Bathtub drain stopped up


5 Tips for How to Unclog a Bathtub Drain

How-To,

When your shower or bathtub drain is clogged, it can cause major headaches. As a homeowner, it’s important to know how to fix a clogged bathtub drain so you can get back to your daily routine.

Read on for a list of five tips to help you unclog your tub to let the water flow freely once again.

1. Boiling Water

Shampoo and soap can cause a gunky buildup to clog your bathtub drain. To combat the problem, boil a pot of water on the stove, and slowly pour it down the drain.

While this tip might not work for all types of clogs (such as matted hair), the hot water can dissolve most soaps fairly quickly. Try this method first to see if it unclogs the drain and if not, it’s time to move onto another method.

2. How to Fix a Clogged Bathtub Drain with a Plunger

A plunger is one of the most popular tools to prevent bathtub clogging. How successful you are will depend on the nature of the clog as well as the design and size of your drain.

Take a plunger and add some water to the tub before you start to plunger vigorously. A small amount of petroleum jelly around the rim of the plunger can help to create a better seal.

3. Baking Soda and Vinegar

If you’re not a fan of using chemicals, this all-natural solution may help to unclog a bathtub drain. Start by pouring one cup of baking soda down the drain and let it settle for at least five to 10 minutes.

Next, pour a cup of white vinegar down the drain and allow the mixture to work its magic. You may need to finish by pouring some boiling water down the drain, but this method can work well for mild clogs as the baking soda and vinegar activate to dissolve icky buildup.

4. Manual Removal

A more aggressive way to learn how to fix a clogged bathtub drain is to simply remove it by hand. You may want to wear a pair of latex or rubber gloves before you start the process.

Remove the drain cover (look for any screws) and then look down into the drain to see if you can identify the clog. If you notice hair and other drain-clogging materials within reach, simply use your fingers to try and pull out as much as possible.

5. Try a Plumber’s Snake

A plumber’s snake is a handy clog-removing tool you can find at almost any hardware store. Push the snake down the drain slowly until you think you have reached the clog.

Start turning the handle of the snake until you bring it back up and out of the drain. Once you’re done, run some water to test the drain to confirm that the clog is completely removed.

Say Goodbye to Clogs

A clogged drain can cause all kinds of headaches, which is why it’s important to know how to fix a clogged bathtub drain the right way. Try these tips and when in doubt, always consult with a professional plumbing service for help.

If you want to learn more about our services or schedule an appointment, contact us today.

5 steps to stop slow emptying |

Homes & Gardens is supported by its audience. When you purchase through links on our site, we may earn an affiliate commission. Here’s why you can trust us.

(Image credit: BC Designs/Darren Chung)

Blocked bathtub drains are a common issue that few households escape, particularly when there are long-haired people in residence. Plumbers take time and money, so it’s only natural that you might prefer to learn how to unclog a bathtub drain yourself. 

Hair is by far the worst bathtub drain-clogging offender, alongside soap build-up and residue from bath oils and conditioner, so this isn’t as off-putting a job as unclogging a toilet. However, if your bath has drained slowly ever since it was first installed, the issue is likely to be down to the gradient of the pipework beneath or a more serious sewerage issue, which is when you’ll need to call in a professional. 

This guide will tell you how to unclog a bathtub drain in simple, expert steps; you can take similar steps to unclog a shower drain.

How to unclog a bathtub drain

Prevention is often better than cure.  ‘If you find your bathtub is constantly getting clogged, then make a few changes to stop it happening again,’ says David Cruz, plumbing expert at MyJobQuote . ‘A simple strainer will prevent hair clogging the drain. And regular drain cleaning with a ready-made cleaner or even just hot water can help keep soap residue at bay.’ It’s worth adopting the same tactics to avoid the need to unclog a sink, too.

If you are currently experiencing a blocked bathtub, the experts recommend simple bathroom cleaning tips are often the best way to deal with the problem. Here’s how to unclog a bathtub in five steps – we’ve ordered them by ease, so work through step-by-step until your bath empties in a timely manner. 

