Home » Misc » Turn off bedroom light

Turn off bedroom light


How to Turn Off Bedroom Light? (Explore Easy Ways) – Automate Your Life

At the end of a stressful day, it’s so difficult to get up from bed to turn off the lights. For our convenience, we want a smart home. 

Install the Kasa app and connect it with the smart switch. Now, you can turn the lights off with just one click. You can also use smart plugs and smart lights.

You can also give voice commands by connecting with Alexa and Google Home.

This article discusses how to turn off the bedroom lights without getting up from the bed.

Keep reading!

Page Contents

What is an automatic room lighting system?

It’s a micro-controller-based lighting system that allows you to have more control over the light settings in your house.

With the help of smart devices and a good automatic lighting system, you can set timers, dim lights, save energy, and remotely turn them on and off no matter where you are. You can even add more sensors and other features.

How does an automatic light sensor work?

Automatic light sensors are triggered by motion and can automatically dim, turn on or turn off your lights.

Whenever a person or object passes by an automatic light sensor, it will automatically turn on or perform your desired setting. Some other light sensors also use changes in body temperature or sounds as triggers for the sensors.

Use Smart Light Switch

Use a smart light switch to turn off your lights without getting off your bed. It doesn’t matter how many bulbs you’ve in a room. You can connect them with one smart light switch.

You can also choose smart lights, but they would be challenging to use compared to one smart light switch.

If you’ve four ordinary bulbs and now you want to change them with smart lights, it’ll cost you a lot. You must spend at least $35 to $45 on replacing these lights. Buying a smart light switch will cost you only $19.

Use Kasa smart light switch by TP-link.

What Other Things are Required to Setup Smart Light Switch?

First, buy a smart light switch from a known brand. I recommend you to use Kasa smart light switch by TP-link. It’s incredibly cheap and very reliable.

There are other brands in the market, but I suggest you use Kasa smart light. These switches require a neutral wire to set up the system.

Use a different smart light switch if you don’t have a neutral wire. You can use the Lutron Caseta smart home dimmer switch in this case. It is a little expensive.

Download Kasa smart app on your mobile. The Kasa app will connect to your smart lights. You can switch smart lights by clicking a button on your phone.

You also need a stable Wi-Fi connection for this setup. If you use Lutron Caseta smart home dimmer switch, you also need Lutron Smart Switch. 

How to Setup a Smart Light Switch?

Keep in mind that you’re working with electricity. You’ve to take some precautionary measures before doing some electrical work. This will save you from danger and change the switch easily.

Connect Your Smart Switch with a Speaker

You may link your smart light switches with your smart speakers if you want to take this automation a step further.  

This method allows you to switch off your bedroom lights without even using your phone. You can simply ask Google to do so.

You can use Google App or Alexa for this purpose.

How to Connect the Smart Light Switch with the Google App?

Follow the given steps to connect a smart light switch with the Google app;

  1. Open Google Home App.
  2. Tap on “Assistance settings.”
  3. Click on the “+ Add” option.
  4. Press on the “Link the smart home device” option.
  5. Enter “Kasa” in the search box, then select “TP-Link Kasa.”
  6. The login page for Kasa Smart will then appear. 
  7. Enter the email address and password of your Kasa Smart account.
  8. Now, your device should appear on the google home page.
  9. Try asking Google to switch off your lights to check if the system is working or not.

How to Connect the Smart Light Switch with the Alexa?

The personal digital assistant from Amazon is called Alexa, and it allows you to use voice recognition features to operate compatible devices.

Follow the given steps to connect a smart light switch with Alexa;

  1. Download Alexa App on your mobile.
  2. Click the “Menu” option.
  3. Then, click on “Skills and Games.”
  4. Press the magnifying glass at the top right of the page.
  5. Enter “Kasa skill” and choose TP-LINK Kasa to activate that skill.
  6. Try asking Google to switch off your lights to check if the system is working or not.
The personal digital assistant from Amazon is called Alexa

Linking the Smart Switches and Bulbs through Google App

You can utilize smart plugs for the lighting next to your bed. Smart plugs make ordinary bulbs into smart lamps that are inexpensive and simple to use. You can utilize a smart bulb for the light in your closet.

