Home » Misc » Remove popcorn texture from ceiling

Remove popcorn texture from ceiling


How to Easily Remove Popcorn Ceiling

Very few things date a space like a popcorn ceiling—and not in a charming way. They're difficult to repair, hard to clean, and catch dust easily; but despite all these cons, their popularity exploded beginning in the late 1950s because they made easy work of finishing ceilings and hiding imperfections.

If it's time to redo a popcorn ceiling, there are three popular ways to take on the challenge: scrape, cover with a new layer of drywall, or skim coat with plaster to create a new textured ceiling.

How Much Does it Cost to Remove Popcorn Ceiling?

The national average for popcorn ceiling removal is $1,707, according to Home Advisor.

Removing popcorn ceiling can be a labor-intensive process that is best left to a licensed professional to ensure safe removal. In some cases, there may be asbestos present in the ceiling, so it’s always a good idea to consult with a pro before starting the project.

What is the Best Method for Removing Popcorn Ceilings?

Which is best? Depends on a lot of things, including the age and condition of the substrate (ceiling). We spoke with drywall and stucco expert Mike Poellinger, owner of Poellinger, Inc., in La Crosse, WI, who filled us in on everything a homeowner should know before deciding how to remove their popcorn ceiling. With his help, we break down the three methods to redoing popcorn ceilings below.

How to Scrape a Popcorn Ceiling

When scraping popcorn ceilings, you'll want to use a 4-inch utility knife or a drywall knife to chip away at the texture and create a smooth surface. You'll probably need to skim it with a thin layer of joint compound to smooth out imperfections, then sand it smooth before repainting.

Why do it?

This is by far the most common method of popcorn ceiling removal. Scraping your ceiling is a messy and slow process, but it's the most cost-effective and can be completed by one person. However, popcorn finishes and paint applied before 1979 often contained asbestos and lead, respectively, which could be toxic if sent airborne. If you live in an older home, purchase a home test for lead paint, and consult with an expert about testing for asbestos. If it tests positive, do not scrape it.

If your ceilings are not at risk for asbestos or lead paint, but they have been painted, it may be near impossible to scrape them, since the porous popcorn material will have soaked it up. Drywalling over them may be a better option.

Pro tip: Don’t spray your ceiling with water before you scrape

A lot of people spray their ceilings with water before scraping to loosen them up, but Poellinger doesn't recommend it. "Not only will it be a sloppy mess, but it will absorb into the ceiling and make it heavy; then it could start to expand and crack. It's more time-consuming, but it's best to scrape it dry."

How to Cover up with Drywall

Affix ceiling-grade gypsum board, which weighs significantly less than standard wall board, right over the existing popcorn ceiling. You'll need to securely screw it into the framing and be proficient at mudding and taping for a seamless job.

Why do it?

This is a better option than scraping if you have lead paint or asbestos, because you can encapsulate the harmful substance instead of sending it airborne. Plus, you'll get the smoothest possible finish, if you mud and tape properly. Alternatively, a team of pros will be able to complete the job in no time. Finally, if the ceiling has damage or if you already need to cut into it to reroute electrical or HVAC, you can make large cuts into the existing substrate without worrying about patching, since they'll soon be covered up anyway.

This method will come at a price—a 4-by-8-foot sheet of ceiling-grade gypsum board costs $9 apiece. It may also be difficult to maneuver the boards single handedly if you're DIYing it. And if you have crown molding, you'll likely have to remove it and replace it.

Pro tip: For a DIY removal project rent a drywall lift

Rent a drywall lift if you're DIY’ing it. It might cost about $40 per day (The Home Depot; location pricing varies), but it's safer and allows you to get a better handle on the material.

Skim Coat on a New Design

Yes, it's still a texture, but according to Poellinger, it's making a comeback—and it's fairly easy for homeowners to do themselves. Often found in older homes—pre-popcorn-era—this type of textured ceiling involves cleaning and prepping the existing substrate with quick-set drywall mud, applying a bonding agent like joint compound, and then applying a finish compound with a trowel or knife to create a new texture.

