Home » Misc » Wood front porch railings

Wood front porch railings


Wood Porch Railing, Traditional Exterior Cedar Rail, Deck Balustrade

Showing all 10 results

Default sortingSort by popularitySort by average ratingSort by latestSort by price: low to highSort by price: high to low

Our wood porch railing is made of the absolute best clear cedar wood available.   This railing has no knots, and is known for straightness and rot resistance.

We have designed our exterior wood rail to be architecturally correct, easy to install, and beautiful to look at.  Oh, and it’s strong too: We took the additional step of having our porch railing designs tested against the strength requirements for manufactured guard rail.  Along with our newel posts, newel post installation hardware, and rail installation hardware kits, our rail was found to exceed the standards required by building codes.

From the TESTIMONIAL page: F.M. of Rescue, CA writes “American Porch is outstanding! They helped me with a few key decisions in the specification of the porch components, and everything was delivered well packed for shipping and just as I ordered. The porch rail components are very high quality and went together perfectly – just as I had hoped. I reviewed other providers of porch products but found American Porch to be competitive in price and superior in the client interface and product offerings. I have received many compliments on how well the project turned out, and I will plan to do my next porch railing design project with the American Porch family!”

E.B. of Brockton, MA writes “We just installed the rails on the top today.  They look great. People think they are PVC. I pre paint them before installation w Benjamin Moore high gloss oil enamel.  I was on another when I ordered, then pre prime then pre paint. I also had to re frame the roof,  install rubber, then build a mahogany deck on it.  I will send partial pics once developed.  The full job wont be done for another month. I won’t forget you and they are great quality.
Thanks.”

M.D. of St. Paul, MN writes “I can’t begin to describe the railings that I received from American Porch. The word “gorgeous” is just not enough! We put the railings on our outside porch and we have received so many compliments. Not only was the service quick but the wood porch rail had no flaws. I highly recommend American Porch to anyone who looks for quality because it truly is high quality. ”

11 Modern Porch Railing Ideas

Who knew porch railings could be so chic? These modern porch railing ideas will add serious curb appeal and give your porch a whole new look.

Every editorial product is independently selected, though we may be compensated or receive an affiliate commission if you buy something through our links. Ratings and prices are accurate and items are in stock as of time of publication.

1 / 11

Courtesy @hasegawahouse/Instagram

Wood and Metal Porch Railing Idea

This charming porch from @hasegawahouse features a wood and metal porch railing idea that combines traditional and modern style for a fresh look.

The DeckoRail Redwood Deck Rail Kit lets you install this railing yourself. The pressure-treated redwood resists insects, rot and decay. And the durable yet sleek black aluminum balusters look chic.

2 / 11

Courtesy @arttmfg/Instagram

Crisscross Porch Railing Idea

This X-style, crisscross railing by @arttmfg fits the distinctive modern farmhouse style we love. You may be more familiar with this look for a wood fence, but the thin metal brings a more contemporary spin to this design.

3 / 11

Courtesy @gonenomadhome/Instagram

Horizontal Porch Railing Idea

This metal horizontal railing offers a sleek modern style without obstructing the view from your porch. Here’s what @gonenomadhome had to say about it: “We are loving this new horizontal railing. The rails are so thin compared to our old ones, so they barely block our view.”

4 / 11

Courtesy @srtrailings/Instagram

Glass Porch Railing Idea

Gleaming glass railings, like this example from @srtrailings, are becoming more popular because of their streamlined look. The durable tempered glass only requires an occasional cleaning with two to three squirts of dish soap to a gallon of water.

Wipe down the railings and glass with the soap solution and rinse thoroughly with warm water. Finish with a squeegee or lint free cloth.

Shop Our Favorite Products

5 / 11

Courtesy @gta_railings/Instagram

Aluminum Porch Railing Idea

This classic vertical railing by @gta_railings brings a modern element to the home, contrasting nicely with the red brick. According to GTA Railings, powder-coated aluminum will not rust, rot or warp and is virtually maintenance free. Wipe it down with a damp cloth seasonally and your railing will look like new for years to come.

