so it can be applied over old layers of paint, even if it has the contrast color .
The texture of the product is matte, so the emulsion perfectly hides any defects and surface irregularities. After complete drying, the surface will be easy to care for, because the painted walls can simply be wiped with a dry cloth.
Specifications :
- texture - matt;
- maximum flow rate 8 l/sq.m;
- drying time 2 hours.
Pros
- dries quickly;
- hides uneven walls very well;
- can be applied without prior surface preparation;
- moderate consumption;
- good hiding power.
Cons
- not suitable for damp rooms;
- cannot be washed with a damp sponge.
Dulux Classic Color
The price of this paint belongs to the middle price category, and its composition is thought out in such a way that the emulsion can be applied quickly and perfectly evenly .
The type of product is acrylic paints, which have excellent vapor permeability and moisture repellency, so the emulsion can be used for wall decoration in the kitchen or bathroom.
Since the paint is matt, it perfectly hides surface imperfections, so may not be leveled before applying the wall.
Another feature of the product is that the finished coating does not change color over time, and a wide selection of colors allows you to choose the right shade.
The paint also has no unpleasant odor, which makes it possible to carry out painting work even indoors .
The emulsion does not run or splatter during application, is economical and has excellent hiding power, so it can be safely applied over an old layer of paint in a contrasting color.
Specifications :
- texture - matt;
- maximum flow rate 14 l/sq.m;
- drying time 4 hours.
Pros
- matte texture hides all defects;
- is suitable for painting raw surfaces;
- dries quickly;
- does not have an unpleasant odor;
- rich selection of colors.
Cons
- costs a little more than analogues;
- the painted wall can be washed only after a month.
TOP 3 Best Acrylic Wall Paints
Acrylic paints are commonly used for wall decoration in bathrooms and kitchens because they are highly resistant to steam, moisture and high temperatures.
Aura Interior Mattlatex
This paint is ideal for walls in damp areas .
It can also be used to paint walls in rooms where regular damp cleaning is required.
Another feature of the product is that it can be used not only for painting unfinished surfaces, but also for resurfacing an old layer of paint.
The emulsion has good hiding power, so even two coats will be enough to cover even a dark layer of old paint.
The paint itself has a perfectly white color, and the matte texture allows you to perfectly hide defects and irregularities on the walls. If you need to paint the walls in a different color, you can add color to the main tone.
In addition, the product has a special certificate that allows it to be used even in children's and medical institutions .
When carrying out painting work, the user will not experience discomfort, since the characteristic unpleasant smell of paint is practically absent.
Specifications :
- texture - matt;
- maximum flow rate 12 l/sq.m;
- drying time 4 hours.
Pros
- wide range of colors;
- hides wall defects well;
- dries quickly;
- adequate price;
- is suitable for painting raw surfaces.
Cons
- when painting uneven walls, the consumption increases;
- must not be thinned with water.
Tikkurila Luja 7
High-quality paint from a well-known Finnish manufacturer will help you quickly renovate your house or refresh the walls in rooms .
Acrylic paint, and its composition includes a special anti-mold component, which provides additional protection of the walls from moisture.
Given these characteristics, the emulsion is excellent for painting walls with high humidity, such as kitchens or bathrooms.
In addition, the paint is very resistant to abrasion and aggressive chemicals .
Thanks to this, painted walls can be washed with almost any detergent and disinfectant.
Since the texture of the paint is matt, even unfinished surfaces can be finished with it. .
The consumption of the agent will increase in this case, but the finished coating will be perfectly even and smooth.
Specifications :
- texture - matt;
- maximum flow rate 8 l/sq.m;
- drying time 4 hours.
Pros
- reliable European manufacturer;
- resists the formation of mold and mildew;
- painted walls can be washed with any disinfectant;
- no characteristic unpleasant odor;
- excellent hiding power.
Cons
- when painting untreated walls, consumption increases;
- costs a little more than analogues.
YARKO Yaroslavl paints For walls and ceilings
High-quality matte paint from a trusted domestic manufacturer will help make cosmetic repairs or refresh walls in rooms with high humidity .
It can also be used for wall painting, and painting work will be carried out quickly, as the paint does not flow and does not leave streaks when applied. The finished coating "breathes", and the paint itself has practically no unpleasant odor, so painting work can be carried out at any time of the year.