You can manage all these smart devices with a single command. You can group them using Google Home App or Alexa.

  1. Open Google Home App.
  2. Press the “+” symbol. You’ll find it at the top left.
  3. Select the ‘Setup Device’ option.
  4. Then, configure any new devices.
  5. Choose the “Home” option.
  6. Then, Google will try to find your Device.
  7. You can choose the room you want your device to be added to once.
  8. Choose “Bedroom.” After adding all of your gadgets to the “Bedroom,” you should be able to turn them off simultaneously.

Linking the Smart Switches and Bulbs Through Alexa

Once everything is set up, you should group all of these items and give the group the name “Bedroom.” 

In this manner, the smart light switch, smart plugs, and smart bulb will turn off simultaneously when you ask Google to turn off the lights in the bedroom.

Let’s see how we can group them through Alexa;

  1. Open Alexa App on your mobile.
  2. Click on the “Devices” option. 
  3. Then, press the “+” symbol.
  4. Select the option “Add Group.”
  5. Select the desired group name.
  6. Press “Next.”
  7. Select the smart devices you want to group.
  8. After adding all of your gadgets to the group, you should be able to turn them off simultaneously.
See How To Turn off Your Bedroom Lights

How to Turn Off Your Bedroom Lamp Using a Remote?

It might be challenging to choose which smart remote to buy because there are so many on the market.

Any smart remote can turn off your lamp or bedroom lights. Point the remote at the lamp and push the “off” button to switch off the bedroom light without getting out of bed.

Due to the built-in timer, you can automatically turn off the bedroom light after a particular time without getting out of bed.

Which Smart Bulbs are Best to Use?

A smart bulb is an internet-capable LED light bulb. Smart bulbs are among the most successful items in emerging Internet of Things (IoT) technologies.

You can turn them off with just one click or by voice command. The smart light bulbs will elegantly illuminate your house with the click of a button.

Serial No.Smart Bulb NameBrightnessAvailable AtLifetimeWorks with 
1Philips Hue White And Color Ambiance800 lumensAmazon25,000 hoursAlexa
2Wyze Bulb800 lumensAmazon25,000 hoursAlexa
3Sengled Smart Wi-Fi LED800 lumensAmazon25,000 hoursAlexa
4Sengled Smart LED with Motion Sensor1050 lumensAmazon25,000 hoursAlexa, Google Assistance
5Ring Solar Pathlight80 lumensAmazonBattery-operatedAlexa
6Lifx Mini650-800 lumensAmazon200,000 hoursAlexa, Google Assistance
List of smart bulbs

What is Better Alexa or Google Home?

Google home and Alexa are both excellent platforms. A wide range of affordable and premium speakers are available in the market.

For home integrations, I prefer using Alexa. Thousands of smart devices connect with Alexa. Alexa is compatible with TP-Link Plugs and Philips Hue lights. 

That said, Alexa can’t respond to more than one voice at a time.

You can give it several instructions to google at a time.

What are the Pros and Cons Of Google Home?

Google may not work with many devices but is compatible with third-party products. You can give it several instructions to google at a time.

As I’ve already mentioned, Alexa outperforms Google Home regarding third-party smart device support.

Conclusion

Related Articles

Click here to view the Visual Story Version of this Article.

How to Turn On and Off the Bedroom Light Without Leaving Bed

Disclosure: We may get commissions for purchases made through links in this post.

Are you looking for a way to turn off your bedroom lights without getting up? It could be that you are always tired after a long day at work or school. In that case, you don’t want to be bothered getting out of bed to turn off the light. So how to turn on and off the bedroom light without leaving the bed?

Home automation is the best way to turn on and off your bedroom lights remotely. Using Siri, Alexa, or Google, you can use voice commands to control your lights. This also works for all the other electronic devices in your home. However, if you don’t have the budget for home automation, there are other ways you can do this using the following items:

  1. Long Stick
  2. A Piece of String and a System of Pulleys or Hooks
  3. Nerf Gun
  4. 3-way Switch
  5. Clapper Switch
  6. Remote Controlled Light Switches
  7. Home Automation

Read on to learn more about different ways to turn on and off the bedroom light without leaving the bed.