6 / 11

via merchant

Chippendale Porch Railing Idea

The classic Chippendale geometric pattern has been around since the 1700s, made famous by cabinetmaker Thomas Chippendale.

Today, Chippendale railing, like this one from The Porch Company, features that distinctive geometric pattern, similar to what Chippendale incorporated into chair backs. We see it as timelessly fresh and predict you’ll get a lot of compliments on this distinctive railing.

7 / 11

Courtesy @susancohan/Instagram

Zigzag Porch Railing Idea

This stunning zigzag porch railing (photo by @susancohan) would make any home stand out in the neighborhood. The sharp angles make a statement against the traditional style of the home. When taking a risk like this, paint the railing to match the house so it remains cohesive with its surroundings.

8 / 11

Courtesy @fossilforgedesign/Instagram

Chevron Detail Porch Railing Idea

This steel porch railing by @fossilforgedesign offers up classic style with a twist!

The traditional vertical balusters received a modern upgrade, with one addition. The chevron details along each length of railing interrupts the straight lines and updates the overall look of the porch. Now the railing is one part traditional and one part modern for the perfect balance.

9 / 11

Courtesy @libertyfence/Instagram

Sunburst Porch Railing Idea

A sunburst design, like this porch railing by @libertyfence, presents an uplifting, positive vibe. The straight lines of the sunrays are on trend. This railing is made from rigid PVC (polyvinyl chloride). According to Liberty Fence & Railing, it’s modified to provide superior impact strength and UV resistance for long-term durability.

10 / 11

Courtesy @devline_rail/Instagram

Cable Porch Railing Idea

Cable porch railing has a clean, modern look, plus it provides an unobstructed view from your porch. This cable railing by @devline_rail features stainless steel cables.

The main benefit of stainless steel over other types of cable is its corrosion resistance. You won’t have to worry about deterioration or rust, even in humid environments.

See how to build a cable railing, starting at Photo 11.

11 / 11

Courtesy @metalwoodpdx/Instagram

Laser Porch Railing

Porch railing or art installation? Why not both?

The graphic design of this modern porch railing by @metalwoodpdx turns this ordinary (tiny) porch into a showstopper. Besides its distinct style, this railing is made from recycled metal! Metalwood Salvage takes raw metal from local scrappers or donors and gives it a new life.

Originally Published: July 01, 2022

Erica Young

Erica Young is a freelance writer and content creator, specializing in home and lifestyle pieces. She loves writing about home decor, organization, relationships, and pop culture. She holds a bachelor's degree in Journalism and Mass Communication from Arizona State University, the Walter Cronkite School of Journalism and Mass Communication.

90,000 wooden railing for the porch

Content

It is the porch that draws the attention of guests in the first place, so its design should be approached with special attention. One of the important stages in the construction of the porch is the creation of the railing. If they are built incorrectly, it can ruin the look of the house. nine0003

Why railings are needed

The main purpose of the described structures is to ensure the safety of movement on the stairs. They are also a support that allows you to safely move around the porch when it is, for example, slippery.

But the railing also has a decorative function. Without them, the porch looks unsafe and less comfortable. Thanks to this design, you can modify the style of the house and make it more beautiful. When creating railings, wood and metal are often used, but sometimes stone is also used. nine0003

Porch railing specifications

The main parameter to pay attention to is the height. The choice of a specific figure depends on the preferences of the residents of a particular house. If all family members are tall, you can not follow the standard sizes and make the fence with your own hands a little higher.

The average height is 90 cm. It is these wooden railings that are usually comfortable for most adults. If the family has small children, it is worth taking care of creating additional supports, the height of which should be about 50 cm. After the child grows up, these elements can be easily removed. The strength of the railing is also of great importance. This design must withstand the weight of an adult. Otherwise, the railing will be dangerous. nine0003

Important! If there are children in the family, it is worth making railings without horizontal elements, along which it is convenient to climb up.

Wood railing features

Wood is the traditional material from which such structures are made. It is durable and aesthetically pleasing and is suitable for houses made of various materials. If wood was used for the exterior of the house, then wooden porch railings are the best option.