You will need:

1. Remove obvious obstructions

If you have a traditional drain stopper on a chain, accessing the drain opening on your bathtub will be a breeze. However, most modern baths support some form of integrated drain stopper – be it pop up, click-clack (a.k.a. toe-touch) or trip-lever. In this instance you will need to remove it to gain better access to the drain. The majority screw off, but some may require a screwdriver to pop the drain stopper. 

Once you have taken the drain stopper out of the equation – and you may find a clog of hair/gunk comes with it – take a good look down the drain, using a torch if required. If you can see any obvious obstructions, use your fingers, small tongs or a wire coat hanger to drag them free.  

2. Boil the blockage away

Assuming there is no standing water in your bath, the next easiest solution for unclogging a bathtub is the good old boiling water trick. ‘Pouring boiling water down the drain will help you get to the areas that may be out of reach. Boiling water is ideal for clearing grease and soap that has stuck together – the heat will activate it and help get things moving,’ explains Chris Wootton, Managing Director, of cleaning service Poppies .   

Just a liter or so of boiling water should suffice. Once it has cleared, try running the faucet to see if things have speeded up. If not, it’s worth trying one more kettle full before moving on to step three. 

3. Use a plunger

Before using a plunger you will need to plug the bath’s overflow to create the necessary vacuum. Most overflow covers screw off, then you can simply plug the hole with a damp face cloth or large slab of putty (like Blu Tack).  

‘To execute the plunger technique properly, remove the drain stopper and fill the water up by a couple of inches. Take a sink plunger, not a toilet plunger, and place this directly over the drain before pumping it up and down a few times, taking pauses to see if the water begins to drain,’ says Trinity Owhe, Design Expert, Victorian Plumbing . ‘Repeat this a few times until, with luck, the blockage is gone.’

4. Add baking soda and vinegar

Cleaning with vinegar and baking soda is a good way to clear a blockage in a bathtub drain.  

‘Baking soda and white vinegar are a great home remedy for unclogging a bathtub drain. Pour some bicarbonate soda into the drain and let it sit for 15 minutes before pouring white vinegar down the drain,’ says Trinity Owhe, Design Expert, Victorian Plumbing. 

‘The chemical reaction that occurs creates a strong foam-like substance that might dislodge any blockages and will also help neutralize unpleasant odors. Once the mixture stops fizzing be sure to rinse this away with water,’ she adds.

5. Invest in a plumber's snake 

If your blockage is still refusing to budge, it’s time to tool up and learn how to use a drain snake or one of the range of tools, readily available from hardware stores or online, designed to delve deeper into your drain. Plumber’s snakes, hair snakes and long, flexible pipe-cleaners are all brilliant for breaking through blockages further down the pipework underneath your bath. 

‘A metal plumber’s snake that is about 9ft long is best for accessing any obstructions that can’t be removed by hand. They’re easy to use and very effective,’ says Ben Chalk, Chartered Construction Manager, GIR Services .  

(Image credit: Future PLC/Linda Clayton)

What can I pour down my bathtub drain to unclog it?

Boiling water should be your first port of call. ‘Baking soda and vinegar are also great natural alternatives to chemical solutions. Pour a cup of baking soda down the drain, wait a few minutes for it to set, then pour a cup of white vinegar down the drain,’ advises Chris Wootton, Managing Director, of cleaning service Poppies.

‘The mildly acidic solution should break down more severe clogs and following up by pouring boiling water down a few hours later should help clear any lingering debris. In the event this doesn’t work, you may need to resort to chemicals or unblocker – there are lots of reasonably priced and effective drain unblockers on the market,’ adds Chris.  

Linda graduated from university with a First in Journalism, Film and Broadcasting. Her career began on a trade title for the kitchen and bathroom industry, and she has worked for Homes & Gardens, and sister-brands Livingetc, Country Homes & Interiors and Ideal Home, since 2006, covering interiors topics, though kitchens and bathrooms are her specialism.  