How to Turn On and Off the Bedroom Light Without Leaving Bed

Understandably, you don’t want to get up from bed after a tiring day. However, getting a good night’s sleep with the lights on can be hard.

What if you are unfortunate enough to have the light switch on the other side of the room? Then there are lots of creative ways to turn off the lights remotely.

Of course, automating your lights is the best way to go about this task. However, you can rest assured that other solutions are worth checking out, too.

Here are some of the classic solutions that would still work today. If you do not want a robot constantly listening in your house, these analog solutions are ideal for you:

1. A Long Stick

If you have a rocker switch, you can turn the light on and off using a long stick. Just poke at it using a stick or pole that is long enough to reach it. This will be easy if the switch is just five feet away. However, it will take a bit of skill to do this if the light switch is far away.

This has been a tried and tested method used by many generations of teenagers, and it remains popular today.

2. A Piece of String and a System of Pulleys or Hooks

This will require a bit of preparation, but it does work. Note that this will only work if you have a toggle light switch and a lever.

First, you need to attach the end of the string to the end of the light switch. You might need to use a bit of hot glue to ensure the secure attachment of the string. Test the strength of the connection by pulling the string to turn the light on and off.

If the string is strong enough and hot glue has set, attach the pulleys or eye hooks to your ceiling. The first hook should be directly above the light switch. This will ensure that the string will pull the string straight up.

After that, attach more eyehooks to your ceiling going to your bed. Insert the string through the eye hooks, leaving enough length at the end that you can reach from your bed. You might want to put a bit of weight at the end to keep the string in place.

The only problem with this setup is that you cannot turn the light on. It will only work one way.

3. Nerf Gun

You need to be a crack shot to pull off this technique. If you are confident with your marksmanship, you can shoot a Nerf dart at the light switch. This is to turn it on and off from across the room.

However, you need to have a large rocker switch to make this work. A toggle switch is too small and hard to move using a Nerf gun. Also, if you are exhausted, you might not even be able to aim the Nerf gun properly.

Now, as you can probably tell, these first three techniques are gimmicky. They also require some skills to pull off. But these were actual solutions before technology evolved enough to make these techniques into relics of the past.

The next techniques are some of the more viable options you can use today.

4. 3-way Switch

This is quite complex, but it lets you turn on the bedroom light from the comfort of your bed. A 3-way switch is a system of two analog switches that will allow you to turn a light on and off.

You can do that with the two switches. This means you can turn the light on one switch and then shut it off using the other, and vice-versa.

You need two sets of 3-way switches. There should also be enough length of wire that can bridge the distance from the light switch to your bedside. However, unless you are an experienced electrician, I do not recommend that you DIY this kind of project.

The reason is that a 3-way switch is not wired the same way as a regular light switch. You will also need to run wires from the original switch location to the other switch.

5. Clapper Switch

This might not be as modern as most other items on this list. Still, this was the cutting-edge lighting technology back in the late 80s and 90s.

Not many homes had clapper switches back then because they were costly. However, many 90s kids remember one wealthy friend who had this in their bedroom. They would always try it out.

The clapper switch is quite simple, but its genius is in its execution. Crack open a clapper switch, and you will find a microphone, an electronic sound filter, and two switches.

The microphone is always on and ready to pick up any sound in the room. The sounds the microphone picks up will be sent to the electronic filter.

The filter would then determine if the sounds heard by the microphone are claps. Clapping sounds are usually within the frequency range of 2200 to 2800 hertz.

The filter automatically ignores any sound that is not within this frequency range. When the filter registers clapping sounds, it sends a signal to the switches to turn them on.

You can still find clapper switches being sold these days, and they have barely changed in their design.

However, they also come with RF remote controls, allowing you to control your lights outside the house. If you want to try it, here’s a clapper switch that you can use with your bedside lamp:

Click here to see it on Amazon.

6. Remote Controlled Light Switches

Speaking of remote controls, once the clapper switches went somewhat out of style, actual remote-controlled light switches replaced them. There were different kinds of remote controls for lights back then – infrared and radio frequency.

Infrared Remote Control

You can replace the light switch in your room with an infrared switch. You can still turn these light switches on and off by hand, but it also has an infrared receiver.

Meanwhile, the remote control has an infrared transmitter. The remote transmits an invisible beam that flashes thousands of times per second. Tuning the receiver is also necessary to read the same frequency.