If you want to make the railing more durable with your own hands, a metal frame is created, which is then decorated with wood. The tree has the following characteristics:

Aesthetics. This material lends itself well to processing, so various designs can be made from it. If you use the woodcarving technique, you can create beautiful and original railings.

Easy to install. If you wish, you can install a wooden railing yourself without professional tools and experience. For this work, the simplest tools are used.

Environmentally friendly. Wood does not affect the body in any way and is therefore a safe material. nine0003

Security. If there are small children in the house, it is worth choosing a railing made of wood, since in case of an accidental impact on them, the body will not receive serious damage. At the same time, touching the railing will not cause discomfort, since even under the influence of temperatures it does not become too cold or hot.

But the tree also has disadvantages, which include the fragility of the material. To protect the railing from moisture and other adverse factors, it is worth treating them with special compounds. It is also important to remember that for comfortable use of the railings, they should be treated so that when the skin of the hands touches the railings, they are not injured. In the photo you can see the railing, made in various styles, which will allow you to choose the most acceptable option. nine0003

Handrail installation

DIY handrail installation can be done by yourself even without experience in construction. To create a railing, you can use the materials that remained after the construction of the house. This will save you money and time looking for other materials. In this case, the railing will be created in the same style as the house.

The simplest design is the guardrail, which consists of several support posts and a horizontal rail. But such a product is not suitable for all houses, so before building it is worth choosing a certain style. When creating a railing, you should follow a certain sequence of actions:

  1. Porch preparation. The surface on which the railing will be installed must be prepared and leveled. If this is not done, the design being created will be less reliable.
  2. Installation of supporting posts. These elements should be slightly higher than the balusters and have a greater thickness. They should be well fixed and fastened together. The easiest way to secure is to use nails. But it is better to make the bases of the supports with your own hands with spikes and apply glue to them, and fix the structure with self-tapping screws. To make balusters, it is enough to process the bars with a section of 50x50 mm. nine0074
  3. Do-it-yourself installation of balusters. These elements are also fixed with screws and glue. When installing them, pull the cord so that they are at the same level.
  4. Painting. After installing the railing, it remains only to paint the material and apply protective compounds.

In order not to make a mistake during the creation of the structure, you should first look at the photos that show the construction process.

Should I paint my porch railing

Since wood is a vulnerable material, protective compounds must be applied to protect it. With proper care, the tree can serve for quite a long time and not collapse under the influence of moisture. Paint is also used as a decorative coating, thanks to which you can almost completely change the look of the porch.

In addition, the paint promotes the manifestation of the natural structure of the material. Such compositions also prevent the occurrence of mold. nine0003

Tools and materials for painting railings

In order to paint railings, you need the following tools:

Also for painting you will need wood filler, which is necessary to seal small cracks in the material. A primer used to increase adhesion and create a protective layer. The main consumable material is paint, the choice of which should be approached very carefully. To determine which composition is best suited for staining, it is worth considering several types of paints. nine0003

Types of paints for wood

For painting wood exposed to weather conditions, special compositions are used, divided into several types:

Oil paints contain linseed or hemp oil, which is well absorbed into the wood. Previously, it was precisely such compositions that were used to paint wooden surfaces, since they protect the material well. But gradually the popularity of such compounds has decreased, as they dry for a long time and emit a pungent odor. nine0003

Water-based paint, when applied, practically does not emit odor and well protects wood from exposure to sunlight. But the disadvantage of such compositions is the low resistance to physical impact. That is why it is worth using such railing paint only if the structure is installed as a decorative element of the porch.

Alkyds dry faster than other types and are therefore quite popular. At the same time, such paint is resistant to mechanical stress and protects against moisture. nine0003

Reactive compounds are made from pigment resin and hardener. Before painting a tree, these elements must be mixed. As a result of the reaction between them, a protective film of increased hardness is formed on the surface. The only drawback of such paints is their high price.

How to choose a porch paint

In order for the paint to withstand the impact of the external environment, it is worth making a choice based on the following parameters:

In order to keep the paint for a long time, it is worth using varnishes and other protective compounds for wood. If you do all the steps described, the railing on the porch will be not only reliable, but also beautiful. After reviewing the presented photos, you can choose the most optimal option for painting the porch.