How to clear a blockage in a bathtub removal at home, how to clean a drain in a bathroom, how to clear a blockage in a bathroom It is complicated by the fact that the lock does not allow the use of all plumbing fixtures in the apartment, including the bathroom. Also, the bathtub may become contaminated with wastewater penetrating into it through a clogged drain pipe. Therefore, timely and quick removal of blockage in the bathroom is an important and urgent problem.

  • hairballs caught in pipes from a bath;
  • accumulation of fat deposits on the walls, reducing the diameter of the pipe.
  • Therefore, it is not recommended to dispose of food waste down the drain;
  • incorrect installation of the siphon or insufficient slope of the sewer pipe;
  • long service life of the sewer and its deterioration. Over time, roughness forms on the walls, trapping dirt and grease;
  • long period without hot water. Cold water does not completely dissolve the fat and it settles on the walls of the pipes.

  • Methods for removing blockage in the bathroom

    All existing methods are conventionally divided into several groups:

    Sanitary cable

    This device is one of the most reliable and successful solutions for removing clogging. It is chosen by thousands of home craftsmen for use in their apartment. As a rule, the cable has a length of about 10 meters and a diameter of 6 to 9mm. For ease of rotation, there is a handle at its end, the spiral is placed in a metal tube so as not to damage the hands during operation. For maximum cleaning, there is a brush made of metal wire or a tip with sharp peaks at the end.

    Steps for clearing the blockage using a sanitary cable:

    1. Remove the siphon, wash it and clean it of visible dirt;
    2. Insert the cable into the hole of the pipe and, turning, gradually push it inward;
    3. If the cable rests against an obstacle, then it is worth pulling it out a little and returning it back, with a little effort;
    4. When reaching the stand, remove the cable and wash it from dirt. The distance to the riser can be determined by eye using external communications and marked on the cable with the help of electrical tape;
    5. The operation must be repeated several times, regularly washing the cable with soap;
    6. It is important not to make sudden or quick movements, as the inner walls of the plastic pipe may be damaged, which will only increase the frequency of occurrence of blockages.

    How to dissolve hair in a bathtub drain? First, it is worth removing the main lump. It is possible to eliminate the blockage, which was formed due to the ingress of hair into the drain, in another mechanical way. Hardware stores sell small (up to 50 cm), plastic snakes with serrations on the edges. They easily pass into the opening of the siphon and pull out the stuck hair from it.

    Bathtub

    This item must be in every apartment. Bathtub is one of the quickest and easiest ways to eliminate clogging in the bathroom without dismantling the pipes. The device is a construction with a wooden or plastic handle, at the end of which there is a rubber sphere. With vigorous pressure on the lever, the sphere shrinks and pushes the air flow into the sewer pipe. In this way, under the influence of a hydraulic shock, the cop is removed and washed away further along the riser.

  • Close the drain plug and fill the tub with hot water. Then, remove the cork and give boiling water to completely fill the pipes;
  • Place a plunger over the drain hole and press down on it about 7-10 times. For better sealing, the overflow hole must be plugged with a rag in a cellophane bag;
  • Remove the plunger and check the pipe's permeability. If the water still goes bad, repeat the whole procedure again.
  • Remove blockage in siphon

    Due to its curved shape, the siphon often becomes clogged. When removing the blockage, the siphon must be removed, since the plumbing cable does not pass through its opening. Before installation, the siphon should be thoroughly cleaned from accumulated dirt. How to clean the siphon in the bathroom:

    1. Place a rag or a basin with low sides under the siphon. Water is always present here, therefore, it is worth thinking in advance about where to drain it;
    2. Loosen the plastic nuts located at the overflow outlet and the corrugation connected to the sewer pipe. No special tool required, they can be opened by hand;
    3. Unscrew the screw in the drain hole in the bathroom using a screwdriver. Remove the flask and remove the corrugation attached to it;
    4. Place all elements in hot water with powder or soap. Remove the lid of the sump and clean the dirt from it;
    5. Wash each part thoroughly;
    6. Reinstall the siphon in reverse order. Check each joint for tightness. To do this, it is enough to open the water and apply a gray rag to the place of connection.