Radio Frequency Remote Control

Rather than sending out an infrared beam, RF remotes transmit radio waves. These correspond to the button that you are pushing. A receiver on the light switch receives the signal and translates it to machine language.

This makes RF remote controls a bit more complicated than IR, but they work much better. If you want to give this option a try, here’s a remote-control adapter that you need to try:

Click here to see it on Amazon.

Again, how to control bedroom lights remotely? You can use an app to control your smart lights or a virtual home assistant, such as Alexa, Siri, and Google Assistant.

7. Home Automation

Home automation means using your home’s internet and the Wi-Fi network to control electronics. In this case, you can control the lights in your bedroom. In this case, you have several different options:

Replace the Light Switch with a Smart Switch

Replace the old analog light switch with a smart switch. This might take a bit of electrical knowledge, but it is not so difficult to do. The nice thing about this is that you can choose whatever kind of light you want.

Use a Smart Plug or Socket Adapter

This smart option is good as it does not require rewiring anything. Remove the light from its socket, install the smart socket adapter, and screw the bulb into it.

The only downside is that the light will hang lower than usual. You can also do the same thing to your lampshades. Just use smart wall adapters. Like the socket adapter, this requires no rewiring whatsoever.

Replace the Bulbs with Smart Light Bulbs

This is the simplest solution to turn off the master bedroom light without leaving your bed. Put, you replace your old lightbulb with a brand-new smart LED bulb. You do not need to pull out your tools or anything.

Pros and Cons of Smart Lighting

Pros

As mentioned earlier, there are several options that you can use to automate your bedroom lights. In addition, they are the better choice compared to the other options listed above. The Nerf gun trick, though, is a lot of fun.

Here are some of its benefits to convince you further to choose to automate your bedroom light. You can also automate even the other lights and appliances in your home:

1. Relatively Cheap

Most people think automating the entire home is expensive, but it’s not. Buy a bunch of smart lightbulb adapters and plugs.

They are not expensive, especially if you get those made in China. If you are not looking for additional features, you do not need to get fancy branded ones.

2. Easy to Set Up

Unlike the other options, you don’t need to do any wiring whatsoever. There is no need to turn off the electricity in the entire house.

Smart lightbulbs need to be installed just like any normal lightbulb. Upon replacing all the lightbulbs with smart lights, you can set them up using a mobile app provided by the manufacturer.

3. Very Convenient

After installing the smart lights, you can configure them to work with your Amazon Echo, Siri, or Google Home. This way, you can turn on and off any light in your home using voice commands. This will make you feel like you are on the bridge of the USS Enterprise.

Cons

Even with all the benefits that smart lighting provides, some disadvantages also come with them, including the following:

1. Security Issues

You need an app provided by the manufacturer to control the smart lights. The problem with this is that it is not completely safe from hackers.

This means a hacker can gain control of the app used for your lights. If that happens, they can switch them on and off, which can be quite terrifying.

It is not just the app that you need to be careful of. Even the Wi-Fi network is susceptible to attacks. If a hacker gains access to your Wi-Fi network, they can potentially control everything in your house as well.

2. Requires a Reliable Internet Connection

Do you live in the suburbs where finding a reliable internet service provider is difficult? Then it might not be a good idea to automate your lights. What if you will only be controlling your light using your local network?

You have to ensure that the Wi-Fi signal inside your home is strong. If your phone suddenly loses Wi-Fi connection, you won’t be able to control your light from your bed anymore.

3. There Is a Bit of a Learning Curve

You must keep abreast of technology to make the most of your smart lights. Just learning how to turn your lights on and off will require a bit of initial studying on your part. It is quite unlike traditional light switches, where you must toggle on and off.

Frequently Asked Questions (FAQs)

Do I Need to Automate All the Lights in the House?

No. You can control the lights in your bedroom if that is what you initially want. There is no need to do the same with the other lights at home. This will make the task a lot simpler.

You only need to set up one light instead of a dozen. Also, if you will only be automating one light, you can probably afford to get one of the higher-end brands.

How Do I Control Smart Lights?

They will link you whenever you buy a smart lightbulb, smart bulb adapter, or smart switch. It is the link you can use to download the smart lighting product companion app. This means you can control your smart light from your phone.

