Home » Misc » What is the cost of a new kitchen

What is the cost of a new kitchen


The Cost of a Kitchen Remodel

How much does it cost to remodel a kitchen?

The average cost of a kitchen in the U.S. is $25,000, but you will find the typical spending range is anywhere from $13,700- $50,000. These totals cover a wide variety of remodels, from basic refreshes that are merely facelifts to high-end updates that include a completely new layout with custom cabinets and materials. Labor will affect cost as well as what type of materials you select from.

How much does it cost to remodel a small kitchen?

On average, a kitchen remodel in the United States costs about $25k. However, you can spend up to $50k quite easily. The cost of remodeling a small kitchen will fall on the lower end of the cost spectrum most likely, but will depend on the cabinet style, materials used, etc.

What's the average cost to remodel a kitchen?

In the United States, it usually costs about $25,000 to remodel a kitchen. However, the cost of your project will vary depending on the size of the kitchen, materials used, and cabinet style selected.

How much does it cost to remodel a 10x10 kitchen?

A 10ˈx10ˈ kitchen is like any other kitchen. The average cost of a kitchen in the U.S. is $25,000, but you will find the typical spending range is anywhere from $13,700- $50,000. These totals cover a wide variety of remodels, from basic refreshes that are merely facelifts to high-end updates that include a completely new layout with custom cabinets and materials. Labor will affect cost as well as what type of materials you select from.

How do you calculate kitchen remodeling costs?

Calculating costs for a kitchen remodel is different for every project. The largest aspect of costs are materials. What type of materials will you select? High-end name brand? Refurbished or used? Labor can also affect the budget. Is your project DIY or will you need to hire a contractor for everything? It takes time, planning and professional consultation. Talk with a kitchen professional At CliqStudios it's free!

How to estimate cost of kitchen remodel?

Estimating costs for a kitchen remodel is personal different for every project. The largest aspect of costs are materials. What type of materials will you select? High-end name brand? Refurbished or used? Labor can also affect the budget. Is your project DIY or will you need to hire a contractor for everything? It takes time, planning and professional consultation. Talk with a kitchen professional At CliqStudios it's free!

How much does labor cost to remodel a kitchen?

Contracting labor for a kitchen remodel can be 0-50% of your total budget. Each project is unique. Are you the DIY type to take on 100% of labor and installation? Or can you just perform the demolition? Or do you need to contract labor out for everything?

How to cut costs on kitchen remodel?

Looking to cut costs? Start with what type of materials you want and start looking for sales. Materials is by far the largest part of the remodel costs. Looking for high-end, name brand appliances with all the gadgets? The refrigerator alone can range from $1,000 to $15,000. Looking for off-the shelf products instead of special orders can save a lot of money as well as looking for clearance items at brick and mortar stores.

How to keep kitchen remodel costs down?

Looking to keep costs down? Start with what type of materials you want and start looking for sales. Materials is by far the largest part of the remodel costs. Looking for high-end, name brand appliances with all the gadgets? The refrigerator alone can range from $1,000 to $15,000. Looking for off-the shelf products instead of special orders can save a lot of money as well as looking for clearance items at brick and mortar stores.

How Much Does it Cost in 2022? [9 Tips to Save]

The average cost of kitchen remodeling for American households is currently at $22,134, according to Homeowners and could go all the way up to $50,000. Small projects or remodeling jobs with small kitchens may cost as low as $10,000 that could include painting, replacing the sink, installing a tile backsplash and changing the facade of the cabinet.

Starting in February and March 2022, homeowners will be busy closing deals to renovate their homes. If you’re one of them and wondering how much you’re likely going to spend for the job in 2022, this is your complete guide.

Table of Contents

How Much Does It Cost To Remodel a Kitchen?

The average cost of kitchen remodeling for your average-sized kitchen will be over $20,000. The final cost will depend on the size of your kitchen as well as how luxurious cabinets or appliances you want to install. A major kitchen renovation may cost you anywhere between $40,000 to $70,000.