    Chemical stain removal

    All chemical stain removers are very popular. This is due to numerous commercials and reviews about them by other buyers. According to the manufacturers themselves, their products can cope not only with congestion, but also dissolve hair, fat, lime deposits, paper and food debris. At the same time, the compounds are completely safe for both metal and plastic pipes.

    On the shelves of the store you can find a lot of tools than to clean the pipes in the bathroom.

    There are several types of chemicals that allow you to deal with the problem, how to remove the blockage in the bathroom:

    How to use each of them is described in detail on the packaging. In most cases, it is enough to pour/pour the contents of the bag or bottle into the drain hole and wait.

    According to independent surveys, the following brand names of constipation products are preferred by buyers:

    Mole. A well-known brand that has been popular on the market for more than a decade. This is a means of domestic production, distinguished by an affordable price. On average, 1 liter of Mole costs about 50-60 rubles. The composition includes: potassium and sodium hydroxide, surfactants, acetic acid. For use, it is necessary to pour Mole into the drain hole and leave to act for a period of 1.5 to 3 hours. After opening the faucet, rinse the pipes well. According to the manufacturer, one time is enough to completely eliminate the blockage;

  • Bagi Potxan. The drug is produced in Israel and has the strongest formula that allows you to eliminate any infection. The cost for a 600 gram package varies from 350 to 450 rubles. As part of Bagi: PABs, concentrated alkali, acids of non-organic origin. Thanks to this aggressive composition, the product dissolves hair, paper and food waste in a few minutes. When working with Bagi Potxan, the use of gloves is a prerequisite. After completion of work, the room must be well ventilated;
  • Tiret. The drug is produced in the form of a gel. This domestic product is actively advertised in various media and is popular with consumers. The price of one liter of Tiret is approximately 400 rubles. The composition indicated on the bottle includes: active chlorine, PAB. The volume of one liter is calculated for 4-6 applications, depending on the severity of the infection. The gel must be poured into the drain hole and left to work for 5-10 minutes. Then, rinse the pipes with hot water. As with other chemical preparations, it is necessary to work with Tiret with gloves;
  • Sanfor is another brand of Russian production. This manufacturer has not only means for removing blockages, but also other cleaning compounds. In this case, the composition contains hydrochloride and sodium hydroxide, active salts and various surfactants. 3a bottle with a volume of 750 g will have to pay from 60 to 80 rubles. Sanfor is characterized by fast action (only 10-15 minutes) and efficiency, removes hair, fat and other contaminants. At the same time, special means of protection will not be required;
  • Deboucher Aqualon is a domestic product, the cost is from 120 rubles per liter. The composition of Deboucher includes: sodium and potassium hydroxides, catalysts and chlorine. The period of influence on the zacop is from 1 to 2 hours, after the pipe is washed with hot water. Big minyc - big expense. One package is enough for just a few applications, and sometimes even one time.
  • Folk remedies to fight blockages

    From the ingredients that are in every home, you can prepare no less effective means for cleaning the sewer pipe. In this way, you can save the budget and avoid possible allergic reactions to ready-made means of industrial production. There is another indisputable plus of folk remedies - they are so accessible that they can also be used as a preventive measure.

    Popular folk remedies, based on their effectiveness, availability and frequency of responses to the request: "request in the bath, removal in the home."

    Hot water

    Boiling water is one way to get rid of a blockage in the bathroom. According to many users, it is from spilling the pipe with hot water that all manipulations for cleaning it should begin. The water for this operation does not need to be heated additionally, the one that comes from the tap is sufficient. With the help of this simple method, it is possible to remove fat frozen on the walls of the pipe, as well as soften or remove a very small zacop. If only hot water is not enough, then you should move on to more serious methods.