Also, many smart lights allow you to change brightness, color, and hues. You can even schedule when the lights will turn on and off. This is great for people who have trouble getting out of bed in the mornings.

Can You Program Clapper Switches?

Yes. You can program modern clapper switches to turn on and off after “hearing” a certain number of claps. It is also possible to program certain clapper switches to respond to a certain pattern of claps.

For instance, program them to respond to a particular pattern to prevent the lights from accidentally turning on. An example is “clap, clap, pause, clap.”

Can You Turn on Smart Lights Using Regular Switches?

If the internet goes down while the light is on, use the wall switch to turn it off again. What if the light was off when the internet crashed?

Then you won’t be able to use it again until the internet connection gets restored. If your smart lightbulb has Bluetooth connectivity, you can still use your phone to control it, even without the internet.

How Many 3-Way Switches Can You String Together?

You can have an infinite number of 4-way switches between the two main 3-way switches. You can then expect all the switches to control a single light.

In Closing – Ways to Turn the Bedroom Light On and Off Without Moving Out of Bed

The best way to turn your bedroom light on and off without leaving your bed is by using home automation. After automating your light, you can use Siri, Alexa, or Google Home.

You can also use your voice commands to turn the lights. Home automation can also control the other electric devices in your house, not just the lights.

Your options for turning the bedroom light on and off without leaving your bed include the following:

  1. A Long Stick
  2. A Length of String and a System of Pulleys or Hooks
  3. A Nerf Gun
  4. 3-way Switch
  5. Clapper Switch
  6. Remote Controlled Light Switches
  7. Home Automation

You can use the old-school clapper switch if you can’t afford home automation. There is even a remote-controlled lightbulb or just a long stick. Note the methods above if you don’t want to get up from bed to control your light.

Bedroom lamps

What and why? - Two main questions that we will answer in this article. With what to control the light scenes in the bedroom, why you might need something more than a simple switch.

Pictured:

Multifunctional lamps for the bedroom. These can be luminaires with a built-in clock, connectors for connecting an MP3 player or mobile phone, built-in speakers for listening to music and a photo frame. There are even models with fragrance - you can choose the smell, the chosen fragrance will help you cheer up or relax.

Pictured: Rotaliana MultiBook, designed by Donegani Dante, Lauda Giovanni.

Two backup switches. Allows you to control your lighting from the comfort of your bed. The easiest option is to install switches near the entrance and at the head of the bed. Pleasure is inexpensive, but how convenient: he entered the room - turned on the light, went to bed - turned it off. Of course, it is better to foresee such a scheme even at the repair stage in order to carry out all the necessary work on wall chasing, cable laying, etc. If it was not possible to do this in advance, you can run the wires around the perimeter under the baseboard, and put the switch on the back of the bed. It is clear that not every bed is suitable for these purposes (you won’t be able to put the switch on an openwork metal headboard or a model with a back upholstered in textiles). In addition, the switch should be placed in such a way that it cannot be accidentally touched by a hand or a pillow.

Pictured:

The switch at the entrance and duplicating at the head of the bed is a convenient scheme that needs to be implemented already at the repair stage, since it is associated with wall chasing.

Dimmer. It allows you to smoothly adjust the power of the luminous flux. A dimmer, for example, can be installed instead of a traditional push button switch. It is quite simple to do this, and the dimmer is not expensive, but it will add comfort to your life. So, in the morning, when you just wake up, a sharp bright light will not blind you, it can be added gradually. And if your child does not want to fall asleep in the dark, he will not be afraid with minimal lighting.

Examples of switches with dimming rotary lever.

Model 1 dimmer from Meljac factory.

There are three types of dimmers: built into the bedroom luminaires initially, connected to the luminaires and mounted instead of a switch. In the first two cases, they are used to adjust the brightness of only one light source, and in the third, all the bulbs in the room. It should be noted that such equipment can only work with incandescent lamps, fluorescent ones cannot withstand power surges.

Pictured:

The built-in dimmer allows you to adjust the intensity of the light coming from it.