But before you go looking at costs and prices, ask yourself which type of kitchen remodel are you looking at:

1) Are you changing your kitchen because you HAVE to?

2) Or do you really want to invest to make your kitchen a beautiful space with good American-made cabinets that provide a lifetime warranty?

Admit it. Every time you watch Gordon Ramsay, Paula Deen, Rachael Ray and Tom Colicchio whip up delicious food on YouTube, you pay as much attention to the color of the kitchen cabinet and its simple-yet-aesthetic appeal as to the amount of salt that is added. But the task of remodeling your kitchen remains a mere footnote in the long list of things you need to do. Worry not. Here’s your step-by-step guide to what you need to spend on, how much to spend on it, and how you can cut costs without lowering the quality of your remodeled kitchen.

1.

Make a budget. And Stick to It

Americans spend an average of $21,000 on kitchen remodeling as per Improvenet, but of course, you can always spend a lot less by carefully aligning your needs with your budget. Make a list of items that are absolutely must-haves, and ensure that their costs are covered first and foremost.

— Are you planning to change your countertops or your kitchen flooring?

— Is it absolutely essential to replace your refrigerator or is it more important to fix the electrical issues in the kitchen?

— Do you need a new sink, or do you have to replace the entire drainage system?

— Do you need new cookware?

Remember, retaining the old style of the kitchen layout will go a long way in keeping your costs low. Of course, the more you add to the list of must-haves, the higher the budget will be; so keep that in mind. And if your list gets longer by the minute, then sit back and review. After all, you wouldn’t appreciate the new-look kitchen if it makes a severe dent in your finances. For example, a small kitchen can be renovated for as less as $10,000.

2. Can you DIY? If Not, Can You Help?

Labor costs, according to the National Kitchen and Bath Association, can range between 20%-35% of the total budget. But of course, this will come down if you decide to take matters into your hands, or at least help with the daily work. YouTube, for example, is full of videos that show you how to replace your kitchen cabinets, how to redo the countertops, how to select the right refrigerator for your house and how to pick the right colors for a new paint job.

Not only will going DIY cut costs, there is always a touch of personalization that can be added. And the next time someone appreciates the color of your cabinets, you can always say “I did that!” But if you are someone who believes in the ‘leave it to the professionals’, there are more than enough people who can help. Find them as per your location here. Needless to say, hire only those contractors who are licensed, insured and ready to provide you with references. According to a recent survey, 88 percent of those who decided to renovate their kitchens hire at least one contractor.

3. Are Kitchen Remodeling Costs Worth it?

Your long-term plans play a significant role in deciding whether or not you need a kitchen remodeling. Even if you are not planning to live in your house for a long time, remodeling the kitchen could tremendously add market value to the home if you plan to sell it.

Then make sure that your investments in kitchen remodeling are focused completely on building an updated infrastructure. Ensure that the electricals are up to date, the flooring is compact and the cabinets are not falling off their hinges. Electrical equipment, on the other hand, like say, refrigerators, ovens, stoves can always be refurbished instead of replaced.

On the other hand, if you plan to stay in the house on a long-term basis, you can even opt for a ‘One issue at a time’ approach and replace all the things necessary over a longer period of time. This will ensure that your budget is spent more evenly and you do not have to worry about escalating costs. One downside of this approach is that you may lose the consistency of the kitchen design if you do it over a longer period of time.

And remember, the kitchen is a part of the house, so the renovation should be in tune with the rest of the house. This is especially important if you plan to sell the house. An average-looking kitchen in an upmarket house will bring down its price. Do not over-do, but definitely, do not under-do the renovation. Kitchen remodeling is the most efficient way to increase the value of a home. Roughly $15,000-worth kitchen remodel has a return of 92. 9 percent resale value.

4. Living in the House During Kitchen Remodeling

No one likes to be sipping coffee while a professional cuts through wood with his electric ax, and there is nothing more irritating than waking up in the morning to the sound of tiles being trimmed as per the need. If you plan to live somewhere else, factor the costs accordingly in your budget.