    When using this method, it is important to consider the technical characteristics of the PVC pipe. The maximum allowable temperature for it is 70 degrees. Staying inside the tube of boiling water at 100 degrees is not desirable for more than 4-5 minutes.

    Soda with vinegar

    This composition shows itself well in the fight against various contaminants in the kitchen or sanitary ware, and also effectively fights against blockages in pipes. Instructions on how to remove the sludge in the bathtub with a solution of soda and vinegar:

    1. Pour 250 grams of soda into the drain hole (this is about half of a standard package), pour lightly with water and wait for complete dissolution;
    2. Pour a glass of 9% vinegar into the hole, immediately close the hole tightly with a cork;
    3. Wait half an hour, turn on the hot water and rinse the sewer pipe well. A greater effect can be achieved by pouring, first, boiling water from a kettle, and only then dilute it with hot water from the tap.

    Salt and soda mixture

    From these two powders it is necessary to prepare an aqueous solution in the following proportions:

    Mix everything well and boil until the components are completely dissolved. The hot solution must be poured into the drain hole and tightly closed with a stopper. It will take about 2-3 hours to cool down. After this, the drain pipe must be rinsed with hot water for several minutes.

    Caustic soda

    This is even more caustic sodium when compared with ordinary baking soda. The action of castic soda is more pronounced, it is used most often in the form of an aqueous solution. Mixing proportions: 200 g of caustic soda per 1 liter of boiling water. Pour the liquid into the drain, according to tradition, plug it with a stopper and wait 2-3 hours. Afterwards, rinse well with hot water.

    Measures to prevent blockages

    Proper prevention will allow you to avoid the problem of blockage in the future and not puzzle over the question: clogged bathtub how to clean it at home. The methods are simple and do not require much time or effort:

    The problem of blockages in the sewer pipe has been accompanying a person for many decades. 3a this time, many options for solving it were invented: plungers, cables, various chemical preparations. According to plumbers, in most cases a plunger is enough. If it didn’t help, you can connect the cable to the work, and then do the final cleaning of the pipe with the help of a chemical or natural remedy for blockages.


    Dreaming of a Jacuzzi bath or a spacious shower?

    Contact the real estate agency "Etazhi" - we will find an apartment for you with such a solution, and also check if everything is in order with communications.

    To book an appointment with an expert, leave your number.

    How and with what to clean the bathroom drain from hair: mechanical and chemical methods

    Contents:

    Bathroom clogs are definitely not a pleasant sight: cleaning the bathroom drain from hair can be quite problematic due to accumulated water and a terrible sewer smell. There are several quick cleaning methods, but resource mschistota.ru recommends not bringing the drain to a blockage, but resorting to preventive measures.

    Easy Ways to Clean the Drain

    The drain hole of the bathtub is most often clogged with human hair: it tangles ugly and interferes with the passage of water. The bundle gradually collects other small debris: pet hair, threads, pieces of soap, etc. If such a blockage is not eliminated, an unpleasant odor will appear. Most often, the problem of hair accumulation worries the owners of a bath with a cross drain plug.

    There are other causes of frequent blockages besides neglecting to clean plumbing: this is the abundance of drained debris and problems in the sewer system itself. Try to control the amount of debris that gets into the tub. Entrust plumbing repairs and replacements to professionals.

    Hair clogs in bathtub drains can be removed mechanically and chemically. Let's start with cleaning with various objects.

    Vantuz

    Vantuz - the first assistant in case of blockages in plumbing. This object with a rounded rubber nozzle breaks through the blockage in the pipe through pressure.

    How to properly clean a bathtub with a plunger:

    1. Position the rubber nozzle so that it completely covers the drain hole.
    2. Fill the bathtub with a little water to cover the rubber pad.
    3. Push down on the plunger handle and lift it sharply to push through the blockage. Sometimes it takes a few minutes to work. For convenience, choose plungers with a long handle.