Why do it?

Many old-house owners want to recapture the history of the home, and a smooth ceiling won't fit the bill.

The most important consideration is to make sure the substrate is structurally secure, since adding a wet product could create more weight than the ceiling can handle and cause it to come down. You might need to consult with a contractor before getting started.

Pro tip: Don’t use ready-mixed material as your base

If you opt to skim coat, use a quick-set drywall mud, then touch it up with a ready-mixed joint compound. Don't use a ready-mixed material as your base, as it has a higher moisture content and contains silica, which is prone to causing some shrinkage, affecting your final look.

Do Popcorn Ceilings Have Asbestos?

If your home was built between the 1950s and 1980s, there is a chance that the popcorn ceilings contain asbestos, according to the Mesothelioma Center. The best way to determine if your popcorn ceilings contain asbestos is to hire an abatement professional, or you can purchase a test kit.

If you discover that your popcorn ceilings contain asbestos, don’t panic—and don’t try to remove it yourself. Removing it will cause the particles to escape into the air, making it easy for you and your family to breathe in the carcinogens. Leaving the ceiling intact poses no dangers.

If the ceilings must go, then it’s a good idea to call a professional abatement company to do the job.

11 Tips on How to Remove Popcorn Ceiling Faster and Easier

Popcorn ceilings were all the rage back in the '60s and '70s. Applying the texture to drywall and plaster ceilings was a quick and easy way to hide imperfections and didn't require any painting afterward.

But the rough texture catches lots of dust and cobwebs and it can be difficult to know how to remove popcorn ceiling. It can be a real pain to match if you have cracks or holes in need of patching. Figuring out how to remove a popcorn ceiling texture from a ceiling is a messy chore but worth the effort if the substrate underneath is in good shape. Here are some tips to take some of the pain out of popcorn ceiling removal.

Every editorial product is independently selected, though we may be compensated or receive an affiliate commission if you buy something through our links. Ratings and prices are accurate and items are in stock as of time of publication.

1 / 12

Family Handyman

Do a Scrape Test

Before you go to all the trouble of prepping the room, try scraping a small area while learning how to remove popcorn ceiling. Try it dry first, then dampen the texture with water and try again. Some texture comes off easily without water, but in most cases wetting is best. If the water doesn’t soak in and soften the texture, the ceiling has probably been painted or paint was added to the texture mix. In that case, wetting the ceiling may not help, and you’ll have to decide whether you want to tackle a really tough scraping job or choose another way to hide your popcorn ceiling.

2 / 12

Family Handyman

Test for Asbestos

Any popcorn ceiling installed before 1980 might contain asbestos—a known cause of lung cancer. Before trying to figure out how to remove any popcorn ceiling texture, contact your local health department and ask about getting a sample tested. So you’re wondering how to remove a popcorn ceiling with asbestos? If the test comes back positive, cover the popcorn with new drywall or tongue-and-groove planks, or hire an asbestos abatement contractor to help in removing popcorn ceiling.

3 / 12

Family Handyman

Prep for a Big Mess

Cover floors and walls with plastic drop cloths as you begin your how to remove popcorn ceiling project. Don’t use canvas drop cloths because water can soak through. Cleanup is easier with plastic too, because you can just ball it all up when you’re done working and throw it in the trash. Leave the plastic in place after popcorn ceiling removal to catch the mess you’ll make repairing and sanding the ceiling later.

4 / 12

Family Handyman

Get the Furniture Out

If possible, remove all furniture from the room you’ll be working in. When learning how to remove popcorn ceiling, it is messy work, and you won’t want furniture in your way every time you move the ladder around. If moving everything out of the room isn’t possible, cluster it and cover it with drop cloths.