If this seems expensive, maybe you can get the people to work at times when you are not at home. If you must move, how about calling old friends you haven’t met in a long time and visiting them? Make it sound like you missed them, and bunk on their couch if needed. This might sound a little cheap, and it sure is. It is cheaper than staying in a motel, for example. And if you save some money, invite them over for a good meal in your ‘new’ kitchen.

5. Personal Financing Your Kitchen Renovation

Budgeting is only half the job done; you need to ensure that you finance it well. And unless you have a kind granny who is ready to lend you her entire savings, it is much better to focus on HOW you want to pay before HOW MUCH you want to pay. Due to their tax-deductible components, home equity loans are the most favored options, along with refinancing, taking out a personal loan or taking a loan against a retirement plan. The Smart Alec around you will suggest paying for all of it with cash in hand instead of borrowing money. But think about it: would you rather borrow money at a low rate of interest or withdraw money from an account that is currently earning a high rate of return?

Maybe you would like to take a home improvement loan? Well, here are your options. Choose wisely, because how you pay for the renovation is as important as how much you pay for it. Also, in case you wish to get a loan, make sure you do this before the renovation works begin. It is unlikely that the contractors will not take money up front for the materials they buy, so it is best to avoid any last-minute issues.

Ask your remodeler or contractor if there is a bank they are working with. Usually, kitchen remodeling contractors have a deal with a certain bank on refinancing your kitchen remodeling costs.

6. Be Smart with Whatever You Discard

Renovation means you will be left with a lot of things that need to be discarded. Or do they? You can simply take pictures of your old but usable equipment like refrigerators, ovens, gas stoves, chimneys and upload them on Craigslist or even Facebook Marketplace. It wouldn’t hurt if the cost of new cabinet set is partly paid by an old oven, right?

Instead of throwing out your old equipment, you can’t imagine how many people will line up to buy them. Facebook Marketplace is a great platform for this kind of local sale. No shipping fee, no other requirements. Personal pickup and cash upfront.

7. Count for Overheads/Contingency

Whatever your budget, it would not be a bad idea to factor in an additional 10%-20% for contingency purposes. Labor delays, factors like bad weather, or simply unavoidable circumstances like medical emergencies (accidents, burns) will push your costs up and you rather be safe than sorry.

Also, this can be seen as an added incentive: if you do manage to keep all expenses within your Budget (congratulations) then you can use the contingency fund to, say, fund one of the wish-list items for your kitchen. Maybe you can have a Japanese knife set you have craved for so long, eh!

8. No ‘Afterthoughts’ Once You Decide

Yes, a custom-built cabinet looks nice. But do you really need it when a standard fit cabinet will do exactly the same for half the price? Do not be tempted by the countless online discounts and clearance sales around you. Once you have decided on what you want (sigh, the limitations!!) at no point should you deter from the list.

Make sure that you have enough time to look for all that you need, and spend a part of your day looking for exactly what you want. Last-minute trips to shops and hardware stores are not really fun, and even less so when you end up spending more than you had bargained for on things that you could have saved upon had you planned earlier.

How much does a kitchen cost: 4 opinions • Interior+Design

+Segmento, Poggenpohl.

Stanislav Azarov , architect.

• The budget depends on the choice of factory, finish, and household appliances.
With the factory, everything is simple - you have to pay for a well-known brand. If the headset is of a non-standard size or has curvilinear and radius elements, the cost increases significantly.

• An important role in the budget is played by the material of the countertop. Artificial agglomerate and quartz differ dramatically in price. The price of a kitchen containing many drawers and lifting mechanisms will differ significantly from the cost of a model with a predominance of hinged facades.

• And don't forget about installation, which will cost around 10% of the cost of the kitchen. But the style (modern or classic) has little effect on the cost. So, it would seem that simple wardrobes of some German brand can cost comparable to Italian classics or even more.

Stanislav Azarovarchitect

"The price of a kitchen containing many drawers and lifting mechanisms will differ significantly from the cost of a model with a predominance of hinged facades"

Alexander Kuptsov , architect

The Classic, SieMatic finish features polished nickel and brushed dark oak.