The paint has a high hiding power, so it can be safely used on walls in the contrasting color .
This will require two coats of emulsion, but the painting work will not be delayed.
Each coat of paint dries completely in just 1 hour, after which a second coat of can be applied.
The emulsion is also considered universal, as it is suitable for processing treated and untreated walls made of different materials.
Specifications :
- texture - matt;
- maximum flow rate 8 l/sq.m;
- drying time 1 hour.
Pros
- reasonable cost with high quality;
- dries very quickly;
- lays evenly and evenly on any surface;
- is suitable for painting rough walls;
- low consumption.
Cons
- smell;
- is not a very rich choice of colors.
TOP 3 best matte wall paints
Matte paints are ideal for decorating rooms with uneven walls, as they perfectly mask various defects and irregularities. Given this feature, before carrying out painting work, the walls can not be leveled.
Dulux Dazzling White Washable Matt
This matt wall and ceiling paint is in perfect white . The
product contains natural marble particles, thanks to which the painted surface reflects light much better.
As a result, the room appears visually more spacious and the ceilings appear taller . Thanks to this, the paint is ideal for renovations in small apartments or rooms with low ceilings.
Also, the paint does not have an unpleasant odor, does not flow or splash when applied, which greatly facilitates painting work.
In addition, the emulsion has excellent hiding power, so it can be applied not only on prepared surfaces, but also on walls that have already been painted before .
Since the paint lays down evenly and dries quickly enough, even dark wall colors can be covered with it. The product is certified, so it can be safely used in children's and medical institutions.
Specifications :
- thinner - water;
- maximum flow rate 13 l/sq. m;
- drying time 4 hours.
Pros
- suitable for walls and ceilings;
- excellent hiding power;
- does not stain;
- does not splatter or run when applied;
- has no unpleasant smell.
Cons
- dries a little longer than analogues;
- is not a very rich choice of colors.
TEX Interior Universal matt
Snow white interior white paint is ideal for painting walls in almost any room.
It forms a "breathable" coating through which steam and hot air penetrate, so the paint layer does not deteriorate for a long time. Another feature of the emulsion is that it is very easy to apply, does not leave streaks and does not spread. Since the texture of the paint is matte, it perfectly masks bumps and defects.
This reduces repair times as the walls do not have to be pre-prepared .
The paint color is perfectly white, but if the user wants to paint the walls in a different color, he can add a special color to it.
Paint consumption is low, but when painting on untreated surfaces it increases slightly .
Another feature of the product is its fast drying time and the almost complete absence of an unpleasant odor.
Specifications :
- thinner - water;
- maximum flow rate 8 l/sq.m;
- drying time 1.5 hours.
Pros
- low price;
- matte texture perfectly masks defects;
- dries quickly;
- low flow;
- increased hiding power.
Cons
- does not roll well;
- is not compatible with all colors.
TEX for ceiling super white Profi matt
High-quality wall paint from a domestic manufacturer will help you quickly carry out cosmetic repairs in residential premises .
Since the product is certified, it can even be used in children's and medical institutions.
After painting, a perfectly even and dazzling white coating is formed, and the matte texture perfectly masks any surface irregularities and defects.
Can be applied with a regular brush or roller . It does not drip, splatter or spread, so painting will not cause any discomfort.
Another feature of the emulsion is that it visually increases the area of the room and makes the ceilings higher, so it is ideal for renovation work in small rooms or rooms with low ceilings.
Specifications :
- thinner - water;
- maximum flow rate 12 l/sq.m;
- drying time 1 hour.
Pros
- affordable price;
- matte texture perfectly masks defects;
- applies quickly and evenly with a roller;
- can be washed;
- improve abrasion resistance.
Cons
- not very high coverage;
- bald spots remain.
TOP 3 best washable wall paints
For refurbishment of rooms in which you often have to wash the walls, you should choose special washable wall paints. They have a special composition that increases the resistance of the coating to abrasion, and allows you to wash the walls and ceiling with a damp sponge.
TEX super white Profi
High-quality and inexpensive interior paint of domestic production will help to quickly update the room .