5 / 12

Family Handyman

Remove Ceiling Fixtures and Fans

You might think it’s easier to leave light fixtures and ceiling fans in place as you figure out how to remove popcorn ceiling, but they’ll just be in your way and get covered with wet popcorn. Plus, you don’t want to accidentally spray water into an electrical fixture.

6 / 12

Family Handyman

Protect Can Lights From Water Spray

If you have recessed “can” lights, stuff newspaper or rosin paper inside them to keep them dry when completing a how to remove popcorn ceilings project. Also, make sure the power to those fixtures is turned off at the circuit breaker panel or fuse box.

7 / 12

Family Handyman

Wet it With a Pump Sprayer

For easier scraping and practically no dust during popcorn ceiling removal, use a garden pump sprayer to mist the ceiling and let it soak in for about 15 minutes before scraping. Only give it a light misting—too much water could damage the drywall or loosen the joint tape. If the texture hasn’t softened after 15 minutes or so, spray it again and wait another 10 to 15 minutes.

If the texture still hasn’t softened, it might be painted, or paint might have been mixed into the texture before application. In either case, water won’t easily penetrate. If the texture is painted, you might be able to dry-scrape it first to expose some of the unpainted texture and follow up with wet scraping. If the texture has paint mixed in, you might have to dry-scrape the whole ceiling or cover it up with drywall or T&G boards.

8 / 12

Family Handyman

Cover Electrical Boxes

Shut off the power to any electrical junction boxes in the ceiling and cover them with painter’s tape to keep the wiring dry when spraying water on the popcorn as you complete a how to remove popcorn ceilings project. Overlap the sides of the junction box with the tape, and then trim around the perimeter with a utility knife, being careful not to nick the wires.

9 / 12

Family Handyman

Work in Small Sections

Only spray and scrape a small area at a time—about 4 x 4 ft. If you work too large of an area at once, the popcorn might dry before you have time to scrape it off. If that happens, respray the area and wait another 10 to 15 minutes before scraping.

10 / 12

Family Handyman

Tame the Mess With a Mud Pan

Use a mud pan—the kind for holding joint compound—to catch the wet popcorn before it hits the floor. That way, you’re not tracking it all over the place when you walk and move the ladder around. Also, use the edge of the pan to clean off your scraper when it gets loaded up with wet popcorn.

11 / 12

Family Handyman

Prevent Gouging

Round off the corners of your popcorn scraper—whether it’s a wide putty knife or drywall taping knife—so it won’t gouge the ceiling and leave you with dozens of ceiling wounds to repair. Use a file, a sander or an electric grinder to do this.

12 / 12

Family Handyman

Smooth After Scraping

Scraping alone won’t leave you with a paint-ready ceiling. You’ll probably have small dings and gouges to fix. At a minimum, you’ll have to sand the ceiling to get it perfectly smooth before painting.

Originally Published: October 17, 2019

How to remove the texture of popcorn from the ceiling, which was painted in stages with your own hands

Removing popcorn from the ceiling is not a difficult task, but it requires a lot of work and preparation. Hiring a contractor is one option, but we will show you below how to remove popcorn from the ceiling ourselves.

1. Protect the floor and large furniture with plastic rags.
Move small and medium items out of the way.
Cover large items such as a sofa or large furniture.
pieces of cloth to prevent material from falling on them.

2. Using a spray gun or pump sprayer, wet the ceiling texture to soften
aged material and minimize the release of dust into the air when material is removed.
Don't wet the ceiling, make it nice and wet.
If you wet the ceiling with water, it will damage the paper surface underneath.


3. Clean the ceiling with smooth, long strokes.
Apply even pressure to the ceiling when cleaning.
Continue all over the ceiling until the popcorn is gone.
If your ceiling texture is painted, scrape off the top of the
texture before wetting to expose the underlying surface.
Then dampen the surface as soon as the colored material disappears.