Total control systems. A whole group of luminaires (light scene) can be controlled with one switch. In this case, the location of the switch relative to this light scene is completely unimportant. For example, the light in the bedroom can be turned on immediately by entering the apartment, that is, from the hallway. And what is especially valuable is that you can turn it off in the same way - and you won’t need to go to the bedroom once again and check whether you have turned off all the appliances before leaving. In addition to stationary switches, there are also remote controls. As the name implies, they can be used to control the lighting of the bedroom from anywhere in the apartment.

Pictured:

Lighting scenario control systems include a single touch screen switch module that can be used to control a whole group of light sources, as well as roller shutter and curtain drives.

articles, switches, dimmers, dimmers, wiring accessories, bedrooms, selection, electrician

Comment on FB
Comment on VK

Automate bedroom lighting - B.E.G Blog.

The frantic pace of modern life does not allow us to spend much time at home. We come home from work, devote a couple of hours to household chores and immediately move to the bedroom in order to have a good rest before starting a new day.

At the same time, such a daily routine does not at all imply that we will go into the bedroom, immediately turn off all the lights and go to bed. Someone likes to read before going to bed, someone allocates this time for self-care, and someone devotes all his waking minutes to solving work issues.

Whatever the “evening ritual” is, light is necessary for it. How to properly equip the lighting in the bedroom? And why should lighting control be automated? The answers are in our article.

Arranging lighting in the bedroom

Before proceeding with automation, let's figure out how you can arrange the lamps in the bedroom.

First we need the main light. A large chandelier traditionally becomes the center of lighting in the bedroom. It is placed either in the geometric center of the room, or above the bed. The latter option is used less frequently: it is not always convenient.

Another important element in the bedroom is the lighting in the bed area, just right for those who like to read before going to bed. Floor lamps, sconces, small table lamps are installed here.

Complements the two main types of zone lighting in the bedroom. Lamps and floor lamps are installed around the perimeter of mirrors, near a cabinet or desktop. Spotlights are placed not only outside, but also inside objects, for example, a wardrobe or bedside table.

Functional lighting in the bedroom is also complemented by decorative lighting. To emphasize the beneficial aspects of the design, spotlights, floor lamps, nightlights or even LED candles are installed in niches, on the ceiling or around the perimeter of the paintings.

How do sensors work in the bedroom?

First of all, you should understand that the sensors in the bedroom are installed to automatically turn on / off lighting fixtures. You can use this function in different work scenarios.

You need to automate the central lighting carefully, because in a dream you will toss and turn,
and the sensor, accordingly, will respond to movements. The light will automatically turn on and interfere with sleep.

If you do not limit the detection zone of the sensor, then such an automation system will only cause discomfort. To prevent the device from seeing the sleeping place, it is necessary to use mask lenses (curtains).

A smarter solution is to install the sensors under the bed. So the device will register movements only when you get up from your bed. For example, in order to drink.

The lower light will not interfere with the household and will help you calmly get to your destination. It is important to remember that when using 220V sensors, it is necessary to isolate the voltage from direct contact with a person.

It is also possible to install the sensor at the bedside table. It will also work when you wake up at night and come in handy, for example, if you decide to read before bed.

Another convenient option is to install the sensors inside the furniture. For example, the mini motion sensors of the PD9 series are suitable for cabinets, bedside tables and wardrobes. They will react to movement when you open the door or drawer, turn on the light and help you find the things you need without any problems.

A walk-in closet combined with a bedroom also cannot do without light. And there we, perhaps, most often forget to turn off the light. Motion sensors will solve this problem, as well as simplify the process of finding and choosing things.

You don't have to stop at home lighting. Integrated automation of housing engineering systems will allow you to control heating, air conditioning, curtains, blinds, ventilation, lighting and household appliances.

Inside such systems, which are often referred to as "Smart Homes", they use KNX control. Or for the organization of control, busbar systems with a safe supply voltage of 12-48 V are selected. You can find them in the B.E.G.

Which sensors are suitable for bedroom lighting automation?

When automating the lighting in the bedroom, it is important not only to provide the room with functionality, but also to preserve its interior. Design sensors of the PD9, PD11
and PICO series will cope with both tasks.

The ultra-slim PD11-M-1C-FLAT presence detector fits perfectly into the design of any room. It is small - 60.85 x 52 mm, and the height of its visible part is only 0.

Learn more