Alexander Kuptsovarchitect

“The materials of facades and countertops are more significant. And of course, the size of the composition, depending on the area of ​​\u200b\u200bthe room "

• The cost of a kitchen is primarily determined by the brand. The complexity of the mechanisms, the number and type of boxes do not fundamentally affect the price order. Like style: in any style there are manufacturers of different price categories. The materials of facades and countertops are more significant. And, of course, the size of the composition, depending on the area of ​​​​the room.

• The cost of household appliances also directly depends on the reputation of the factory. It would be strange to install budget appliances in the kitchen of the top segment. Since pricing mainly depends on the "coolness" of the manufacturer, it is difficult to talk about a specific amount, rather, you can deduce the percentage of the kitchen in the total furniture budget, again, taking into account the size of the apartment or house.

Anna Smirnova, decorator.

Anna Smirnovadecorator

“If the owners like to cook (oddly enough, more often it is the owner, a man) — we pay attention to household appliances, we choose the most advanced and expensive stoves and refrigerators”

The SineTempore Valcucine collection reinterprets classic motifs with a contemporary twist, making it an authentic timeless kitchen.

• To estimate the budget for a kitchen, you first need to determine who it is being created for. If for the owners, then it should be a front, beautiful kitchen with decent household appliances. If we are talking about a working kitchen where service personnel will be preparing, then you should not invest in super-expensive facades and fancy stoves, although, of course, everything should be of high quality and functional. In the front kitchen, a lot depends on the preferences of the customer.

• If the owners want to impress with aesthetics, we focus on expensive finishes, and sometimes even come up with unique facades specifically for the project. And then it is this component that gives the greatest load on the price. If the owners like to cook (oddly enough, more often it is the owner, a man) - we pay attention to household appliances, we choose the most advanced and expensive stoves and refrigerators. In general, today there is a general trend towards savings: people want to see beautiful cuisine, but are not ready to pay only for the brand.

Nikita Morozov, architect.

Nikita Morozovarchitect

“A new trend is very thin facades, only 12-16 mm, where the door is laid with a metal insert. Such programs are especially expensive”

A unique material - petrified wood - gives an incomparable look to the new kitchen. Kitchen Essence, Toncelli.

• The budget is heavily influenced by internal content. Closers, doors that go into grooves - all this significantly increases the cost of furniture. For a large project, the price of a top-segment kitchen starts from 2. 5 million and can reach 4-5 million. At the same time
there is no direct dependence on style: a classic kitchen, even with a gilded facade, will not be much more expensive than a modern one, primarily because of the internal content.

• Naturally, the price is very dependent on the material - if expensive woods or even solid wood are used on the facade, this makes the kitchen super expensive. A new trend is very thin facades, only 12–16 mm, where the door is lined with a metal insert. Such programs are especially expensive.

• Household appliances, as a rule, make up 20 percent of the cost of furniture. Sometimes there are projects where you need to supply some kind of super-refrigerator and semi-professional equipment - here the bill goes to tens of thousands of euros.

How much does it cost to make a kitchen yourself

In the store, my wife and I liked the kitchen for 420,000 R. I made a similar one myself and paid half as much.

Sergey Smetanin

made the kitchen himself

Author profile

In 2018, my wife and I bought an apartment in St. Petersburg. They searched for a kitchen in it for a whole month: they looked at the First Furniture Factory, Maria, and dozens of small manufacturers. The wife explained to the consultants what cabinets and doors she needed - they are called modules and facades. And I looked at the quality and price. But we didn't find anything suitable.

My profession is not furniture assembly, I'm in marketing. But in stores, it seemed to me that the kitchens were arranged quite simply, and I decided to make my own. I drew a project, chose materials and ordered a cut. Then I bought a countertop, accessories, tools - and assembled the kitchen on my own.

I’ll tell you how much time and money I spent, and also what I could save on, but didn’t.