4. When the ceiling is finished and all the popcorn material has been removed,
Sand the ceiling smooth and apply a primer coat of paint to fix and uniform the ceiling.

ADDITIONAL TIPS - Preparation is the key to making the job much easier. Covering the furniture is the biggest part, besides the actual scraping of the material. Cover floors and furniture with plastic sheeting. Also don't forget to remove the lights from the ceiling.

A new product has been released that can make this job much easier.
The tool is Homax Ceiling Texture Scraper 6100 .
This scraper is extra wide so you get the job done faster, but it does have a bag that you can attach to.
to it, which actually catches most of the material that might fall on the floor.

This product can also make it easier to remove popcorn ceiling texture.
V Dustless vacuum sander for ceilings and drywall fit on a regular vacuum cleaner and
catches all the particles of the ceiling and/or walls so as not to form a mess.

WARNING: Ceiling texture applied prior to 1979 must not be removed without being tested for asbestos. Asbestos fibers can cause serious health problems, including cancer. Until the 1980s, asbestos was used in building materials and industrial products, including popcorn ceiling textures. Contact the EPA for more information or have it tested by a professional testing company.

HOW TO REMOVE THE POPCORN CEILING

So, your room has a textured or popcorn ceiling that just screams 1960s doctor's office and you want it to disappear - stat. But is it possible to take on this project? The pros say yes! Removing popcorn ceilings is a very inexpensive DIY project, says Justin Kshiston, a contractor in Los Angeles. And in fact, he adds, you probably already have all the tools you need.

However, if you don't have a solid collection of tools, expect to spend about $500 on supplies, says Christopher Totaro, contractor and agent for Warburg Realty. In contrast, a professional would probably charge anywhere from $1,500 to $2,000 for a 20 foot by 20 foot ceiling. Keep in mind that you will also need tools to paint the ceiling when you are done. While the tools and materials are usually not all that expensive, it's important to be aware that you're making a commitment. Depending on the size of the room, removing the popcorn ceiling can take a lot of time and effort, says Kevin Bush, vice president of operations for Mr. Neighborhood company.



value 10 10

But before you get started, here's one very important caveat: According to Kshiston, because asbestos was often used in popcorn ceilings before the early 1980s, you should have the surface checked by a professional before proceeding with any painting or removal.


Kshiston says that if the samples come back positive, it's for the health and safety of you and your family to call a licensed asbestos company. But they come back negative, you can safely continue your project. Here's how to do it.

What you need to remove the popcorn ceiling

How to Remove Popcorn from the Ceiling

Save Pin It View More Images

Credit: SDI Productions / Getty Images.



1. Prepare area

Cover the room first. Although it's not difficult, it's very sloppy says Kshiston. Have sufficient rags and tarps on hand and remove as much furniture from the room as possible; cover everything else. It's also a good idea to take off the lighting fixtures, turn off the HVAC system, cover and cover all vents and electrical outlets with plastic. And since this job involves water, be sure to turn off the electricity in the room you're working in. Finally, open the windows to allow air to circulate and make breathing easier during the scraping.

what does it mean to see 444

2. Wet the ceiling.

To make cleaning easier, according to Kshiston, spray the ceiling with water before gently scraping away the texture of the popcorn. Use a water spray bottle to wet a four-foot-by-four-foot ceiling, let sit for 15 minutes to absorb water, then scrape off. It is useful to work with such small areas, otherwise the areas will dry before you reach them.

3. Scrape off the coating.

To scrape, use a wide trowel or drywall knife and gently run it across the wet ceiling, being careful not to gouge the ceiling underneath. Move around the room until all texture is removed. When you're done, check your work - you may need a second pass in some areas. Remember that you can always refinish the ceiling to make it easier to work in a difficult spot, Kshiston says.



4. Add a fresh coat of paint.

"Since you already have the floor and walls, it's time to get to the finishing touches," says Kshiston, which includes sanding, priming, and painting the ceiling.

Learn more