How to process the wooden steps of the stairs on the street - features

hidden niches, shelves, spacers and supports. Everything that is hidden from the rays of the sun must be painted first, until moisture from the soil penetrates into the wooden surface of the lower porch tier. The second run is to process the railings and balusters, and only after that it is possible to paint the boards of the upper platform of the porch, steps, stringers. nine0003

For a private house or summer cottage, there is no more affordable and easy-to-handle material than construction wood. Almost any side work is not complete without the use of lumber, but sometimes it is easier to build a gazebo, benches with a table or a wooden porch than to keep it from rain and sun. The entrance to the house is on a special account, so finding the material and processing method, the better to paint the wooden porch, always remains a small problem.

The technology of preparation for impregnation spraying is standard and includes a number of simple but important requirements. The first step is to treat the surface with abrasive materials to eliminate the appearance of cracks and gaps. After that, the surface should be cleaned of dirt and dust with detergent and warm water. Finally, after complete drying of the surface, it is necessary to apply impregnation, in accordance with the instructions for use.

When deciding to treat a wooden porch, you should first choose the necessary antiseptic primer or antiseptic impregnation. Both of these tools have an identical effect, but the primer additionally prepares the surface for further processing with varnish or other material. nine0003

Porch protection against moisture

For example, consider two products that resist the penetration of moisture into the wood better than others.

Aidol Langzeit-Lasur, a medium viscosity impregnator, shown in the following photo, is perfect for treating walls, furniture, decorative structures, railings and wooden fences. The tool is absolutely safe for people. Suitable for use with any wood, because it has a huge selection of shades from ebony to dark oak. nine0003

Colorless Belinka Interier Sauna based on acrylic resin, water and a number of additives. The tool is perfect for processing a wooden porch in hot regions with high humidity. Very well withstands temperature loads and the influence of aggressive environments. The product is applied with a spray gun or roller in several layers. We will consider the process of applying this azure in more detail in the next photo.

Fungus and rot protection

The constant change of temperatures, seasons and many other natural factors lead to early decay of wood structures. In our changeable and difficult climate, a wooden porch experiences all the hardships of the environment, and this can lead to wear and tear on the structure.

The best solution for treating a wooden porch is to use a special antiseptic. Basically, antiseptics are produced in the form of solutions and in most cases are universal. The scope of their application varies from antifungal to insecticidal. The most popular are solutions from Pinotex Impra and Senezh EcoBio. nine0003

The former is used for concealed timber structures and parts such as cross beams and roof straps. It is extremely reliable and gives a persistent antifungal effect for many years. After applying the first layer, re-painting is not required.

The second one is needed to impregnate the outer part of the wooden porch, it partially acts as a primer for subsequent painting. It is applied in several layers, as indicated in the next photo, and protects against decay and mold for up to 30 years. nine0003

Impregnations for fire protection

Fire is the worst and worst pest for wood. To protect and prevent fire and even smoldering, special solutions are used - flame retardants. When a fire occurs, fire retardants in wood turn into a dense protective film that can withstand fire for a relatively long time. Fire retardants are available in the form of mortars, paints, plasters and gels.

The main representative of NEOMID 530. This solution allows you to cover the wooden base both for interior and exterior use. After processing, the wood structure reliably resists fire and is not broken, which makes it possible to further process the porch with varnishes and paints. nine0003

Another representative is Pyrilax-biopyren - a complex agent shown in the following photo, which provides protection not only from fire and its harmful effects on the wooden surface of the porch, but also treatment from fungus and harmful insects. The product is absolutely safe for people and animals. It is a universal remedy, so it can cover the tree both indoors and outdoors.

Wood insect protection

Aqualac Bor is a deep penetration impregnation that resists insects getting into the wood and its destruction. The solution does not violate the integrity of the wood and its color texture. Basically, the varnish is diluted with water, and it is intended mainly to cover doorways, railings, stairs and walls.