I made this kitchen myself

Why I decided to make the kitchen myself

In each salon, we drew a project on a computer to fit the room. We needed a corner kitchen with a total length of 430 cm: on one wall - 186 cm, on the other - 244 cm. Manufacturers made modules of standard width: 30, 35, 40 cm, and so on with a step of 5 cm. It was easy to assemble a kitchen from them desired length.

However, we did not like the height of the kitchens. We wanted our kitchen to be up to the ceiling. So it would look harmonious, and rubbish would not accumulate under the ceiling. All manufacturers offered us such options that left either 34 or 54 cm of free space under the ceiling.

We also wanted to make two rows of upper cabinets. The first one is of standard height, 72 cm, and the second above it is non-standard, 54 cm. But the manufacturers did not do such things or they increased the price.

As a result, we liked one kitchen project from Maria. That kitchen cost 420,000 R - this is with assembly, but without appliances, a sink and a faucet.

I wanted to buy this kitchen, but I realized that, in fact, the materials for it cost much less than 400,000. In addition, in the previous apartment, I assembled cabinets and knew that there was nothing complicated in the design of furniture. And I just didn’t want to overpay for the brand.

Furniture forums:
MakeFurniture,
Forumhouse,
Mastergrad

On furniture forums, I found photos of kitchens that people made themselves from scratch. I read that many companies make custom boards for cabinets and facades. And they even glue the cut edge - a decorative tape - in place. And the prices there are quite reasonable.

I decided to assemble the kitchen myself. Even savings went by the wayside, it was so interesting what would happen in the end. My wife and child were going to go to the sea for two months. During this time, I promised her to make a kitchen. Next, I will tell you about all the stages of work.

This kitchen project for 420,000 R was drawn for us in Maria. The tabletop was made of quartz agglomerate, and the facades were made of MDF with enamel. Then we moved the stove away from the refrigerator

How I designed the kitchen

There were no cabinet sizes in Maria's kitchen project. I calculated them myself and made a new project. To do this, I found out the standard sizes and downloaded the design program.

Standard module sizes. I read on the Internet that the width of the modules is made to your taste in increments of 5 cm. Only a built-in dishwasher needs a cabinet with a 45 cm or 60 cm opening. And for an oven - with a 60 cm opening. The appliances themselves are 4 mm narrower, but for embedding, you need a margin of 2 mm on the left and right.

/ya-ne-designer/

How we made the design project of the apartment ourselves

The lower modules are made 72 cm high, then it is comfortable for a person of average height to work in the kitchen. And I made the height for the upper cabinets the same as I planned: for the first row, the standard is 72 cm, for the second, 54 cm.

The bottom modules are made 46-52 cm deep. This way, there is a reserve for pipes at the back wall, and the tabletop protrudes forward and protects the doors. The depth of the upper modules is usually 30-35 cm. I don’t like deep cabinets: rubbish always accumulates near the back wall. Therefore, I chose the lower ones with a depth of 46 cm, and the upper ones - 30 cm.

It is easy to find standard sizes of kitchen modules on the Internet. Source: Vstroyka

Design program. There are many furniture designers on the Internet: "Kitchendrow", "Pro100", "Woody". I downloaded the free demo version of Pro100. In the paid one, it was possible to export data from the project to Excel and order materials with a ready-made table. It's convenient, but the paid version cost 90 000 R. I preferred to design in free and transfer the dimensions to Excel manually. I checked them three times.

I designed every day for two hours after work. Spent 10 days in total. The program was simple, I could do without it. I worked in it for a total of no more than four hours. The rest of the time I studied the forums. There was a lot of unnecessary correspondence, and to find the right one, I scrolled through more than one topic.

The longest I was looking for was how to indent between the modules in the corner where the two sides of the kitchen meet. Without indentation, the doors there could hit each other when opened. As a result, I didn’t find it, but estimated by eye and retreated 5 cm. It turned out very well.