    Tip
    The plunger can be used not only when the drain is extremely clogged. Periodically draw water into the container and clean it.

    Rope

    Plumbing cable - a savior in the most difficult situations. This is a long thin metal object with a convenient handle for rotation.

    How to get rid of hair in the pipe with a rope:

    1. Insert the object into the tube and carefully push it as far as possible.
    2. Turn the knob.
    3. As soon as the resistance becomes noticeably weaker, move the cable back and forth. When the blockage breaks through, remove the cable and turn on a strong pressure of water to finally push the debris into the sewer.

    Important
    Be careful when mechanically cleaning the drain, especially if the pipes are plastic.

    Remove manually

    If there is not much hair, it is easy to reach it with your hands. It is advisable to do this after each use of the bath. A more tenacious tool is a knitting or hard wire bent hook with a fairly long handle. In any case, use protective rubber gloves to avoid touching the dirt.

    From time to time it is worth opening the siphon itself and cleaning it from the inside, especially if an unpleasant smell enters the room from the sewerage.

    How to remove the siphon and clean it:

    1. First, place a piece of cloth directly under the siphon to absorb moisture and place a bucket underneath. Protect the floor from dirt.
    2. Slowly unscrew the lock nut, then remove the flask.
    3. The water for the water seal from the opened siphon will immediately pour into the bucket, and some of the debris will fall out there.
    4. Check with a hand or a hook that a large lump of dirt is not stuck in the body of the siphon (reluctant to come out, for example, toothpicks stuck across).
    5. Clean the siphon with a cloth and detergent. Try to clean it from plaque.
    6. Reassemble the siphon in reverse order, check the tightness by turning on the water.
    7. The siphon is also recommended to be opened and cleaned for preventive purposes, without waiting for the pipe to become clogged. It is enough to do this once every 2-4 months, depending on the number of people in the family.

    Sometimes removing the flask is not enough. If a lump of dirt (from rust, feces of pets and babies, etc.) has grown in the pipes, you have to disconnect the siphon from the overflow and drain, clean the pipes with a hook or cable, wipe with a ruff or napkin. After that, having assembled the structure back, it is necessary to carry out dry cleaning. Such problems are especially typical for old corrugated pipes older than 10 years.

    A tricky way to quickly clean a pipe without taking it apart:

    1. Unscrew the drain plug.
    2. Cut a long strip of wide tape.
    3. Insert the tape into the drain hole and run it along the walls.
    4. Hair and other debris will stick to tape.
    5. Repeat the procedure a couple of times to collect as much debris as possible.
    6. Complete the procedure by flushing the pipe with water.

    How to remove a blockage

    Unlike solid objects (jewellery, toys and their parts, toothpicks or cotton swabs, etc.), hair can be dissolved in the bathroom drain. For this, both industrial and some folk remedies are suitable.

    Industrial product

    A lot of products are produced for blockages, but it is better to choose one that says "dissolves hair and wool." Also read the instructions: not all chemicals are suitable for use in a certain type of sewer pipe. For example, aggressive "Mole" is not recommended for plastic.

    Cleaners are liquid (gels) and dry (powders). The latter type is combined with a small amount of water, and usually it shows more efficiency.

    Advice
    Never overexpose the agent, fill it strictly for the time indicated in the instructions, otherwise the pipes may deform and have to be replaced. Also, do not rush to wash it off, let the chemistry work, and after washing off, do not use the bathroom for a while so that the product cleans the far sections of the pipe.

    Remember to wear protective gloves and ventilate the bathroom after using chemicals.

    Soda and vinegar

    If you don't have time to run to the hardware store for professional products, use what is always at hand. Ordinary soda and vinegar do an excellent job with various dirt and blockages.

    How to remove the blockage with the folk method:

    1. If there is water in the bathroom that does not go through the pipe, drain it.
    2. Now pour about half a pack of baking soda down the drain.
    3. Turn on the hot water tap after a couple of minutes. The soda will sizzle and go deeper into the pipe.

      Learn more