The second representative, suitable for processing a wooden porch, shown in the following photo, is a multifunctional decorating agent with an antiseptic effect - Tonotex. The solution is able to get rid of insects of all kinds and at the same time prevent fungi and mold from developing. It has a large selection of shades, which gives a huge field for choosing the color of wooden products from bog oak to red woods. nine0003

Apply with a brush. Allow each of the three layers to dry.

How to choose outdoor stair covering?

When choosing, it is easiest to pay attention to the manufacturer of paint or varnish. Experts recommend the compositions of these companies:

They were created for the harsh northern conditions, so they are well suited for our latitudes.

We paint

Before painting, make sure that all important steps have been completed:

Don't forget to wear a respirator!

You will need a roller and a brush to paint. First, paint over hard-to-reach areas, corners and small details with a brush. Then roll over. nine0003

Start painting at the bottom of the porch. Then the fences are covered. Lastly, proceed to the steps and platform.

Varnish is applied with a brush. Allow each of the three layers to dry.

If properly covered, your porch will last a long time. Follow the correct painting sequence and choose quality materials.

Outdoor wood coating

You can order the production and painting of wooden stairs from our company. The Russian staircase performs turnkey work from three days. nine0003

Whether the structure is exposed to direct sunlight. Stairs exposed to ultraviolet radiation require special formulations that can protect them from harmful effects.

Now you need to correctly plan the upcoming work. It can be divided into the following stages:

At the initial stage, the wood is sanded, all visible flaws are removed. The polishing process takes several days. Then there is a general cleaning. Then the product is primed, sometimes in several layers. It is good if you have an electric or pneumatic tool, otherwise you will have to use a brush to paint. nine0003

Which color should I choose? If you have a pine staircase, the choice is wide, ranging from milky white to brown.

Added: 12/20/2016 9:32:44 PM

Recently, wooden houses have become fashionable. Indeed, they have just a lot of advantages, but at the same time they are more whimsical in operation. For example, a wooden house needs special treatment of the outer layer for a normal state in the future.

Stairs

Wooden outdoor staircase

Wooden staircase near a private house

Otherwise, you can just spoil the material.

  • Wood requires pre-treatment if it is to be used outdoors. In addition, it is desirable to carry out installation in favorable weather conditions. nine0006
  • It is better to cover outdoor wooden stairs with some kind of material, since there is a high probability of damage to them.
  • Installation must be carried out in such a way that water and snow do not accumulate on the ladder during operation.
  • The first two weeks after installation, the surface can be wiped with a dry cloth.
  • The protective coating can be renewed periodically.

    • Do's and Don'ts

    Next, let's look at what not to do when caring for a wooden staircase:

    Stain removal

    Periodic care

    If care products do not help, but the appearance of the street stairs is getting worse, there are more radical ways to do it. You can, for example, paint a wooden staircase outside. This task can be done by hand. nine0003

    The old coating must be treated first. To do this, you can use a building hair dryer and a spatula. After sanding, you can cover the wooden stairs on the street with varnish or paint.

    The first layer should preferably be cleaned with sandpaper or a grinder attachment. It is necessary to process a wooden staircase in the street with high quality in order to get a good basis for further actions. Light roughness will only contribute to the high-quality adhesion of materials.

    The product can be coated with clear or tinted lacquer. There are several types of compositions, but today water-based varnish is in great demand. If the surface is treated with such a composition, all the necessary characteristics will be provided. nine0003

    You can also paint the wooden steps of the stairs outside. However, it will hide the structure of the material, and therefore distort the impression. But the paint provides the material with a higher level of protection, for example, steps and other elements.

    Results

    Whatever the steps, they should not be allowed to wear out, especially if they are wooden elements and they are operated on the street. Stairs need to be looked after, periodically renew the protective coating: process the wood, and then paint or varnish it. Then the design will serve as long as possible. nine0003

    For more information on this, please watch the video.

    But the main function of such compositions is decorative. Therefore, if you are thinking about how to beautifully paint a wooden porch, pay attention to the composition of the material, and to its color and texture, which should be combined with the facade of the house and the adjacent area.