Since the emulsion has a matte texture, it fits perfectly on any surface and masks all defects and uneven walls. Also, the product boasts excellent covering properties.
Thanks to this, the paint can be applied not only to untreated surfaces, but also to walls that have already been painted with .
The consistency of the product is very good, so the paint does not drip or splatter.
It can be applied with a regular brush or roller without fear of unsightly strokes or bald spots on the surface. .
The original paint color is white, but if the user wants to paint the walls or ceiling in a different color, he can create his own shade by adding color.
Specifications:
- thinner - water;
- maximum flow rate 10 l/sq.m;
- drying time 1 hour.
Pros
- low cost;
- good hiding power;
- does not splatter when applied;
- perfectly hides wall defects;
- dries quickly.
Cons
- consumption increases when applied to unfinished walls;
- there is an odor.
Dulux Bindo 7 washable
Latex paint from a well-known manufacturer is suitable for almost any room, but the manufacturer recommends using it for finishing walls and ceilings in rooms with a high operating load .
The paint is suitable for finishing children's and medical facilities, as it has the appropriate certificate. The special consistency provides convenient application of paint without splashes, streaks and bald spots.
In addition, the paint is practically odorless, so the user will not experience discomfort even during long-term painting work .
Since the paint is latex, it can be used to paint walls in bathrooms and kitchens.
The finished and completely dried layer is resistant to abrasion, so the painted walls can be washed with a normal damp sponge and fairly aggressive chemicals.
Specifications :
- type - latex;
- maximum flow rate 14 l/sq.m;
- drying time 4 hours.
Pros
- applies evenly and does not splatter;
- is suitable for wet areas;
- the finished coating can be washed;
- is suitable for all surfaces;
- dries quickly.
Cons
- some users find the price too high;
- there is an odor.
FINNCOLOR Oasis Interior Plus moisture resistant washable
The texture of this paint is deep matte, so with its help you can safely mask any defects and surface irregularities .
The color of the emulsion is white, but the user can add color to it to change the shade. The composition of the paint includes a fungicide, so it can be safely used not only for dry, but also for wet rooms.
After the layer has dried, the paint is not covered with mold and fungus, so a healthy microclimate will reign in the room .
Suitable for all surfaces, including uneven wood and porous concrete.
In addition, the emulsion has excellent hiding power, so it can be used to refresh old paint or even mask dark tones.
Specifications :
- thinner - water;
- maximum flow rate 11 l/sq. m;
- drying time 2 hours.
Pros
- low price;
- contains a fungicide;
- lays down quickly and evenly;
- can be painted on any surface;
- perfectly masks defects and irregularities.
Cons
- high flow;
- has an unpleasant odor.
Which company to choose?
There are a lot of manufacturers of paints and emulsions, and we have tried to include the products of the most reliable and trusted brands in the rating.
In 2022-2023, Dulux, Tikkurila, FINNCOLOR, Lakra, Aura, Yaroslavl paints and TEX were recognized as the best wall paint manufacturers.
Customer Reviews
Brand/Model Rating
Number of voters Add your review!
Sort by: Most RecentHighest ScoreMost HelpfulWorst Rated
Be the first to review.
{{{ review.rating_title}}}
show more
Add your review!
Useful video
From the video you will learn how to choose wall paint:
The best wall paint: review, properties and comparison.
At the final stage of renovation, we are faced with the task of giving the walls a beautiful look. Some choose wallpaper, some prefer decorative plaster, but most paint the walls. And it's true, it's fast, stylish and good! The question arises: how to choose paint so that it satisfies you both in terms of quality and price? Let's try to figure this out together. We consider only harmless, water-dispersion paints.
- Paint classes. What do they tell us?
- Gloss level and unique color features, which one is best for walls?
- Best wall paint selection chart
Paint grades, which one is better to paint?
There are always certain factors that you should pay attention to when choosing a paint. These include wet abrasion class, coverage and wear resistance class, gloss level, unique features and of course price. The buyer can always find all quality indicators in the technical sheets for the products. However, we add on our own that the standards of each country may differ from each other and it is best to judge by the generally accepted European DIN classification (Well, or just check with us). Let's get back to the topic and go through the meaning of these characteristics:
- Wet Abrasion Rating is a measure of a coating's ability to withstand mechanical impact with water. It is determined in laboratory conditions by the degree of wear of the coating as a result of simulating the washing procedure. The highest is class 1, the lowest is class 5. Therefore, if this indicator is important for you (and on the walls this is one of the determining factors), then choose 1 or 2 class.