This is what happened at the intermediate stage. Later, I removed two cabinets: above the refrigerator and high to the right of it. My wife wanted to build an oven and a microwave into it, but the cabinet turned out to be too bulky. On the draft line, closer to the drawing, they showed the dimensions of the modules. I didn't pay attention to the rest. In general, the program did not help me: I could draw the same thing on paper. Between these doors, I indented 5 cm so that they would not hit each other when opened

How I ordered materials for the frame

Frame are cabinets with shelves without doors. They are made from chipboard. On the ends where the saw was cut, a plastic edge is glued. And at the back, a HDF wall is nailed to the closet to cover the wallpaper.

I googled chipboard cutting companies and sent them the dimensions and number of boards. Almost everyone answered, but most did not have their own material. I had to buy and bring sheets of laminated chipboard and HDF of 4 m², and they would cut the boards of the right size. I cut off such options.

/airplanety/

Business: making furniture out of old airplanes

I found a company where they brought everything for free, because the store with materials was in the same building. The company manager himself calculated that I needed four sheets of chipboard 16 mm thick, two sheets of HDF and 150 m of edges. He also advised taking moisture-resistant materials from Egger. They cost 13,434 R. I paid for them online and sent a check to the sawing company. I paid another 9074 rubles for sawing and edging.

It was possible to order additives - holes for fasteners for door hinges. But cutting each one cost 120 R. Plus, I would have to calculate the distances between the holes myself and make drawings for cutting. I decided to make additives myself and saved 6000 R.

Cutting Company

I took the finished boards in 10 days.

In order not to pay for the delivery, I transported the boards in my car I took up the entire trunk and back seat

How I chose the facades

While we were making the boards for the frame, I read on the forums about the facades, they are also doors. There are a lot of types of facades, but I considered four: with film, with plastic coating, from solid wood and from MDF with enamel. That's what I understood.

Facades with film are made of chipboard - this is a board made of wood chips. The chips are mixed with a sticky mass and pressed under high pressure at high temperature.

Colored or wood effect film coating. Facades with it are the cheapest, but they look simple and are afraid of moisture, and the film peels off over time. I didn't take these.

/remont-ne-vechen/

How much does repair cost: 5 examples - from quick and budget to endless But they need to be washed frequently: fingerprints and streaks are very noticeable on shiny plastic, especially in the sun. Therefore, I also refused them.

Solid wood facades are the most beautiful, but impractical. They are made of natural wood, and it is afraid of moisture. In addition, such facades are the most expensive. I asked on the forum which array to buy within 6000 R per 1 m². They answered that it was only domestic, and everyone scolded him. Maybe it's just a habit to scold everything Russian, but I didn't check it and threw that option away.

Facades with enamel are made from MDF. This is a board made of finer sawdust than chipboard. They are fastened with paraffin: it is environmentally friendly, dense and not so afraid of moisture. The plate is primed, and then covered with several layers of enamel - a special paint. Such facades are a little cheaper than those from the array. But they look good, are easy to clean, do not fade and serve for a long time. I chose them.

My front made of MDF with enamel

How I ordered fronts

On the Internet I found many companies that made fronts to order. But mostly they were intermediaries, and I was looking for a manufacturer so as not to overpay. I expected to find a large plant, but Googled a small production with a couple of people on staff.

Facade manufacturer in St. Petersburg - "Yellow Facade"

In the office I was given a price list and offered to choose the color and shape of the facade. I quickly decided on the color, but I didn’t like the shape. Then I drew a facade on paper, and the master sketched a drawing for the CNC machine with me.

I ordered boards for the frame without additives - holes where fasteners are screwed. I made them myself. And with the facades, I decided not to risk it. Additives cost 150 R, and for 50 pieces I gave 7500 R.

I needed 38 facades with a total area of ​​8.2 m². They cost 45,790 R, an average of 1,205 R per facade. I signed a contract and left an advance payment - 30,000 rubles.

They promised to do the facades in 10 days, but they did it only in 17 days. But as an apology, they delivered it for free, and I didn’t have to shove them around the car.

A sea of ​​useful articles about finance

In your mail twice a week. We only talk about what concerns you and your money

How I bought fittings

Fittings are handles, door hinges, systems for pulling drawers and other little things. I bought everything at GTV-Meridian and Leroy Merlin.