    Conclusion

    Knowing how and with what to paint a wooden porch on the street, you can not worry that it will begin to crumble and rot in a year or two. With timely and high-quality painting, it will serve for a long time, requiring minimal investment and delighting with its appearance. nine0003

    Alexander Bykov. Author.
    Copywriter: construction, repair.
    Education: Ternopil Academy of National Economy, specialty "Management of organizations". Experience in copywriting: From 2014 to the present.

    You should know that the timber used to build the house must be brought from the winter forest. .

    Now you need to correctly plan the upcoming work. It can be divided into the following stages:

    At the initial stage, the wood is sanded, all visible flaws are removed. The polishing process takes several days. Then there is a general cleaning. Then the product is primed, sometimes in several layers. It is good if you have an electric or pneumatic tool, otherwise you will have to use a brush to paint.

    Which color should I choose? If you have a pine staircase, the choice is wide, ranging from milky white to brown. nine0003

    Added: 12/20/2016 21:32:44

    for experimenting, I threw pieces of waste of maple steps under the arbitrariness of the weather
    did not break out but twisted, this is without varnish and restore
    , and paint at least 5 layers

    1 layer open with diluted varnish

    well, this is how to say

    for experimenting, pieces of waste of maple steps were thrown to the mercy of the weather
    did not break out but twisted, this is without varnish

    and with varnish it doesn’t matter if the glue is waterproof or not
    here the elasticity of the glue with temperature changes is important

    in the epicenter there is caparol or feudal on solvent or wisprite
    these varnishes are very soft with thermal changes in the size of the tree
    and do not give cracks

    if sadolin on solvent 647-650 so it is very smelly
    stronger but not elastic
    prone to cracks into which moisture gets in

    Steps are subjected to wear loads. If the protective layer on their surface is weak, then the heels will leave marks. This is because pine is distinguished by a low density of wood. nine0003

    What is the best finish for pine

    A beginner in carpentry may wonder what to choose for a finish: stair varnish or enamel. It may be easier to treat the entire structure with a stain or stop at impregnation.

    One pine wood stain will not be enough. As a coating, it does not provide a barrier to moisture penetration. The tree becomes loose over time. For pine, stain is a material for toning. It penetrates into the wood emphasizing the texture. Even if the varnish coating is worn out, the stain will help preserve the color of the entire wooden structure for a long time. nine0003

    Pine can be protected from moisture penetration and other adverse effects by impregnation. But stair oil and wax coating are not able to protect the steps from mechanical damage. On steps treated only with oil or wax, they walk only barefoot or in slippers. Impregnation is used as an antiseptic and fire retardant.

    If the wooden staircase is made of low-grade wood, then the top layer is enamel. It masks puttied knots, cracks. The coating tolerates mechanical damage. Highly diluted enamel can also emphasize the pattern on the surface. In this case, this layer is treated as rendering. At the finish, varnish is applied in 2 layers. At the same time, all preliminary work on preparing the tree is carried out in a strict sequence: cleaning, puttying, priming. nine0003

    You can transform a staircase made of pine without defects by choosing varnish for processing. It will give the appearance of nobility, a beautiful textural pattern will be emphasized. Too light pine is tinted with varnish.

    The applied oil should be left for 15-30 minutes, after which the excess should be removed. The longer the oil is on the surface, the more intense the color will be. That is, for a brighter tint, the excess should be removed after 25-30 minutes, for a less intense one - after 15-20. If possible, every detail is processed from all sides. Then the treated surface must dry. This will take 6-12 hours. nine0003

    Fourth step: application of

    Most often you will need to use several hard brushes: large - for steps, medium - for large details, small - for smearing hard-to-reach places. You should also have a lint-free cloth or rag to remove excess oil.

    The product is applied in a very thin layer, rubbed into the wood. It is pointless to apply oil as paint: the tree will absorb only the required amount, and the rest will have to be removed with rags. nine0003

    The applied oil should be left for 15-30 minutes, after which the excess should be removed. The longer the oil is on the surface, the more intense the color will be. That is, for a brighter tint, the excess should be removed after 25-30 minutes, for a less intense one - after 15-20. If possible, every detail is processed from all sides. Then the treated surface must dry. This will take 6-12 hours.

    Learn more