Where is the best place to use paint with this grade? class 1 - for medical institutions and for rooms with cleaning with disinfectants. Class 2 - for walls and ceilings in bathrooms, kitchens and other rooms with high humidity, able to withstand repeated wet cleaning. Class 3 - for walls and ceilings in the interior of residential premises, wet cleaning of the painted surface will also not hurt. Grade 4 - paint for ceilings. Grade 5 - the cheapest paint, which is very similar to classic whitewash and has the appropriate quality.
Wear resistance class - a physical property that characterizes the resistance of the paintwork to abrasion, is one of the main parameters that determine the durability of the paint. This indicator is related to the wet abrasion class, but wider. So it will also include temperature loads, adhesion with the previous layer and wear of the material over time.
Spreading power (coverage) class - more important for work and consumption calculations. This is an indicator that characterizes the ability of the paint to overlap the existing surface. The lower the class, the better. As a rule, paints with good wear resistance also have good hiding power.
Gloss level and unique paint features, which one is best for walls?
Gloss level is the ability of the paint to shine, reflect light. But gloss is not only glitter. Glossy paints contain more resin than pigment, while matte paints do the opposite. The coating that forms the glossy paint is easy to clean and more durable. This type of paint is ideal for rooms with high humidity. You can get a semi-gloss or even a semi-matte paint that is suitable for the bath and will please you for a long time. Pure matte paints are not intended for surfaces that need constant washing. Therefore, they are usually more often used for ceilings. A significant advantage of matte paint is its ability to hide defects on any surface. While glossy paint will only emphasize the slightest scratch or unevenness.
Here it is important to add that resistant matte paints exist, and we will consider many of them below. However, the cost of their production is high, which is why such paints are not cheap for the buyer.
The unique features of are those features that the paint can boast of, which makes it stand out from the rest. For example, universality for walls and ceilings, double coverage, antiseptic properties, high degree of whiteness, anti-allergic properties, etc. If a number of specific properties are important to you, it is better to ask a store specialist +375(29)230-00-80 MTS or +375(44)597-00-80 A1.
Best Wall Paint Selection Chart
Name: | Wet rub grade: | Spreading class: | Wear resistance: | Gloss level: | Price per liter* | Features: |
Caparol Amphibolin | Grade 1 | Grade 2 | Very hardwearing | Silky matt | 35. 50 RUB | Multi-purpose facade and interior paint. It is well washed with water, resistant to disinfectants |
Betek Max | 1 Class | 2 Class | 25.06,036 | is characterized self-distributing texture. | ||
CAP ArreGhini K81 Universale | 1 class | 1 Class | Bashenous | Matte | 26.40 RUB | Universality, Highly STRICTIONS OF THE OF|
Farby KABE Prolatex | Grade 1 | Grade 1 | Hardwearing | Matte | RUB 31.32 | Indoor use only, highest wash and abrasion resistance, recommended for use in high traffic areas. |
FARBY Kabe Profilatex | 1 Grade | Grade 1 | Very wear-resistant | Silki-dentum | Confirmed antiseptic properties, used in the "SUMM wet rooms. One of the most wear-resistant paints. | |
Teknos Superlatecsi | 1 class | 2 Grade | Better-resistant | Milky-dentum | 900 Also for radiators and pipes, galvanized air conditioning ducts, for concrete bases.||
Tikkurila Luja 7 | Grade 1 | Grade 2 | Wear Resistant | Silky matt | RUB 32.88 | The paint contains an anti-mold component and is approved for painting premises of food industry enterprises. |
Tex-Color DoppelDecker 1 | 1 Class | 1 Grade | Very wear-resistant | Deep-dentum | 22.50 rub | for walls and ceilings with two-time crumbling, highly redness. Does not contain components that form a dark coating. |
* - Prices are for December 2020 and may differ from the current ones.
Summarizing all of the above, we want to emphasize that for each individual task there is its own ideal wall paint.