My wife chose expensive pens , 448 R. But I didn’t argue: I hoped that borscht in the kitchen would be tastier with them. For 36 pens I paid 16,128 R.

Handles for my kitchen

Hinges bought the ones recommended by a consultant in a hardware store. I don't remember the name, but they were with closers. Closers slow down the closing of the door or drawer. You can take a plate from the shelf and let go of the door without fear of a crash. Each hinge cost 175 R, and 46 pieces cost 8050 R.

Drawer systems I chose the longest. I looked at different manufacturers in repair shops: from the popular Austrian "Bloom" to Chinese nonames. On furniture forums, everyone advised "Bloom" - I took it. I compared prices on the Internet and found where the systems are cheaper. For ten pieces, including the bottle holder, I gave 40 097 R. Not cheap, but I was sure of the quality.

Bloom drawer systems

Fasteners, hanging rails, furniture ties and legs I took the first ones that came across in Leroy Merlin. Ties are needed to connect boards into cabinets, and tires and awnings are needed to hang these cabinets on the wall. All the little things cost 25,211 R.

How I bought the countertop

I chose from five types of countertops: natural stone, solid wood, acrylic, chipboard and quartz agglomerate. There were also glass and metal ones, but I considered them exotic.

I read on the forums that stone countertops are practical and beautiful, but the most expensive. From the array - impractical: if water gets on a bare tree where the varnish is scratched, it will swell overnight. Acrylic countertops scratch easily and should not be placed hot. I immediately dismissed all these options.

The cheapest countertops are made of chipboard covered with plastic. They are afraid of water, but only if it gets under the plastic. If not scratched, the countertop will last at least eight years. And then it is easy to change it: buy and saw the panel in the store and install it yourself. I wanted to take such a tabletop. From a good manufacturer, this would cost 10,000 R.

But my wife asked for a quartz countertop. Only natural stone was more expensive, but I think quartz is not inferior to it in quality. I could order a countertop from the manufacturer and install it myself. Then I would have to saw quartz, lay the slab on lockers alone and level it. And she weighed 60 kg. I decided to order all the work in the store where I bought the countertop. It cost 63,000 rubles with the work.

/beton/

Business: concrete furniture in Moscow

A week after the measurement, the master brought the countertop and began to install it. The opening under the sink turned out to be larger than necessary, and a piece of the stove was damaged. The master said that 20,000 R would be deducted from his salary for this, and I had to wait another week.

My countertop made of quartz agglomerate for 63,000 R

What tools were needed for assembly

I already had a screwdriver. With it, it is quick and easy to tighten the ties. You can do without it and use ordinary screwdrivers. But then the calluses are provided, and the assembly will take more time.

Bosch Screwdriver - 6244 P

Hammer drill needed to make holes and attach the hanging rail. I took the device from a friend.

Mac Allister Hammer Drill - 5311 R

Forstner drill is needed to make additives for the hinges on the doors. A loop is inserted into these round recesses to be screwed later. A drill with a diameter of 35 mm cost 280 R.

Forstner drill for wood, 35 mm - 364 P

Furniture jigs are templates for holes for hinges, handles and fasteners. Without them, you yourself will have to figure out where to make each hole, and this is a long time, and besides, you can make a mistake. A template for hinges cost 300 R, for ties - 800 R, for handles - 450 R.

Templates:
for hinges - 300 R,
for handles - 500 R,
for ties - 700 R I gave the conductors 1550 R. But they could have been made by myself

How I assembled the kitchen

I assembled the kitchen for two days off. First, I made a frame and hung the upper modules, then installed the equipment and attached the facades. The master installed the countertop for me, but I fixed the sink and hob myself.

The kitchen was easy to assemble. The hardest part was installing the drawers. The gap between them was only 2 mm, and everything had to be done evenly. The designer "Bloom" helped me, with him I accurately marked the holes and guides for the boxes. It is not suitable for systems from other manufacturers. Perhaps they have their own programs.

Designer "Bloom"

I also hung the facades quickly, because they already had additives on them. I just screwed the hinges, and at the end - the handles.

I did the layout of the drawer fronts in the Bloom designer

How I could save money

I chose expensive materials for the kitchen. And here's what I could save on without losing quality.

112,057 R

would be worth my no-frills kitchen

Countertop. For a chipboard top with plastic, I would pay 10,000 R, and not 63,000 R, as for a quartz agglomerate.

The second row of upper modules cost 22,000 R. But it was possible to do without it.

Drawers could have been made smaller. With the bottle I got ten pieces, but instead of some I could put ordinary cabinets. And instead of a narrow drawer under the oven - a blank panel.

I bought Bloom retractable systems, and the same Ikea sells analogues at 30% cheaper. The reviews for them are good. By taking them, I would save about 10,000 R.

Closers for door hinges are optional. I could save 1,500 rubles on them.

I took moisture-resistant laminated chipboard for the frame out of caution: something might spill inside the boxes. But I realized that I need to try very hard to make it happen. It was possible to buy an ordinary laminated chipboard and save 2500 R.

The 1 mm thick edge looks beautiful. But at the cut, they told me that 0.4 mm is no worse. But it would cost 2000 R cheaper.

Furniture jigs are simply wooden templates. You can make them yourself, and not spend 1550 R.

YouTube: How to make furniture jigs yourself

DIY kitchen cost me 204,607 R

What I bought Quantity Price per piece Total cost
Worktop 1 pc. 63 000 Р 63 000 Р
Front 38 pcs. 1205 R 45 790 Р
Drawer system 9 pcs. 3833 P 34497 Р
Handles 36 pcs. 448 P 16128 Р
Chipboard 16 mm 4 sheets 2359 P 9436 P
Sawing and edging - - 9074 P
Closer hinge 46 pcs. 175 P 8050 R
Bottle holder 1 pc. 5600 P 5600 P
Canopy 28 pcs. 179 P 5012 R
Edge 150 m 19 P 2850 P
HDF 2 sheets 574 R 1148 P
Feet 43 pcs. 20 P 860 P
Tie template 1 pc. 800 P 800 P
Furniture coupler 500 pcs. 1 P 500 R
Handle template 1 pc. 450 P 450 P
Suspension bar 3 pcs. 144 R 432 P
Hinge template 1 pc. 300 P 300 R
Forstner drill 1 pc. 280 P 280 R
Tie-down 50 pcs. 4 P 200 P
Nails 200 pcs. 1 P 200 P

Worktop with work

Quantity

1 pc.

Price per piece

63,000 R

Total cost

63 000 Р

Quantity

38 pcs.

Price per piece

1205 R

Total cost

45 790 R

Drawer system

Quantity

90pcs.

Price per piece

3833 R

Total cost

34 497 R

Quantity

36

Price per piece

448 R

Total cost

16 128 R

DSP 16 mm

Number

4 sheets

Price per piece

2359 2

Total cost

9436 R

saw and outline

-

9000

Total cost

9074 R

Closer hinge

46 pcs.

Quantity

46 pcs.

Price per piece

175 R

Total cost

8050 R

Bottle holder

Quantity

1 pc.

Price per piece

5600 R

Total cost

5600 R

Quantity

28 pcs.

Price for a piece

179 R

Total cost

5012 R

edge

number

150 m

Price

19 ° P

574 R

Total cost

Price per piece

20 R

Total cost

Price per piece

800 R

Total cost

800 R

Furniture coupler

Quantity

500 pcs.

Price per piece

1 R

Total cost

500 R

Handle template

Quantity

1 pc.

Price per piece

450 R

Total cost

450 R

Suspension bar

Quantity

3 pcs.

Unit price

144 R

Total cost

432 R

Hinge template

Quantity

1 pc.

Price per piece

300 R

Total cost

Price per piece

280 R

Total cost

280 R

Intersection tie

Quantity

50 pcs.

Learn more